On Wed, 2015-11-18 at 14:02 +0100, Bastien Nocera wrote: > Hey, > Hi, > In kernel 4.4, the I2C hid layer throws errors when trying to parse the > report descriptor for the HID sensor hub: Was it working in 4.3? I gave a test with another device with i2c hid and 4.4.rc1 that is working. If it was working in 4.3 it will be easy to find the commit. Thanks, Srinivas > > i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:63 / ret_size:3 > > I've attached the i2c-hid debug output through dmesg, and the report > descriptor in this mail. Any ideas? > > Cheers > > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Initializing cgroup subsys cpuacct > [ 0.000000] Linux version 4.4.0-0.rc0.git7.3.fc24.x86_64 (hadess@coal) (gcc version 5.1.1 20150618 (Red Hat 5.1.1-4) (GCC) ) #1 SMP Thu Nov 12 17:51:35 CET 2015 > [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.4.0-0.rc0.git7.3.fc24.x86_64 root=UUID=6dadcd59-2499-4ac6-8cd2-fdd2c043b52e ro nomodeset rhgb quiet LANG=en_GB.UTF-8 i2c_hid.debug=1 > [ 0.000000] x86/fpu: Legacy x87 FPU detected. > [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. > [ 0.000000] e820: BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable > [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS > [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable > [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved > [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable > [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved > [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x00000000ba96efff] usable > [ 0.000000] BIOS-e820: [mem 0x00000000ba96f000-0x00000000bac6efff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000bac6f000-0x00000000bad6efff] ACPI data > [ 0.000000] BIOS-e820: [mem 0x00000000bad6f000-0x00000000bb3bffff] ACPI NVS > [ 0.000000] BIOS-e820: [mem 0x00000000bb3c0000-0x00000000bbaccfff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000bbacd000-0x00000000bbad0fff] usable > [ 0.000000] BIOS-e820: [mem 0x00000000bbad1000-0x00000000bbad1fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000bbad2000-0x00000000bbffffff] usable > [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved > [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] efi: EFI v2.40 by American Megatrends > [ 0.000000] efi: ESRT=0xbb7cac98 ACPI=0xbad5d000 ACPI 2.0=0xbad5d000 SMBIOS=0xbb5fbd18 > [ 0.000000] esrt: Reserving ESRT space from 0x00000000bb7cac98 to 0x00000000bb7cad20. > [ 0.000000] SMBIOS 2.8 present. > [ 0.000000] DMI: Microsoft Corporation Surface 3/Surface 3, BIOS 1.50310.318 03/10/2015 > [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved > [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable > [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000 > [ 0.000000] MTRR default type: uncachable > [ 0.000000] MTRR fixed ranges enabled: > [ 0.000000] 00000-9FFFF write-back > [ 0.000000] A0000-FFFFF write-protect > [ 0.000000] MTRR variable ranges enabled: > [ 0.000000] 0 base 000000000 mask F80000000 write-back > [ 0.000000] 1 base 080000000 mask FC0000000 write-back > [ 0.000000] 2 base 0BE000000 mask FFE000000 uncachable > [ 0.000000] 3 base 0BD000000 mask FFF000000 uncachable > [ 0.000000] 4 base 0BD000000 mask FFF000000 uncachable > [ 0.000000] 5 base 0BCC00000 mask FFFC00000 uncachable > [ 0.000000] 6 base 0BCA00000 mask FFFE00000 uncachable > [ 0.000000] 7 base 100000000 mask FC0000000 write-back > [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT > [ 0.000000] e820: update [mem 0xbca00000-0xffffffff] usable ==> reserved > [ 0.000000] e820: last_pfn = 0xbc000 max_arch_pfn = 0x400000000 > [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 > [ 0.000000] BRK [0x0204e000, 0x0204efff] PGTABLE > [ 0.000000] BRK [0x0204f000, 0x0204ffff] PGTABLE > [ 0.000000] BRK [0x02050000, 0x02050fff] PGTABLE > [ 0.000000] BRK [0x02051000, 0x02051fff] PGTABLE > [ 0.000000] BRK [0x02052000, 0x02052fff] PGTABLE > [ 0.000000] BRK [0x02053000, 0x02053fff] PGTABLE > [ 0.000000] RAMDISK: [mem 0x3ef3c000-0x3fffafff] > [ 0.000000] ACPI: Early table checksum verification disabled > [ 0.000000] ACPI: RSDP 0x00000000BAD5D000 000024 (v02 ALASKA) > [ 0.000000] ACPI: XSDT 0x00000000BAD5D0B0 0000DC (v01 ALASKA A M I 01072009 AMI 00010013) > [ 0.000000] ACPI: FACP 0x00000000BAD6A268 00010C (v05 ALASKA A M I 01072009 AMI 00010013) > [ 0.000000] ACPI: DSDT 0x00000000BAD5D218 00D04B (v02 ALASKA A M I 01072009 INTL 20120913) > [ 0.000000] ACPI: APIC 0x00000000BAD6A378 000084 (v03 ALASKA A M I 01072009 