Hi Rob, On 1 March 2016 at 21:33, Rob Herring <robh+dt@xxxxxxxxxx> wrote: > On Mon, Feb 29, 2016 at 1:05 PM, Joachim Eastwood <manabian@xxxxxxxxx> wrote: >> This patch set adds support for the analog (ADC and DAC) peripherals >> found on NXP LPC18xx/43xx SoCs. The ADC is a SAR converter with 10-bit >> resolution and 8 muxed inputs. The DAC is a simple single channel 10- >> bit DAC. >> >> Note that these drivers do not support all the features found on the >> peripherals. DMA and interrupts are not supported in either drivers. >> The ADC driver also lack 'burst-mode' and hardware triggers. So for >> now the ADC is limited to single shot samples. >> >> Both drivers tested on Embedded Artists' LPC4357 Developer's Kit. >> >> Based on iio/testing branch from 29.02.15. >> >> >> Joachim Eastwood (4): >> iio: adc: add NXP LPC18xx ADC driver >> dt: document NXP LPC1850 ADC driver bindings >> iio: dac: add NXP LPC18xx DAC driver >> dt: document NXP LPC1850 DAC driver bindings > > You need to send bindings to the DT list. ah, my bad. I was pretty sure I added it when I did format-patch, but it seems to have been lost along the way... Either way there will be a v2 and I will make sure to cc the DT list then. Thanks for reporting. regards, Joachim Eastwood -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
