Re: [PATCH v9 00/15] qcom: pm8150: add support for thermal monitoring

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Shall I take patch 1/15 and 12/15 ?



On 02/11/2020 18:49, Dmitry Baryshkov wrote:
> This patch serie adds support for thermal monitoring block on Qualcomm's
> PMIC5 chips. PM8150{,b,l} and sm8250-mtp board device trees are extended
> to support thermal zones provided by this thermal monitoring block.
> Unlike the rest of PMIC thermal senses, these thermal zones describe
> particular thermistors, which differ between from board to board.
> 
> Changes since v8:
>  - Simplified qcom_vadc_map_voltage_temp() code by removing ascending
>    tables support
>  - Simplified qcom-vadc-common volt/temp mapping code
>  - Implement suggestions by Matthias Kaehlcke: message formatting,
>    rewrite comments, remove unused variable initialization.
> 
> Changes since v7:
>  - Move qcom-vadc-common.h header to include/linux/iio/adc/ dir.
>  - Use explicit sizeof(var) instead of hand-coding 1 when accessing
>    adc-tm registers.
>  - Remove buffer read from adc_tm5_init().
>  - Remove extra on-stack var from adc_tm5_get_temp().
>  - Minor formatting changes as suggested Daniel.
> 
> Changes since v6:
>  - Added include <linux/bitfield.h> as noted by Jishnu Prakash.
> 
> Changes since v5:
>  - Reworked DT bindings:
>    * Removed qcom,adc-channel, instead it is parsed from io-channels
>    * Renamed qcom,hw-settle-time to include -us suffix
>  - Re-added monitor enabling which got lost during refactored. Noted by
>    Jishnu Prakash.
>  - Use threaded IRQ handler as susggested by Jishnu.
> 
> Changes since v4:
>  - Added kernel-doc comments to ADC-TM structures
>  - Used several sizeof(buf) instead of hand-conding register size
> 
> Changes since v3:
>  - Fix DT description to spell "thermal monitoring" instead of just TM
>  - Fix warnings in DT example
>  - Add EXPORT_SYMBOL_GPL(of_iio_channel_get_by_name)
>  - Fixed whitespace chanes in qcom-vadc-common.c
>  - Removed error message if IIO chanel get returns -EPROBE_DEFER
> 
> Changes since v2:
>  - IIO: export of_iio_channel_get_by_name() function
>  - dt-bindings: move individual io-channels to each thermal monitoring
>    channel rather than listing them all in device node
>  - added fallback defaults to of_device_get_match_data calls in
>    qcom-spmi-adc5 and qcom-spmi-adc-tm5 drivers
>  - minor typo fixes
> 
> Changes since v1:
>  - Introduce fixp_linear_interpolate() by Craig Tatlor
>  - Lots of syntax/whitespace changes
>  - Cleaned up register definitions per Jonathan's suggestion
>  - Implemented most of the suggestions from Bjorn's and Jonathan's
>    review
> 
> 


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux