Re: [PATCH v4 8/8] iio: envelope-detector: ADC driver based on a DAC and a comparator

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/11/16 17:03, Peter Rosin wrote:
> On 2016-11-08 16:59, Thomas Gleixner wrote:
>> On Tue, 8 Nov 2016, Peter Rosin wrote:
>>> +/*
>>> + * The envelope_detector_comp_latch function works together with the compare
>>> + * interrupt service routine below (envelope_detector_comp_isr) as a latch
>>> + * (one-bit memory) for if the interrupt has triggered since last calling
>>> + * this function.
>>> + * The ..._comp_isr function disables the interrupt so that the cpu does not
>>> + * need to service a possible interrupt flood from the comparator when no-one
>>> + * cares anyway, and this ..._comp_latch function reenables them again if
>>> + * needed.
>>> + */
>>> +static int envelope_detector_comp_latch(struct envelope *env)
>>> +{
>>> +	int comp;
>>> +
>>> +	spin_lock_irq(&env->comp_lock);
>>> +	comp = env->comp;
>>> +	env->comp = 0;
>>> +	spin_unlock_irq(&env->comp_lock);
>>> +
>>> +	if (!comp)
>>> +		return 0;
>>> +
>>> +	/*
>>> +	 * The irq was disabled, and is reenabled just now.
>>> +	 * But there might have been a pending irq that
>>> +	 * happened while the irq was disabled that fires
>>> +	 * just as the irq is reenabled. That is not what
>>> +	 * is desired.
>>> +	 */
>>> +	enable_irq(env->comp_irq);
>>> +
>>> +	/* So, synchronize this possibly pending irq... */
>>> +	synchronize_irq(env->comp_irq);
>>> +
>>> +	/* ...and redo the whole dance. */
>>> +	spin_lock_irq(&env->comp_lock);
>>> +	comp = env->comp;
>>> +	env->comp = 0;
>>> +	spin_unlock_irq(&env->comp_lock);
>>> +
>>> +	if (comp)
>>> +		enable_irq(env->comp_irq);
>>
>> So you need that whole dance including the delayed work because you cannot
>> call iio_write_channel_raw() from hard interrupt context, right?
> 
> It's not the "cannot call from hard irq context" that made me do that, it's...
> 
>> So you might just register a threaded interrupt handler, which should make
>> this whole thing way simpler.
>>
>>      devm_request_threaded_irq(dev, irq, NULL, your_isr, IRQF_ONESHOT, ...);
>>
>> The core will mask the interrupt line until the threaded handler is
>> finished. The threaded handler is invoked with preemption enabled, so you
>> can sleep there as long as you want. So you can do everything in your
>> handler and the above dance is just not required.
> 
> ...that I couldn't work out how to reenable a oneshot irq once it had fired,
> short of freeing the irq and requesting it again. That seemed entirely
> bogus, the driver shouldn't risk losing a resource like that so I don't know
> what I didn't see? Or maybe it was that I had a hard time resolving the race
> between the irq and the timeout in a nice way. I honestly don't remember
> why exactly I abandoned oneshot irqs, but this enable/sync/enable dance
> was much nicer than what I came up with for the oneshot irq solution I
> originally worked on.
> 
> Or maybe I had problems with the possibly pending irq also when using a
> oneshot irq, but didn't realize it? That was something I discovered quite
> late in the process, some time after moving away from oneshot irqs. Are
> pending irqs cleared when requesting (or reenabling, however that is done)
> a oneshot irq?
> 
> Anyway, I do not want the interrupt to be serviced when no one is interested,
> since I'm afraid that nasty input might generate a flood of interrupts that
> might disturb other things that the cpu is doing. Which means that I need
> to enable/disable the interrupt as needed.
> 
> However, what *I* thought Jonathan wanted input on was the part where the
> interrupt edge/level is flipped when requesting "inverted" signals in
> envelope_store_invert(). That could perhaps be seen as unorthodox and in
> need of more eyes?
Nope, as far as I can recall it was precisely this dance that was 
I wanted Thomas to comment on :)  The inverted bit isn't as novel as
this ;)

Anyhow, thread ended up with a good conclusion so I'm happy.

Jonathan
> 
> Cheers,
> Peter
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux