This patch restructures the existing adxl372 driver by adding a module for SPI and a header file, while the baseline module deals with the chip-logic. This is a necessary step, as this driver should support in the future a similar device which differs only in the type of interface used (I2C instead of SPI). Signed-off-by: Stefan Popa <stefan.popa@xxxxxxxxxx> --- MAINTAINERS | 1 + drivers/iio/accel/Kconfig | 11 +++++-- drivers/iio/accel/Makefile | 1 + drivers/iio/accel/adxl372.c | 73 ++++++++++++++--------------------------- drivers/iio/accel/adxl372.h | 15 +++++++++ drivers/iio/accel/adxl372_spi.c | 52 +++++++++++++++++++++++++++++ 6 files changed, 102 insertions(+), 51 deletions(-) create mode 100644 drivers/iio/accel/adxl372.h create mode 100644 drivers/iio/accel/adxl372_spi.c diff --git a/MAINTAINERS b/MAINTAINERS index 2bfc9b0..2938632 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -548,6 +548,7 @@ M: Stefan Popa <stefan.popa@xxxxxxxxxx> W: http://ez.analog.com/community/linux-device-drivers S: Supported F: drivers/iio/accel/adxl372.c +F: drivers/iio/accel/adxl372_spi.c F: Documentation/devicetree/bindings/iio/accel/adxl372.txt AF9013 MEDIA DRIVER diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index eae23d6..bed5da8 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -61,15 +61,20 @@ config ADXL345_SPI for the core module. config ADXL372 - tristate "Analog Devices ADXL372 3-Axis Accelerometer Driver" - depends on SPI + tristate select IIO_BUFFER select IIO_TRIGGERED_BUFFER + +config ADXL372_SPI + tristate "Analog Devices ADXL372 3-Axis Accelerometer SPI Driver" + depends on SPI + select ADXL372 + select REGMAP_SPI help Say yes here to add support for the Analog Devices ADXL372 triaxial acceleration sensor. To compile this driver as a module, choose M here: the - module will be called adxl372. + module will be called adxl372_spi. config BMA180 tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver" diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index 5758ffc..c9c5db9 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_ADXL345) += adxl345_core.o obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o obj-$(CONFIG_ADXL372) += adxl372.o +obj-$(CONFIG_ADXL372_SPI) += adxl372_spi.o obj-$(CONFIG_BMA180) += bma180.o obj-$(CONFIG_BMA220) += bma220_spi.o obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o diff --git a/drivers/iio/accel/adxl372.c b/drivers/iio/accel/adxl372.c index fdaaa58..f1df89d 100644 --- a/drivers/iio/accel/adxl372.c +++ b/drivers/iio/accel/adxl372.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * ADXL372 3-Axis Digital Accelerometer SPI driver + * ADXL372 3-Axis Digital Accelerometer core driver * * Copyright 2018 Analog Devices Inc. */ @@ -20,6 +20,8 @@ #include <linux/iio/trigger_consumer.h> #include <linux/iio/triggered_buffer.h> +#include "adxl372.h" + /* ADXL372 registers definition */ #define ADXL372_DEVID 0x00 #define ADXL372_DEVID_MST 0x01 @@ -246,7 +248,8 @@ static const struct iio_chan_spec adxl372_channels[] = { }; struct adxl372_state { - struct spi_device *spi; + int irq; + struct device *dev; struct regmap *regmap; struct iio_trigger *dready_trig; enum adxl372_fifo_mode fifo_mode; @@ -565,7 +568,7 @@ static int adxl372_setup(struct adxl372_state *st) return ret; if (regval != ADXL372_DEVID_VAL) { - dev_err(&st->spi->dev, "Invalid chip id %x\n", regval); + dev_err(st->dev, "Invalid chip id %x\n", regval); return -ENODEV; } @@ -891,56 +894,45 @@ static const struct iio_info adxl372_info = { .hwfifo_set_watermark = adxl372_set_watermark, }; -static bool adxl372_readable_noinc_reg(struct device *dev, unsigned int reg) +bool adxl372_readable_noinc_reg(struct device *dev, unsigned int reg) { return (reg == ADXL372_FIFO_DATA); } +EXPORT_SYMBOL_GPL(adxl372_readable_noinc_reg); -static const struct regmap_config adxl372_spi_regmap_config = { - .reg_bits = 7, - .pad_bits = 1, - .val_bits = 8, - .read_flag_mask = BIT(0), - .readable_noinc_reg = adxl372_readable_noinc_reg, -}; - -static int adxl372_probe(struct spi_device *spi) +int adxl372_probe(struct device *dev, struct regmap *regmap, + int irq, const char *name) { struct iio_dev *indio_dev; struct adxl372_state *st; - struct regmap *regmap; int ret; - indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); if (!indio_dev) return -ENOMEM; st = iio_priv(indio_dev); - spi_set_drvdata(spi, indio_dev); - - st->spi = spi; - - regmap = devm_regmap_init_spi(spi, &adxl372_spi_regmap_config); - if (IS_ERR(regmap)) - return PTR_ERR(regmap); + dev_set_drvdata(dev, indio_dev); + st->dev = dev; st->regmap = regmap; + st->irq = irq; indio_dev->channels = adxl372_channels; indio_dev->num_channels = ARRAY_SIZE(adxl372_channels); indio_dev->available_scan_masks = adxl372_channel_masks; - indio_dev->dev.parent = &spi->dev; - indio_dev->name = spi_get_device_id(spi)->name; + indio_dev->dev.parent = dev; + indio_dev->name = name; indio_dev->info = &adxl372_info; indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; ret = adxl372_setup(st); if (ret < 0) { - dev_err(&st->spi->dev, "ADXL372 setup failed\n"); + dev_err(dev, "ADXL372 setup failed\n"); return ret; } - ret = devm_iio_triggered_buffer_setup(&st->spi->dev, + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, adxl372_trigger_handler, &adxl372_buffer_ops); @@ -949,8 +941,8 @@ static int adxl372_probe(struct spi_device *spi) iio_buffer_set_attrs(indio_dev->buffer, adxl372_fifo_attributes); - if (st->spi->irq) { - st->dready_trig = devm_iio_trigger_alloc(&st->spi->dev, + if (st->irq) { + st->dready_trig = devm_iio_trigger_alloc(dev, "%s-dev%d", indio_dev->name, indio_dev->id); @@ -958,15 +950,15 @@ static int adxl372_probe(struct spi_device *spi) return -ENOMEM; st->dready_trig->ops = &adxl372_trigger_ops; - st->dready_trig->dev.parent = &st->spi->dev; + st->dready_trig->dev.parent = dev; iio_trigger_set_drvdata(st->dready_trig, indio_dev); - ret = devm_iio_trigger_register(&st->spi->dev, st->dready_trig); + ret = devm_iio_trigger_register(dev, st->dready_trig); if (ret < 0) return ret; indio_dev->trig = iio_trigger_get(st->dready_trig); - ret = devm_request_threaded_irq(&st->spi->dev, st->spi->irq, + ret = devm_request_threaded_irq(dev, st->irq, iio_trigger_generic_data_rdy_poll, NULL, IRQF_TRIGGER_RISING | IRQF_ONESHOT, @@ -975,24 +967,9 @@ static int adxl372_probe(struct spi_device *spi) return ret; } - return devm_iio_device_register(&st->spi->dev, indio_dev); + return devm_iio_device_register(dev, indio_dev); } - -static const struct spi_device_id adxl372_id[] = { - { "adxl372", 0 }, - {} -}; -MODULE_DEVICE_TABLE(spi, adxl372_id); - -static struct spi_driver adxl372_driver = { - .driver = { - .name = KBUILD_MODNAME, - }, - .probe = adxl372_probe, - .id_table = adxl372_id, -}; - -module_spi_driver(adxl372_driver); +EXPORT_SYMBOL_GPL(adxl372_probe); MODULE_AUTHOR("Stefan Popa <stefan.popa@xxxxxxxxxx>"); MODULE_DESCRIPTION("Analog Devices ADXL372 3-axis accelerometer driver"); diff --git a/drivers/iio/accel/adxl372.h b/drivers/iio/accel/adxl372.h new file mode 100644 index 0000000..5da89b1 --- /dev/null +++ b/drivers/iio/accel/adxl372.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * ADXL372 3-Axis Digital Accelerometer + * + * Copyright 2018 Analog Devices Inc. + */ + +#ifndef _ADXL372_H_ +#define _ADXL372_H_ + +int adxl372_probe(struct device *dev, struct regmap *regmap, + int irq, const char *name); +bool adxl372_readable_noinc_reg(struct device *dev, unsigned int reg); + +#endif /* _ADXL372_H_ */ diff --git a/drivers/iio/accel/adxl372_spi.c b/drivers/iio/accel/adxl372_spi.c new file mode 100644 index 0000000..e14e655 --- /dev/null +++ b/drivers/iio/accel/adxl372_spi.c @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * ADXL372 3-Axis Digital Accelerometer SPI driver + * + * Copyright 2018 Analog Devices Inc. + */ + +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/spi/spi.h> + +#include "adxl372.h" + +static const struct regmap_config adxl372_spi_regmap_config = { + .reg_bits = 7, + .pad_bits = 1, + .val_bits = 8, + .read_flag_mask = BIT(0), + .readable_noinc_reg = adxl372_readable_noinc_reg, +}; + +static int adxl372_spi_probe(struct spi_device *spi) +{ + const struct spi_device_id *id = spi_get_device_id(spi); + struct regmap *regmap; + + regmap = devm_regmap_init_spi(spi, &adxl372_spi_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + return adxl372_probe(&spi->dev, regmap, spi->irq, id->name); +} + +static const struct spi_device_id adxl372_spi_id[] = { + { "adxl372", 0 }, + {} +}; +MODULE_DEVICE_TABLE(spi, adxl372_spi_id); + +static struct spi_driver adxl372_spi_driver = { + .driver = { + .name = "adxl372_spi", + }, + .probe = adxl372_spi_probe, + .id_table = adxl372_spi_id, +}; + +module_spi_driver(adxl372_spi_driver); + +MODULE_AUTHOR("Stefan Popa <stefan.popa@xxxxxxxxxx>"); +MODULE_DESCRIPTION("Analog Devices ADXL372 3-axis accelerometer SPI driver"); +MODULE_LICENSE("GPL"); -- 2.7.4
