On 29/02/16 19:05, Joachim Eastwood wrote: > This patch set adds support for the analog (ADC and DAC) peripherals > found on NXP LPC18xx/43xx SoCs. The ADC is a SAR converter with 10-bit > resolution and 8 muxed inputs. The DAC is a simple single channel 10- > bit DAC. > > Note that these drivers do not support all the features found on the > peripherals. DMA and interrupts are not supported in either drivers. > The ADC driver also lack 'burst-mode' and hardware triggers. So for > now the ADC is limited to single shot samples. > > Both drivers tested on Embedded Artists' LPC4357 Developer's Kit. > > Based on iio/testing branch from 29.02.15. Series looks pretty good. Will do a review of V2 - right now I haven't found anything to add to what Peter found. Nice little ADC from a quick read of the data sheet. Not too complex but still well featured. > > > Joachim Eastwood (4): > iio: adc: add NXP LPC18xx ADC driver > dt: document NXP LPC1850 ADC driver bindings > iio: dac: add NXP LPC18xx DAC driver > dt: document NXP LPC1850 DAC driver bindings > > .../devicetree/bindings/iio/adc/lpc1850-adc.txt | 21 ++ > .../devicetree/bindings/iio/dac/lpc1850-dac.txt | 20 ++ > drivers/iio/adc/Kconfig | 10 + > drivers/iio/adc/Makefile | 1 + > drivers/iio/adc/lpc18xx_adc.c | 226 +++++++++++++++++++++ > drivers/iio/dac/Kconfig | 10 + > drivers/iio/dac/Makefile | 1 + > drivers/iio/dac/lpc18xx_dac.c | 204 +++++++++++++++++++ > 8 files changed, 493 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt > create mode 100644 Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt > create mode 100644 drivers/iio/adc/lpc18xx_adc.c > create mode 100644 drivers/iio/dac/lpc18xx_dac.c > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
