Add reg addr and max_word_len parameters to st_lsm6dsx_read_block
since LSM6DSO will use a different register address to read samples
from the FIFO and a different sample len
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
---
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
index 7e02935a4250..2002ba4a1abd 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -255,18 +255,18 @@ static int st_lsm6dsx_reset_hw_ts(struct st_lsm6dsx_hw *hw)
* Set max bulk read to ST_LSM6DSX_MAX_WORD_LEN in order to avoid
* a kmalloc for each bus access
*/
-static inline int st_lsm6dsx_read_block(struct st_lsm6dsx_hw *hw, u8 *data,
- unsigned int data_len)
+static inline int st_lsm6dsx_read_block(struct st_lsm6dsx_hw *hw, u8 addr,
+ u8 *data, unsigned int data_len,
+ unsigned int max_word_len)
{
unsigned int word_len, read_len = 0;
int err;
while (read_len < data_len) {
word_len = min_t(unsigned int, data_len - read_len,
- ST_LSM6DSX_MAX_WORD_LEN);
- err = regmap_bulk_read(hw->regmap,
- ST_LSM6DSX_REG_FIFO_OUTL_ADDR,
- data + read_len, word_len);
+ max_word_len);
+ err = regmap_bulk_read(hw->regmap, addr, data + read_len,
+ word_len);
if (err < 0)
return err;
read_len += word_len;
@@ -316,7 +316,9 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
gyro_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_GYRO]);
for (read_len = 0; read_len < fifo_len; read_len += pattern_len) {
- err = st_lsm6dsx_read_block(hw, hw->buff, pattern_len);
+ err = st_lsm6dsx_read_block(hw, ST_LSM6DSX_REG_FIFO_OUTL_ADDR,
+ hw->buff, pattern_len,
+ ST_LSM6DSX_MAX_WORD_LEN);
if (err < 0) {
dev_err(hw->dev,
"failed to read pattern from fifo (err=%d)\n",
--
2.18.0
