Re: [PATCH 0/5] meson_saradc fixes and minor improvements

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 31 Oct 2017 21:01:42 +0100
Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> wrote:

> Meson8 and Meson8b require that the driver initializes the registers
> correctly, while on GXBB and newer this is done by the firmware.
> Thus the changes from this series are only relevant for Meson8 and
> Meson8b.
> 
> The first two patches are bugfixes:
> - the first patch fixes an issue where the SAR ADC would not work at
>   all
> - the second patch initializes the bandgrap register on Meson8 and
>   Meson8b (which is required for the SAR ADC to operate)
> 
> The third patch is mainly a cosmetic fix because we don't want to
> read/write registers that are not documented.
> 
> Patch four is purely cosmetic so the mainline driver uses the same
> settings as Amlogic's vendor kernel driver.
> 
> The last patch initializes the channel muxes. There are sane defaults
> for these in the hardware itself. However, some bootloaders are
> setting strange values - the result is that reading the ADC gives
> garbage values.
> I did not tag this as "fix" since in my opinion it's a feature for
> fixing broken bootloaders.
> 
> Tested on:
> - a Meson8m2 board (compatible with Meson8)
> - a Meson8b EC-100
> - on a Khadas VIM to ensure that the newer SoCs are still working
> 
> 
> Martin Blumenstingl (5):
>   iio: adc: meson-saradc: fix the bit_idx of the adc_en clock
>   iio: adc: meson-saradc: initialize the bandgap correctly on older
> SoCs iio: adc: meson-saradc: Meson8 and Meson8b do not have REG11 and
> REG13 iio: adc: meson-saradc: fix the clock frequency on Meson8 and
> Meson8b iio: adc: meson-saradc: program the channel muxes during
>     initialization
> 
>  drivers/iio/adc/meson_saradc.c | 92
> +++++++++++++++++++++++++++++++++++------- 1 file changed, 78
> insertions(+), 14 deletions(-)
> 
Series seems fine to me.  If no one else raises anything I'll pick this
up when I'm am back in the UK the week after next.

Thanks,

Jonathan

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux