On Tue, 16 Jan 2018 12:04:37 +0200 <alexandru.ardelean@xxxxxxxxxx> wrote: > From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> > Firstly, even a change to a description makes this a V2 patch not a resend. Resends should be identical and only occur if either: 1) Someone asks you to resend for some reason (wrong cc's perhaps) 2) It has been a long time since anyone responded and looks like your series has been forgotten. > According to the datasheet for all ad719x ADCs, > the burnout currents can be enabled only if buffer is enabled > and CHOP is disabled. > > So, if neither of these conditions are met, then > we should disable the burnout currents in the driver as well, > and warn the user. > > This change doesn't fix anything. > The burnout currents simply won't work if CHOP is enabled > or buffer is disabled. > The intent is to provide the user with some feedback > instead of silently not working inside the chip. > > This is especially useful when considering device-tree > support (and/or device-tree overlays) at a later point, > which will allow for a quicker/simpler reconfiguration > of the chip settings. > > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> Thanks, much better description. I'll pick this up when I'm next on the correct PC (possibly not until the weekend). Jonathan > --- > drivers/staging/iio/adc/ad7192.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c > index d11c6de9c777..7f204013d6d4 100644 > --- a/drivers/staging/iio/adc/ad7192.c > +++ b/drivers/staging/iio/adc/ad7192.c > @@ -266,6 +266,12 @@ static int ad7192_setup(struct ad7192_state *st, > > st->conf = AD7192_CONF_GAIN(0); > > + if (pdata->burnout_curr_en && (!pdata->buf_en || pdata->chop_en)) { > + pdata->burnout_curr_en = false; > + dev_warn(dev, > + "Can't enable burnout currents: see CHOP or buffer\n"); > + } > + > if (pdata->rej60_en) > st->mode |= AD7192_MODE_REJ60; > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html