According to the data sheet the ambient sensor's scale is 0.12 lux/step (not 0.024 lux/step as used by vcnl4200) when the integration time is 80ms. The integration time is currently hardcoded in the driver to that value. See p. 8 in https://www.vishay.com/docs/84307/designingvcnl4040.pdf Fixes: 5a441aade5b3 ("light: vcnl4000 add support for the VCNL4040 proximity and light sensor") Signed-off-by: Guido Günther <agx@xxxxxxxxxxx> Reviewed-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx> --- drivers/iio/light/vcnl4000.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c index 16dacea9eadf..b0e241aaefb4 100644 --- a/drivers/iio/light/vcnl4000.c +++ b/drivers/iio/light/vcnl4000.c @@ -163,7 +163,6 @@ static int vcnl4200_init(struct vcnl4000_data *data) if (ret < 0) return ret; - data->al_scale = 24000; data->vcnl4200_al.reg = VCNL4200_AL_DATA; data->vcnl4200_ps.reg = VCNL4200_PS_DATA; switch (id) { @@ -172,11 +171,13 @@ static int vcnl4200_init(struct vcnl4000_data *data) /* show 54ms in total. */ data->vcnl4200_al.sampling_rate = ktime_set(0, 54000 * 1000); data->vcnl4200_ps.sampling_rate = ktime_set(0, 4200 * 1000); + data->al_scale = 24000; break; case VCNL4040_PROD_ID: /* Integration time is 80ms, add 10ms. */ data->vcnl4200_al.sampling_rate = ktime_set(0, 100000 * 1000); data->vcnl4200_ps.sampling_rate = ktime_set(0, 100000 * 1000); + data->al_scale = 120000; break; } data->vcnl4200_al.last_measurement = ktime_set(0, 0); -- 2.23.0