AMI 00010013) > [ 0.000000] ACPI: FPDT 0x00000000BAD6A400 000044 (v01 ALASKA A M I 01072009 AMI 00010013) > [ 0.000000] ACPI: FIDT 0x00000000BAD6A448 00009C (v01 ALASKA A M I 01072009 AMI 00010013) > [ 0.000000] ACPI: TCPA 0x00000000BAD6A4E8 000032 (v02 00000000 00000000) > [ 0.000000] ACPI: MSDM 0x00000000BAD6A520 000055 (v03 ALASKA A M I 01072009 AMI 00010013) > [ 0.000000] ACPI: MCFG 0x00000000BAD6A578 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) > [ 0.000000] ACPI: WDSA 0x00000000BAD6A5B8 00016F (v02 MSHWDS ACTABL 00000003 INTL 20120913) > [ 0.000000] ACPI: UEFI 0x00000000BAD6A728 000042 (v01 ALASKA A M I 00000000 00000000) > [ 0.000000] ACPI: HPET 0x00000000BAD6A770 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) > [ 0.000000] ACPI: SSDT 0x00000000BAD6A7A8 000763 (v01 PmRef CpuPm 00003000 INTL 20120913) > [ 0.000000] ACPI: SSDT 0x00000000BAD6AF10 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20120913) > [ 0.000000] ACPI: SSDT 0x00000000BAD6B1A0 00017A (v01 PmRef ApTst 00003000 INTL 20120913) > [ 0.000000] ACPI: SSDT 0x00000000BAD6B320 000427 (v01 Intel_ Tpm2Tabl 00001000 INTL 20061109) > [ 0.000000] ACPI: TPM2 0x00000000BAD6B748 000034 (v03 00000000 00000000) > [ 0.000000] ACPI: LPIT 0x00000000BAD6B780 000104 (v01 ALASKA A M I 00000005 MSFT 0100000D) > [ 0.000000] ACPI: OEM0 0x00000000BAD6B888 000084 (v05 INTEL BATTERY 00000005 INTL 00000000) > [ 0.000000] ACPI: BGRT 0x00000000BAD6B910 000038 (v01 ALASKA A M I 01072009 AMI 00010013) > [ 0.000000] ACPI: CSRT 0x00000000BAD6B948 00014C (v00 INTEL LANFORDC 00000005 MSFT 0100000D) > [ 0.000000] ACPI: SSDT 0x00000000BAD6BA98 001F68 (v01 DptfTb DptfTab 00001000 INTL 20120913) > [ 0.000000] ACPI: SSDT 0x00000000BAD6DA00 000104 (v01 SoCDpf SoCDptf 00001000 INTL 20120913) > [ 0.000000] ACPI: SSDT 0x00000000BAD6DB08 0005C7 (v01 CpuDpf CpuDptf 00001000 INTL 20120913) > [ 0.000000] ACPI: SSDT 0x00000000BAD6E0D0 000058 (v01 LowPM LowPwrM 00001000 INTL 20120913) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff] > [ 0.000000] NODE_DATA(0) allocated [mem 0x13fd71000-0x13fd82fff] > [ 0.000000] Zone ranges: > [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] > [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] > [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008efff] > [ 0.000000] node 0: [mem 0x0000000000090000-0x000000000009dfff] > [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] > [ 0.000000] node 0: [mem 0x0000000020200000-0x00000000ba96efff] > [ 0.000000] node 0: [mem 0x00000000bbacd000-0x00000000bbad0fff] > [ 0.000000] node 0: [mem 0x00000000bbad2000-0x00000000bbffffff] > [ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff] > [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff] > [ 0.000000] On node 0 totalpages: 1027133 > [ 0.000000] DMA zone: 64 pages used for memmap > [ 0.000000] DMA zone: 21 pages reserved > [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 11891 pages used for memmap > [ 0.000000] DMA32 zone: 760993 pages, LIFO batch:31 > [ 0.000000] Normal zone: 4096 pages used for memmap > [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 > [ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED > [ 0.000000] Reserving Intel graphics stolen memory at 0xbce00000-0xbedfffff > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) > [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 > [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs > [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] > [ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff] > [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] > [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] > [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xba96f000-0xbac6efff] > [ 0.000000] PM: Registered nosave memory: [mem 0xbac6f000-0xbad6efff] > [ 0.000000] PM: Registered nosave memory: [mem 0xbad6f000-0xbb3bffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xbb3c0000-0xbbaccfff] > [ 0.000000] PM: Registered nosave memory: [mem 0xbbad1000-0xbbad1fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xbc000000-0xbcdfffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xbce00000-0xbedfffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xbee00000-0xdfffffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfe9fffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfeafffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed05fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfed06000-0xfed06fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfed07000-0xfed07fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed09fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfed0a000-0xfed1bfff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfed1d000-0xfed7ffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfedbffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfedc0000-0xfedfffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] > [ 