Most of the IIO drivers initialize to INDIO_DIRECT_MODE mode. Some initialize to INDIO_BUFFER_SOFTWARE as a way to create an IIO device that is just mostly an IIO buffer. All IIO devices initialize the 'modes' parameter. Since this is overwritten, might as well make INDIO_DIRECT_MODE the default. This would not affect any current IIO driver. Then for the IIO devices that only have direct-mode, this initialization can be removed, since it becomes boiler-plate code. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> --- drivers/iio/industrialio-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index c2e4c267c36b..c1c8bde54444 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -1558,6 +1558,7 @@ struct iio_dev *iio_device_alloc(struct device *parent, int sizeof_priv) dev->dev.parent = parent; dev->dev.groups = dev->groups; dev->dev.type = &iio_device_type; + dev->modes = INDIO_DIRECT_MODE; dev->dev.bus = &iio_bus_type; device_initialize(&dev->dev); dev_set_drvdata(&dev->dev, (void *)dev); -- 2.27.0
