On Mon, 23 Mar 2020 10:56:41 +0100 Mike Looijmans <mike.looijmans@xxxxxxxx> wrote: > On 22-03-2020 18:37, Jonathan Cameron wrote: > > On Mon, 16 Mar 2020 07:52:18 +0100 > > Mike Looijmans <mike.looijmans@xxxxxxxx> wrote: > > > >> This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU, > >> the accelerometer part. > >> > >> Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx> > >> --- > >> .../devicetree/bindings/iio/accel/bmi088.txt | 23 +++++++++++++++++++ > > > > Sorry. All new DT bindings need to be in yaml format. > > > > Please put this in the same series as the driver. > > sooy, I noticed this too late, patches are underway in separate mails > now. Hope that isn't a blocking issue? For next version of either pull them together. Jonathan > > > > > Thanks, > > > > Jonathan > > > >> 1 file changed, 23 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/iio/accel/bmi088.txt > >> > >> diff --git a/Documentation/devicetree/bindings/iio/accel/bmi088.txt b/Documentation/devicetree/bindings/iio/accel/bmi088.txt > >> new file mode 100644 > >> index 000000000000..691a47726dbc > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/iio/accel/bmi088.txt > >> @@ -0,0 +1,23 @@ > >> +* Bosch BMI088 IMU combining accelerometer and gyroscope > >> + > >> +https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf > >> + > >> +Required properties: > >> + > >> + - compatible : should be "bosch,bmi088_accel" > >> + - reg : the I2C address of the sensor or the SPI chip select number > >> + > >> +Optional properties: > >> + > >> + - interrupts : interrupt mapping for GPIO IRQ, it should be configured with > >> + IRQ_TYPE_EDGE_RISING > >> + > >> +Example: > >> + > >> +bmi088_accel@1 { > >> + compatible = "bosch,bmi088_accel"; > >> + reg = <1>; > >> + spi-max-frequency = <10000000>; > >> + interrupt-parent = <&gpio>; > >> + interrupts = <90 IRQ_TYPE_EDGE_RISING>; > >> +}; > > > >