0.000000] e820: [mem 0xbee00000-0xdfffffff] available for PCI devices > [ 0.000000] Booting paravirtualized kernel on bare hardware > [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns > [ 0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 34 pages/cpu @ffff88013f800000 s98712 r8192 d32360 u524288 > [ 0.000000] pcpu-alloc: s98712 r8192 d32360 u524288 alloc=1*2097152 > [ 0.000000] pcpu-alloc: [0] 0 1 2 3 > [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1011061 > [ 0.000000] Policy zone: Normal > [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-0.rc0.git7.3.fc24.x86_64 root=UUID=6dadcd59-2499-4ac6-8cd2-fdd2c043b52e ro nomodeset rhgb quiet LANG=en_GB.UTF-8 i2c_hid.debug=1 > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] Memory: 3909748K/4108532K available (7766K kernel code, 1293K rwdata, 3424K rodata, 1528K init, 1544K bss, 198784K reserved, 0K cma-reserved) > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] Build-time adjustment of leaf fanout to 64. > [ 0.000000] RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4. > [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 > [ 0.000000] NR_IRQS:65792 nr_irqs:1024 0 > [ 0.000000] Offload RCU callbacks from all CPUs > [ 0.000000] Offload RCU callbacks from CPUs: 0-3. > [ 0.000000] Console: colour dummy device 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] tsc: Using PIT calibration value > [ 0.000000] tsc: Detected 1599.842 MHz processor > [ 0.000062] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.68 BogoMIPS (lpj=1599842) > [ 0.000069] pid_max: default: 32768 minimum: 301 > [ 0.000088] ACPI: Core revision 20150930 > [ 0.032405] ACPI: 9 ACPI AML tables successfully acquired and loaded > [ 0.034044] Security Framework initialized > [ 0.034052] Yama: becoming mindful. > [ 0.034064] SELinux: Initializing. > [ 0.034090] SELinux: Starting in permissive mode > [ 0.034888] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) > [ 0.037265] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > [ 0.038309] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) > [ 0.038336] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) > [ 0.038877] Initializing cgroup subsys io > [ 0.038889] Initializing cgroup subsys memory > [ 0.038908] Initializing cgroup subsys devices > [ 0.038917] Initializing cgroup subsys freezer > [ 0.038924] Initializing cgroup subsys net_cls > [ 0.038931] Initializing cgroup subsys perf_event > [ 0.038939] Initializing cgroup subsys net_prio > [ 0.038947] Initializing cgroup subsys hugetlb > [ 0.038961] Initializing cgroup subsys pids > [ 0.039016] CPU: Physical Processor ID: 0 > [ 0.039021] CPU: Processor Core ID: 0 > [ 0.039030] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' > [ 0.039034] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) > [ 0.044447] mce: CPU supports 6 MCE banks > [ 0.044465] CPU0: Thermal monitoring enabled (TM1) > [ 0.044475] process: using mwait in idle threads > [ 0.044482] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 > [ 0.044485] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0 > [ 0.044991] Freeing SMP alternatives memory: 28K (ffffffff81ec3000 - ffffffff81eca000) > [ 0.053986] ftrace: allocating 29314 entries in 115 pages > [ 0.075556] TSC deadline timer enabled > [ 0.075566] smpboot: CPU0: Intel(R) Atom(TM) x7-Z8700 CPU @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x3) > [ 0.075621] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver. > [ 0.075646] ... version: 3 > [ 0.075650] ... bit width: 40 > [ 0.075652] ... generic registers: 2 > [ 0.075655] ... value mask: 000000ffffffffff > [ 0.075658] ... max period: 000000ffffffffff > [ 0.075660] ... fixed-purpose events: 3 > [ 0.075663] ... event mask: 0000000700000003 > [ 0.077852] x86: Booting SMP configuration: > [ 0.077859] .... node #0, CPUs: #1 > [ 0.096652] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. > [ 0.097062] #2 #3 > [ 0.134526] x86: Booted up 1 node, 4 CPUs > [ 0.134533] smpboot: Total of 4 processors activated (12798.73 BogoMIPS) > [ 0.135920] devtmpfs: initialized > [ 