Added a missing comma and changed 'it it useful' to 'it is useful'. Signed-off-by: Ankit Baluni <b18007@xxxxxxxxxxxxxxxxxxxxxxx> --- drivers/staging/iio/Documentation/overview.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/iio/Documentation/overview.txt b/drivers/staging/iio/Documentation/overview.txt index ebdc64f451d7..00409d5dab4e 100644 --- a/drivers/staging/iio/Documentation/overview.txt +++ b/drivers/staging/iio/Documentation/overview.txt @@ -9,7 +9,7 @@ The aim is to fill the gap between the somewhat similar hwmon and input subsystems. Hwmon is very much directed at low sample rate sensors used in applications such as fan speed control and temperature measurement. Input is, as its name suggests focused on input -devices. In some cases there is considerable overlap between these and +devices. In some cases, there is considerable overlap between these and IIO. A typical device falling into this category would be connected via SPI @@ -38,7 +38,7 @@ series and Analog Devices ADXL345 accelerometers. Each buffer supports polling to establish when data is available. * Trigger and software buffer support. In many data analysis -applications it it useful to be able to capture data based on some +applications it is useful to be able to capture data based on some external signal (trigger). These triggers might be a data ready signal, a gpio line connected to some external system or an on processor periodic interrupt. A single trigger may initialize data -- 2.25.1
