On Thu, 12 Nov 2020 at 14:39, Daniel Lezcano <daniel.lezcano@xxxxxxxxxx> wrote:
>
>
> Shall I take patch 1/15 and 12/15 ?
12/15 will not compile without several previous patches, so it might
be better to take all of them through the single tree.
>
>
>
> On 02/11/2020 18:49, Dmitry Baryshkov wrote:
> > This patch serie adds support for thermal monitoring block on Qualcomm's
> > PMIC5 chips. PM8150{,b,l} and sm8250-mtp board device trees are extended
> > to support thermal zones provided by this thermal monitoring block.
> > Unlike the rest of PMIC thermal senses, these thermal zones describe
> > particular thermistors, which differ between from board to board.
> >
> > Changes since v8:
> > - Simplified qcom_vadc_map_voltage_temp() code by removing ascending
> > tables support
> > - Simplified qcom-vadc-common volt/temp mapping code
> > - Implement suggestions by Matthias Kaehlcke: message formatting,
> > rewrite comments, remove unused variable initialization.
> >
> > Changes since v7:
> > - Move qcom-vadc-common.h header to include/linux/iio/adc/ dir.
> > - Use explicit sizeof(var) instead of hand-coding 1 when accessing
> > adc-tm registers.
> > - Remove buffer read from adc_tm5_init().
> > - Remove extra on-stack var from adc_tm5_get_temp().
> > - Minor formatting changes as suggested Daniel.
> >
> > Changes since v6:
> > - Added include <linux/bitfield.h> as noted by Jishnu Prakash.
> >
> > Changes since v5:
> > - Reworked DT bindings:
> > * Removed qcom,adc-channel, instead it is parsed from io-channels
> > * Renamed qcom,hw-settle-time to include -us suffix
> > - Re-added monitor enabling which got lost during refactored. Noted by
> > Jishnu Prakash.
> > - Use threaded IRQ handler as susggested by Jishnu.
> >
> > Changes since v4:
> > - Added kernel-doc comments to ADC-TM structures
> > - Used several sizeof(buf) instead of hand-conding register size
> >
> > Changes since v3:
> > - Fix DT description to spell "thermal monitoring" instead of just TM
> > - Fix warnings in DT example
> > - Add EXPORT_SYMBOL_GPL(of_iio_channel_get_by_name)
> > - Fixed whitespace chanes in qcom-vadc-common.c
> > - Removed error message if IIO chanel get returns -EPROBE_DEFER
> >
> > Changes since v2:
> > - IIO: export of_iio_channel_get_by_name() function
> > - dt-bindings: move individual io-channels to each thermal monitoring
> > channel rather than listing them all in device node
> > - added fallback defaults to of_device_get_match_data calls in
> > qcom-spmi-adc5 and qcom-spmi-adc-tm5 drivers
> > - minor typo fixes
> >
> > Changes since v1:
> > - Introduce fixp_linear_interpolate() by Craig Tatlor
> > - Lots of syntax/whitespace changes
> > - Cleaned up register definitions per Jonathan's suggestion
> > - Implemented most of the suggestions from Bjorn's and Jonathan's
> > review
> >
> >
>
>
> --
> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>
> Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog
--
With best wishes
Dmitry