0.144664] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes) > [ 0.144671] PM: Registering ACPI NVS region [mem 0xbad6f000-0xbb3bffff] (6623232 bytes) > [ 0.145173] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns > [ 0.145446] atomic64_test: passed for x86-64 platform with CX8 and with SSE > [ 0.145454] pinctrl core: initialized pinctrl subsystem > [ 0.145579] RTC time: 11:58:14, date: 11/18/15 > [ 0.145996] NET: Registered protocol family 16 > [ 0.148387] cpuidle: using governor menu > [ 0.148642] ACPI: bus type PCI registered > [ 0.148648] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > [ 0.148876] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) > [ 0.148884] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 > [ 0.148892] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!) > [ 0.148918] PCI: Using configuration type 1 for base access > [ 0.155555] ACPI: Added _OSI(Module Device) > [ 0.155561] ACPI: Added _OSI(Processor Device) > [ 0.155564] ACPI: Added _OSI(3.0 _SCP Extensions) > [ 0.155567] ACPI: Added _OSI(Processor Aggregator Device) > [ 0.160611] ACPI : EC: Look up EC in DSDT > [ 0.173213] ACPI Error: Needed [Integer/String/Buffer], found [Device] ffff88013f4a9e10 (20150930/exresop-424) > [ 0.173230] ACPI Exception: AE_AML_OPERAND_TYPE, Could not execute arguments for [KEYS] (Region) (20150930/nsinit-355) > [ 0.177104] \_SB_ _OSC UUID 0811B06E-4A27-44F9-8D60-3CBBC22E7B48 > [ 0.177111] 6E B0 11 08 27 4A F9 44 8D 60 3C BB C2 2E 7B 48 > [ 0.177897] ACPI: Dynamic OEM Table Load: > [ 0.177919] ACPI: SSDT 0xFFFF880139F02000 00066D (v01 PmRef Cpu0Ist 00003000 INTL 20120913) > [ 0.179479] ACPI: Dynamic OEM Table Load: > [ 0.179492] ACPI: SSDT 0xFFFF880139F31000 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20120913) > [ 0.181526] ACPI: Dynamic OEM Table Load: > [ 0.181538] ACPI: SSDT 0xFFFF880139F2DE00 00015F (v01 PmRef ApIst 00003000 INTL 20120913) > [ 0.183049] ACPI: Dynamic OEM Table Load: > [ 0.183060] ACPI: SSDT 0xFFFF880139F6F3C0 00008D (v01 PmRef ApCst 00003000 INTL 20120913) > [ 0.186385] ACPI: Interpreter enabled > [ 0.186406] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580) > [ 0.186421] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580) > [ 0.186430] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150930/hwxface-580) > [ 0.186442] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20150930/hwxface-580) > [ 0.186461] ACPI: (supports S0 S5) > [ 0.186469] ACPI: Using IOAPIC for interrupt routing > [ 0.186559] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug > [ 0.189570] ACPI: Power Resource [ID3C] (on) > [ 0.191416] ACPI: Power Resource [PRWF] (on) > [ 0.193179] ACPI: Power Resource [USBC] (on) > [ 0.194361] ACPI: Power Resource [WWPR] (off) > [ 0.201365] ACPI Error: No handler for Region [GPOR] (ffff88013f4b35e8) [GeneralPurposeIo] (20150930/evregion-163) > [ 0.201377] ACPI Error: Region GeneralPurposeIo (ID=8) has no handler (20150930/exfldio-297) > [ 0.201387] ACPI Error: Method parse/execution failed [\_SB.PCI0.SPI1.NTRG._STA] (Node ffff88013f4b75a0), AE_NOT_EXIST (20150930/psparse-542) > [ 0.201443] ACPI Error: No handler for Region [GPOR] (ffff88013f4b35e8) [GeneralPurposeIo] (20150930/evregion-163) > [ 0.201451] ACPI Error: Region GeneralPurposeIo (ID=8) has no handler (20150930/exfldio-297) > [ 0.201458] ACPI Error: Method parse/execution failed [\_SB.PCI0.SPI1.NTRG._STA] (Node ffff88013f4b75a0), AE_NOT_EXIST (20150930/psparse-542) > [ 0.201472] ACPI Error: Method execution failed [\_SB.PCI0.SPI1.NTRG._STA] (Node ffff88013f4b75a0), AE_NOT_EXIST (20150930/uteval-103) > [ 0.203593] ACPI: Power Resource [CLK3] (on) > [ 0.210425] ACPI: Power Resource [CLK0] (on) > [ 0.210537] ACPI: Power Resource [CLK1] (on) > [ 0.210779] ACPI: Power Resource [P28X] (off) > [ 0.210883] ACPI: Power Resource [P18X] (off) > [ 0.212235] ACPI Error: No handler for Region [SNOP] (ffff88013f4b6048) [GenericSerialBus] (20150930/evregion-163) > [ 0.212246] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20150930/exfldio-297) > [ 0.212256] ACPI Error: Method parse/execution failed [\_SB.PCI0.I2C4.SAM._SUB] (Node ffff88013f4b5e88), AE_NOT_EXIST (20150930/psparse-542) > [ 0.212271] ACPI Error: Method execution failed [\_SB.PCI0.I2C4.SAM._SUB] (Node ffff88013f4b5e88), AE_NOT_EXIST (20150930/uteval-103) > [ 0.213328] ACPI: Power Resource [TCPR] (off) > [ 0.228087] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > [ 0.228106] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] > [ 0.228114] \_SB_.PCI0 _OSC UUID 