This can lead to repeated or skipped samples depending on the clock beat
between the capture thread and the chip sampling clock, but will also spare
reading/waiting for the Capture Ready Flag and improve the available i2c
bandwidth for reading measurements.
Output of iio_info:
...snip...
4 device-specific attributes found:
attr 0: in_oversampling_ratio value: 4
attr 1: in_allow_async_readout value: 0
attr 2: integration_time_available value: 140 204 332 588 1100 2116 4156 8244
attr 3: in_sampling_frequency value: 114
Signed-off-by: Marc Titinger <mtitinger@xxxxxxxxxxxx>
---
drivers/iio/adc/ina2xx-iio.c | 48 ++++++++++++++++++++++++++++++++++++++------
1 file changed, 42 insertions(+), 6 deletions(-)
diff --git a/drivers/iio/adc/ina2xx-iio.c b/drivers/iio/adc/ina2xx-iio.c
index 99fb73c..7575a12 100644
--- a/drivers/iio/adc/ina2xx-iio.c
+++ b/drivers/iio/adc/ina2xx-iio.c
@@ -117,6 +117,7 @@ struct ina2xx_chip_info {
s64 prev_ns; /* track buffer capture time check, for underruns*/
int int_time_vbus; /* Bus voltage integration time uS */
int int_time_vshunt; /* Shunt voltage integration time uS */
+ bool allow_async_readout;
};
static const struct ina2xx_config ina2xx_config[] = {
@@ -333,6 +334,33 @@ _err:
}
+static ssize_t ina2xx_allow_async_readout_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev));
+
+ return sprintf(buf, "%d\n", chip->allow_async_readout);
+}
+
+static ssize_t ina2xx_allow_async_readout_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev));
+ bool val;
+ int ret;
+
+ ret = strtobool((const char *) buf, &val);
+ if (ret)
+ return ret;
+
+ chip->allow_async_readout = val;
+
+ return len;
+}
+
+
#define INA2XX_CHAN(_type, _index, _address) { \
.type = _type, \
.address = _address, \
@@ -399,11 +427,12 @@ static int ina2xx_work_buffer(struct iio_dev *indio_dev)
* GPIO a triggered buffer could be used instead.
* For now, we pay for that extra read of the ALERT register
*/
- do {
- ret = regmap_read(chip->regmap, INA226_ALERT_MASK,
- &alert);
- if (ret < 0)
- goto _err;
+ if (!chip->allow_async_readout)
+ do {
+ ret = regmap_read(chip->regmap, INA226_ALERT_MASK,
+ &alert);
+ if (ret < 0)
+ goto _err;
alert &= INA266_CVRF;
trace_printk("Conversion ready: %d\n", !!alert);
@@ -454,7 +483,8 @@ static int ina2xx_capture_thread(void *data)
* Poll a bit faster than the chip internal Fs, in case
* we wish to sync with the conversion ready flag.
*/
- sampling_us -= 200;
+ if (!chip->allow_async_readout)
+ sampling_us -= 200;
do {
buffer_us = ina2xx_work_buffer(indio_dev);
@@ -477,6 +507,7 @@ int ina2xx_buffer_enable(struct iio_dev *indio_dev)
1000000/sampling_us, chip->avg);
trace_printk("Expected work period: %u us\n", sampling_us);
+ trace_printk("Async readout mode: %d\n", chip->allow_async_readout);
chip->prev_ns = iio_get_time_ns();
@@ -518,7 +549,12 @@ static int ina2xx_debug_reg(struct iio_dev *indio_dev,
static IIO_CONST_ATTR_INT_TIME_AVAIL \
("0.000140 0.000204 0.000332 0.000588 0.001100 0.002116 0.004156 0.008244");
+static IIO_DEVICE_ATTR(in_allow_async_readout, S_IRUGO | S_IWUSR,
+ ina2xx_allow_async_readout_show,
+ ina2xx_allow_async_readout_store, 0);
+
static struct attribute *ina2xx_attributes[] = {
+ &iio_dev_attr_in_allow_async_readout.dev_attr.attr,
&iio_const_attr_integration_time_available.dev_attr.attr,
NULL,
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
