Hi Jonathan, On Sat, Dec 2, 2017 at 12:30 PM, Jonathan Cameron <jic23@xxxxxxxxxx> wrote: > On Mon, 27 Nov 2017 15:47:14 -0800 > Kevin Hilman <khilman@xxxxxxxxxxxx> wrote: > >> Hi Jonathan, >> >> Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> writes: >> >> > On Tue, 31 Oct 2017 21:01:42 +0100 >> > Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> wrote: >> > >> >> Meson8 and Meson8b require that the driver initializes the registers >> >> correctly, while on GXBB and newer this is done by the firmware. >> >> Thus the changes from this series are only relevant for Meson8 and >> >> Meson8b. >> >> >> >> The first two patches are bugfixes: >> >> - the first patch fixes an issue where the SAR ADC would not work at >> >> all >> >> - the second patch initializes the bandgrap register on Meson8 and >> >> Meson8b (which is required for the SAR ADC to operate) >> >> >> >> The third patch is mainly a cosmetic fix because we don't want to >> >> read/write registers that are not documented. >> >> >> >> Patch four is purely cosmetic so the mainline driver uses the same >> >> settings as Amlogic's vendor kernel driver. >> >> >> >> The last patch initializes the channel muxes. There are sane defaults >> >> for these in the hardware itself. However, some bootloaders are >> >> setting strange values - the result is that reading the ADC gives >> >> garbage values. >> >> I did not tag this as "fix" since in my opinion it's a feature for >> >> fixing broken bootloaders. >> >> >> >> Tested on: >> >> - a Meson8m2 board (compatible with Meson8) >> >> - a Meson8b EC-100 >> >> - on a Khadas VIM to ensure that the newer SoCs are still working >> >> >> >> >> >> Martin Blumenstingl (5): >> >> iio: adc: meson-saradc: fix the bit_idx of the adc_en clock >> >> iio: adc: meson-saradc: initialize the bandgap correctly on older >> >> SoCs iio: adc: meson-saradc: Meson8 and Meson8b do not have REG11 and >> >> REG13 iio: adc: meson-saradc: fix the clock frequency on Meson8 and >> >> Meson8b iio: adc: meson-saradc: program the channel muxes during >> >> initialization >> >> >> >> drivers/iio/adc/meson_saradc.c | 92 >> >> +++++++++++++++++++++++++++++++++++------- 1 file changed, 78 >> >> insertions(+), 14 deletions(-) >> >> >> > Series seems fine to me. If no one else raises anything I'll pick this >> > up when I'm am back in the UK the week after next. >> >> Just a gentle ping on the status of this series as I'm not seeing it in >> linux-next. > > Sure, I'll be sending out a pull request including the first couple > of patches later today at which time they'll hit Greg's tree and show > up in linux-next. (patches 1, 2 and 3) > > The series was a spit of fixes and improvements that will take longer > as we'll have to wait for the fixes to go up to mainline and come > back to me - so will be a few weeks before I can apply those and they > won't hit linux-next for perhaps a week after that. > (this covers patches 4 and 5) do you want me to re-send patches 4 and 5 (or do you want to take them as they are) now that patches 0-3 are back in linux-next? Regards Martin -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