33DB4D5B-1FF7-401C-9657-7441C03DD766 > [ 0.228119] 5B 4D DB 33 F7 1F 1C 40 96 57 74 41 C0 3D D7 66 > [ 0.228308] \_SB_.PCI0 _OSC UUID 33DB4D5B-1FF7-401C-9657-7441C03DD766 > [ 0.228312] 5B 4D DB 33 F7 1F 1C 40 96 57 74 41 C0 3D D7 66 > [ 0.228499] \_SB_.PCI0 _OSC UUID 33DB4D5B-1FF7-401C-9657-7441C03DD766 > [ 0.228503] 5B 4D DB 33 F7 1F 1C 40 96 57 74 41 C0 3D D7 66 > [ 0.228690] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] > [ 0.228729] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge > [ 0.229989] PCI host bridge to bus 0000:00 > [ 0.229998] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] > [ 0.230005] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] > [ 0.230010] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] > [ 0.230014] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] > [ 0.230021] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] > [ 0.230025] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] > [ 0.230030] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] > [ 0.230035] pci_bus 0000:00: root bus resource [mem 0x20000000-0x201fffff window] > [ 0.230040] pci_bus 0000:00: root bus resource [mem 0xbce00001-0xbee00000 window] > [ 0.230044] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window] > [ 0.230050] pci_bus 0000:00: root bus resource [bus 00-ff] > [ 0.230069] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000 > [ 0.230606] pci 0000:00:02.0: [8086:22b0] type 00 class 0x030000 > [ 0.230648] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit] > [ 0.230665] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] > [ 0.230677] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] > [ 0.230996] pci 0000:00:03.0: [8086:22b8] type 00 class 0x048000 > [ 0.231025] pci 0000:00:03.0: reg 0x10: [mem 0xd1000000-0xd13fffff] > [ 0.231366] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000 > [ 0.231402] pci 0000:00:0b.0: reg 0x10: [mem 0xd1a37000-0xd1a37fff 64bit] > [ 0.231773] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330 > [ 0.231820] pci 0000:00:14.0: reg 0x10: [mem 0xd1a00000-0xd1a0ffff 64bit] > [ 0.231912] pci 0000:00:14.0: PME# supported from D3hot D3cold > [ 0.232271] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000 > [ 0.232312] pci 0000:00:1a.0: reg 0x10: [mem 0xd1700000-0xd17fffff] > [ 0.232327] pci 0000:00:1a.0: reg 0x14: [mem 0xd1600000-0xd16fffff] > [ 0.232418] pci 0000:00:1a.0: PME# supported from D0 D3hot > [ 0.232857] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400 > [ 0.234442] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 0.235027] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100 > [ 0.236288] pci 0000:01:00.0: [11ab:2b38] type 00 class 0x020000 > [ 0.236363] pci 0000:01:00.0: reg 0x10: [mem 0xd1900000-0xd19fffff 64bit pref] > [ 0.236398] pci 0000:01:00.0: reg 0x18: [mem 0xd1800000-0xd18fffff 64bit pref] > [ 0.236649] pci 0000:01:00.0: supports D1 D2 > [ 0.236654] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold > [ 0.236795] pci 0000:01:00.0: System wakeup disabled by ACPI > [ 0.239368] pci 0000:00:1c.0: PCI bridge to [bus 01] > [ 0.239381] pci 0000:00:1c.0: bridge window [mem 0xd1800000-0xd19fffff] > [ 0.243454] ACPI Error: No handler for Region [GPOR] (ffff88013f4b35e8) [GeneralPurposeIo] (20150930/evregion-163) > [ 0.243464] ACPI Error: Region GeneralPurposeIo (ID=8) has no handler (20150930/exfldio-297) > [ 0.243476] ACPI Error: Method parse/execution failed [\_SB.PCI0.SPI1.NTRG._STA] (Node ffff88013f4b75a0), AE_NOT_EXIST (20150930/psparse-542) > [ 0.248117] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. > [ 0.248310] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. > [ 0.248482] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. > [ 0.248652] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. > [ 0.248815] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. > [ 0.248984] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. > [ 0.249149] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. > [ 0.249354] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. > [ 0.256828] vgaarb: setting as boot device: PCI:0000:00:02.0 > [ 0.256837] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none > [ 0.256844] vgaarb: loaded > [ 0.256850] vgaarb: bridge control possible 0000:00:02.0 > [ 0.257148] SCSI subsystem initialized > [ 0.257277] libata version 3.00 loaded. > [ 0.257381] ACPI: bus type USB registered > [ 0.257440] usbcore: registered new interface driver usbfs > [ 0.257463] usbcore: registered new