On Sun, 19 Nov 2017 12:35:04 -0800 Matt Ranostay <matt.ranostay@xxxxxxxxxxxx> wrote: > On Fri, Oct 27, 2017 at 12:45 PM, Peter Meerwald-Stadler > <pmeerw@xxxxxxxxxx> wrote: > > Signed-off-by: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx> > > Cc: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx> > > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > > Reviewed-by: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx> > Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it. Thanks, Jonathan > > --- > > Documentation/devicetree/bindings/iio/health/max30102.txt | 8 ++++++-- > > 1 file changed, 6 insertions(+), 2 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/iio/health/max30102.txt b/Documentation/devicetree/bindings/iio/health/max30102.txt > > index 8629c18..ef2ca0a 100644 > > --- a/Documentation/devicetree/bindings/iio/health/max30102.txt > > +++ b/Documentation/devicetree/bindings/iio/health/max30102.txt > > @@ -1,9 +1,11 @@ > > Maxim MAX30102 heart rate and pulse oximeter sensor > > +Maxim MAX30105 optical particle-sensing module > > > > * https://datasheets.maximintegrated.com/en/ds/MAX30102.pdf > > +* https://datasheets.maximintegrated.com/en/ds/MAX30105.pdf > > > > Required properties: > > - - compatible: must be "maxim,max30102" > > + - compatible: must be "maxim,max30102" or "maxim,max30105" > > - reg: the I2C address of the sensor > > - interrupt-parent: should be the phandle for the interrupt controller > > - interrupts: the sole interrupt generated by the device > > @@ -12,8 +14,10 @@ Required properties: > > interrupt client node bindings. > > > > Optional properties: > > - - maxim,red-led-current-microamp: configuration for RED LED current > > + - maxim,red-led-current-microamp: configuration for red LED current > > - maxim,ir-led-current-microamp: configuration for IR LED current > > + - maxim,green-led-current-microamp: configuration for green LED current > > + (max30105 only) > > > > Note that each step is approximately 200 microamps, ranging from 0 uA to > > 50800 uA. > > -- > > 2.7.4 > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
