On Mon, Feb 29, 2016 at 1:05 PM, Joachim Eastwood <manabian@xxxxxxxxx> wrote: > This patch set adds support for the analog (ADC and DAC) peripherals > found on NXP LPC18xx/43xx SoCs. The ADC is a SAR converter with 10-bit > resolution and 8 muxed inputs. The DAC is a simple single channel 10- > bit DAC. > > Note that these drivers do not support all the features found on the > peripherals. DMA and interrupts are not supported in either drivers. > The ADC driver also lack 'burst-mode' and hardware triggers. So for > now the ADC is limited to single shot samples. > > Both drivers tested on Embedded Artists' LPC4357 Developer's Kit. > > Based on iio/testing branch from 29.02.15. > > > Joachim Eastwood (4): > iio: adc: add NXP LPC18xx ADC driver > dt: document NXP LPC1850 ADC driver bindings > iio: dac: add NXP LPC18xx DAC driver > dt: document NXP LPC1850 DAC driver bindings You need to send bindings to the DT list. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