interface driver hub > [ 0.257520] usbcore: registered new device driver usb > [ 0.258049] PCI: Using ACPI for IRQ routing > [ 0.260789] PCI: pci_cache_line_size set to 64 bytes > [ 0.260974] Expanded resource reserved due to conflict with PCI Bus 0000:00 > [ 0.260982] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff] > [ 0.260987] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] > [ 0.260991] e820: reserve RAM buffer [mem 0xba96f000-0xbbffffff] > [ 0.260994] e820: reserve RAM buffer [mem 0xbbad1000-0xbbffffff] > [ 0.261336] NetLabel: Initializing > [ 0.261342] NetLabel: domain hash size = 128 > [ 0.261344] NetLabel: protocols = UNLABELED CIPSOv4 > [ 0.261385] NetLabel: unlabeled traffic allowed by default > [ 0.261591] clocksource: Switched to clocksource refined-jiffies > [ 0.286665] pnp: PnP ACPI init > [ 0.287070] system 00:00: [io 0x0680-0x069f] has been reserved > [ 0.287077] system 00:00: [io 0x0400-0x047f] has been reserved > [ 0.287082] system 00:00: [io 0x0500-0x05fe] has been reserved > [ 0.287094] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.287342] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active) > [ 0.291285] system 00:02: [mem 0xd1a35000-0xd1a35fff] has been reserved > [ 0.291293] system 00:02: [mem 0xd1a33000-0xd1a33fff] has been reserved > [ 0.291299] system 00:02: [mem 0xd1a22000-0xd1a22fff] has been reserved > [ 0.291304] system 00:02: [mem 0xd1a20000-0xd1a20fff] has been reserved > [ 0.291310] system 00:02: [mem 0xd1a1e000-0xd1a1efff] has been reserved > [ 0.291315] system 00:02: [mem 0xd1a1c000-0xd1a1cfff] has been reserved > [ 0.291320] system 00:02: [mem 0xd1a1a000-0xd1a1afff] has been reserved > [ 0.291325] system 00:02: [mem 0xd1a18000-0xd1a18fff] has been reserved > [ 0.291330] system 00:02: [mem 0xd1a31000-0xd1a31fff] has been reserved > [ 0.291335] system 00:02: [mem 0xd1a2f000-0xd1a2ffff] has been reserved > [ 0.291347] system 00:02: [mem 0xd1a2d000-0xd1a2dfff] has been reserved > [ 0.291353] system 00:02: [mem 0xd1a2b000-0xd1a2bfff] has been reserved > [ 0.291358] system 00:02: [mem 0xd1a29000-0xd1a29fff] has been reserved > [ 0.291363] system 00:02: [mem 0xd1a27000-0xd1a27fff] has been reserved > [ 0.291368] system 00:02: [mem 0xd1a25000-0xd1a25fff] has been reserved > [ 0.291373] system 00:02: [mem 0xd1a23000-0xd1a23fff] has been reserved > [ 0.291385] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.291508] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved > [ 0.291514] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved > [ 0.291522] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved > [ 0.291527] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved > [ 0.291532] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved > [ 0.291537] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved > [ 0.291542] system 00:03: [mem 0xfed80000-0xfedbffff] could not be reserved > [ 0.291548] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved > [ 0.291553] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved > [ 0.291561] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.291987] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) > [ 0.292851] pnp: PnP ACPI: found 5 devices > [ 0.299404] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 > [ 0.299415] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 > [ 0.299430] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 > [ 0.299436] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 > [ 0.299441] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 > [ 0.299446] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 > [ 0.299473] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd1b00000-0xd1cfffff 64bit pref] > [ 0.299481] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] > [ 0.299492] pci 0000:00:1c.0: PCI bridge to [bus 01] > [ 0.299518] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] > [ 0.299588] pci 0000:00:1c.0: bridge window [mem 0xd1800000-0xd19fffff] > [ 0.299636] pci 0000:00:1c.0: bridge window [mem 0xd1b00000-0xd1cfffff 64bit pref] > [ 0.299727] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] > [ 0.299733] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] > [ 0.299737] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] > [ 0.299742] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] > [ 0.299746] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] > [ 0.299751] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] > [ 0.299755] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] > [ 