On Fri, 27 Dec 2019 11:22:54 +0100 Guido Günther <agx@xxxxxxxxxxx> wrote: > According to the data sheet the ambient sensor's scale is 0.12 lux/step > (not 0.024 lux/step as used by vcnl4200) when the integration time is > 80ms. The integration time is currently hardcoded in the driver to that > value. > > See p. 8 in https://www.vishay.com/docs/84307/designingvcnl4040.pdf > > Fixes: 5a441aade5b3 ("light: vcnl4000 add support for the VCNL4040 proximity and light sensor") > Signed-off-by: Guido Günther <agx@xxxxxxxxxxx> > Reviewed-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx> Applied to the fixes-togreg branch of iio.git. Thanks, Jonathan > --- > drivers/iio/light/vcnl4000.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c > index 16dacea9eadf..b0e241aaefb4 100644 > --- a/drivers/iio/light/vcnl4000.c > +++ b/drivers/iio/light/vcnl4000.c > @@ -163,7 +163,6 @@ static int vcnl4200_init(struct vcnl4000_data *data) > if (ret < 0) > return ret; > > - data->al_scale = 24000; > data->vcnl4200_al.reg = VCNL4200_AL_DATA; > data->vcnl4200_ps.reg = VCNL4200_PS_DATA; > switch (id) { > @@ -172,11 +171,13 @@ static int vcnl4200_init(struct vcnl4000_data *data) > /* show 54ms in total. */ > data->vcnl4200_al.sampling_rate = ktime_set(0, 54000 * 1000); > data->vcnl4200_ps.sampling_rate = ktime_set(0, 4200 * 1000); > + data->al_scale = 24000; > break; > case VCNL4040_PROD_ID: > /* Integration time is 80ms, add 10ms. */ > data->vcnl4200_al.sampling_rate = ktime_set(0, 100000 * 1000); > data->vcnl4200_ps.sampling_rate = ktime_set(0, 100000 * 1000); > + data->al_scale = 120000; > break; > } > data->vcnl4200_al.last_measurement = ktime_set(0, 0);