0.299760] pci_bus 0000:00: resource 11 [mem 0x20000000-0x201fffff window] > [ 0.299765] pci_bus 0000:00: resource 12 [mem 0xbce00001-0xbee00000 window] > [ 0.299769] pci_bus 0000:00: resource 13 [mem 0xc0000000-0xdfffffff window] > [ 0.299774] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] > [ 0.299778] pci_bus 0000:01: resource 1 [mem 0xd1800000-0xd19fffff] > [ 0.299783] pci_bus 0000:01: resource 2 [mem 0xd1b00000-0xd1cfffff 64bit pref] > [ 0.299909] NET: Registered protocol family 2 > [ 0.300385] TCP established hash table entries: 32768 (order: 6, 262144 bytes) > [ 0.300584] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) > [ 0.300778] TCP: Hash tables configured (established 32768 bind 32768) > [ 0.300889] UDP hash table entries: 2048 (order: 4, 65536 bytes) > [ 0.300952] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) > [ 0.301159] NET: Registered protocol family 1 > [ 0.301203] pci 0000:00:02.0: Video device with shadowed ROM > [ 0.301437] PCI: CLS 64 bytes, default 64 > [ 0.301612] Unpacking initramfs... > [ 0.944479] Freeing initrd memory: 17148K (ffff88003ef3c000 - ffff88003fffb000) > [ 0.944503] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > [ 0.944511] software IO TLB [mem 0xb6000000-0xba000000] (64MB) mapped at [ffff8800b6000000-ffff8800b9ffffff] > [ 0.946859] futex hash table entries: 1024 (order: 4, 65536 bytes) > [ 0.946947] audit: initializing netlink subsys (disabled) > [ 0.946995] audit: type=2000 audit(1447847894.827:1): initialized > [ 0.947735] Initialise system trusted keyring > [ 0.947961] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 0.952037] zbud: loaded > [ 0.952573] VFS: Disk quotas dquot_6.6.0 > [ 0.952695] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 0.953873] Key type big_key registered > [ 0.953884] SELinux: Registering netfilter hooks > [ 0.968077] NET: Registered protocol family 38 > [ 0.968107] Key type asymmetric registered > [ 0.968117] Asymmetric key parser 'x509' registered > [ 0.968297] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) > [ 0.968404] io scheduler noop registered > [ 0.968414] io scheduler deadline registered > [ 0.968524] io scheduler cfq registered (default) > [ 0.970925] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt > [ 0.970934] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt > [ 0.970983] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded > [ 0.971002] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 0.971097] pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ > [ 0.971259] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded > [ 0.971277] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > [ 0.971374] efifb: probing for efifb > [ 0.971422] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90000800000, using 1876k, total 1875k > [ 0.971426] efifb: mode is 800x600x32, linelength=3200, pages=1 > [ 0.971428] efifb: scrolling: redraw > [ 0.971432] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 > [ 0.971761] Console: switching to colour frame buffer device 100x37 > [ 0.975486] fb0: EFI VGA frame buffer device > [ 0.975534] intel_idle: MWAIT substates: 0x33000020 > [ 0.975538] intel_idle: v0.4 model 0x4C > [ 0.975541] intel_idle: lapic_timer_reliable_states 0xffffffff > [ 0.976263] ACPI: AC Adapter [ADP1] (off-line) > [ 0.976468] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 > [ 0.976476] ACPI: Power Button [PWRB] > [ 0.976577] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 > [ 0.976584] ACPI: Sleep Button [SLPB] > [ 0.976700] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 > [ 0.976748] ACPI: Lid Switch [LID] > [ 0.981348] GHES: HEST is not enabled! > [ 0.981617] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled > [ 1.002137] 00:01: ttyS0 at I/O 0x3f8 (irq = 224, base_baud = 115200) is a 16550A > [ 1.006736] 8086228A:00: ttyS4 at MMIO 0xd1a21000 (irq = 4, base_baud = 2764800) is a 16550A > [ 1.007147] 8086228A:01: ttyS5 at MMIO 0xd1a1f000 (irq = 5, base_baud = 2764800) is a 16550A > [ 1.007950] hpet: number irqs doesn't agree with number of timers > [ 1.008075] Non-volatile memory driver v1.3 > [ 1.008172] Linux agpgart interface v0.103 > [ 1.009584] libphy: Fixed MDIO Bus: probed > [ 1.009745] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 1.009760] ehci-pci: EHCI PCI platform driver > [ 1.009799] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 1.009814] ohci-pci: OHCI PCI platform driver > [ 1.009841] uhci_hcd: USB Universal Host Controller Interface driver > [ 1.010223] xhci_hcd 0000:00:14.0: xHCI Host Controller > [ 1.010374] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 > [ 1.010631] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 > [ 1.010649] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported > [ 1.011036] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 1.011045] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 1.011050] usb usb1: Product: xHCI Host Controller > [ 1.011054] usb usb1: Manufacturer: Linux 4.4.0-0.rc0.git7.3.fc24.x86_64 xhci-hcd > [ 1.011058] usb usb1: SerialNumber: 0000:00:14.0 > [ 1.011459] hub 1-0:1.0: USB hub found > [ 1.011493] hub 1-0:1.0: 7 ports detected > [ 1.012775] xhci_hcd 0000:00:14.0: xHCI Host Controller > [ 1.012917] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 > [ 1.013027] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 > [ 1.013033] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 1.013037] usb usb2: Product: xHCI Host Controller > [ 1.013041] usb usb2: Manufacturer: Linux 4.4.0-0.rc0.git7.3.fc24.x86_64 xhci-hcd > [ 1.013045] usb usb2: SerialNumber: 0000:00:14.0 > [ 1.013359] hub 2-0:1.0: USB hub found > [ 1.013404] hub 2-0:1.0: 6 ports detected > [ 1.013760] usb: failed to peer usb2-port2 and usb1-port1 by location (usb2-port2:none) (usb1-port1:usb2-port1) > [ 1.013765] usb usb2-port2: failed to peer to usb1-port1 (-16) > [ 1.013768] usb: port power management may be unreliable > [ 1.013910] usb: failed to peer usb2-port3 and usb1-port1 by location (usb2-port3:none) (usb1-port1:usb2-port1) > [ 1.013915] usb usb2-port3: failed to peer to usb1-port1 (-16) > [ 1.014064] usb: failed to peer usb2-port4 and usb1-port1 by location (usb2-port4:none) (usb1-port1:usb2-port1) > [ 1.014069] usb usb2-port4: failed to peer to usb1-port1 (-16) > [ 1.014205] usb: failed to peer usb2-port5 and usb1-port1 by location (usb2-port5:none) (usb1-port1:usb2-port1) > [ 1.014211] usb usb2-port5: failed to peer to usb1-port1 (-16) > [ 1.014350] usb: failed to peer usb2-port6 and usb1-port1 by location (usb2-port6:none) (usb1-port1:usb2-port1) > [ 1.014355] usb usb2-port6: failed to peer to usb1-port1 (-16) > [ 1.014752] usbcore: registered new interface driver usbserial > [ 1.014778] usbcore: registered new interface driver usbserial_generic > [ 1.014800] usbserial: USB Serial support registered for generic > [ 1.014885] i8042: PNP: No PS/2 controller found. Probing ports directly. > [ 2.095995] i8042: No controller found > [ 2.096269] mousedev: PS/2 mouse device common for all mice > [ 2.096941] ACPI Warning: Could not enable fixed event - RealTimeClock (4) (20150930/evxface-654) > [ 2.097289] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 > [ 2.097360] rtc_cmos 00:04: alarms up to one day, 242 bytes nvram > [ 2.097543] device-mapper: uevent: version 1.0.3 > [ 2.097771] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@xxxxxxxxxx > [ 2.097949] Intel P-state driver initializing. > [ 2.099586] hidraw: raw HID events driver (C) Jiri Kosina > [ 2.099976] usbcore: registered new interface driver usbhid > [ 2.099990] usbhid: USB HID core driver > [ 2.100680] drop_monitor: Initializing network drop monitor service > [ 2.101200] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 2.101413] Initializing XFRM netlink socket > [ 2.102692] NET: Registered protocol family 10 > [ 2.104220] mip6: Mobile IPv6 > [ 2.104257] NET: Registered protocol family 17 > [ 2.105908] SSE version of gcm_enc/dec engaged. > [ 2.125039] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x170f8fa7afd, max_idle_ns: 440795249780 ns > [ 2.140046] clocksource: Switched to clocksource tsc > [ 2.170094] registered taskstats version 1 > [ 2.170134] Loading compiled-in X.509 certificates > [ 2.172765] Loaded X.509 cert 'Fedora kernel signing key: 7f87fbbd4c585d8712955db375636155dac694cb' > [ 2.172843] zswap: loaded using pool lzo/zbud > [ 2.174130] Magic number: 7:990:984 > [ 2.174471] rtc_cmos 00:04: setting system clock to 2015-11-18 11:58:16 UTC (1447847896) > [ 2.175119] PM: Hibernation image not present or could not be loaded. > [ 2.179004] Freeing unused kernel memory: 1528K (ffffffff81d45000 - ffffffff81ec3000) > [ 2.179012] Write protecting the kernel read-only data: 12288k > [ 2.180231] Freeing unused kernel memory: 412K (ffff880001799000 - ffff880001800000) > [ 2.184021] Freeing unused kernel memory: 672K (ffff880001b58000 - ffff880001c00000) > [ 2.184065] ------------[ cut here ]------------ > [ 2.184076] WARNING: CPU: 0 PID: 1 at arch/x86/mm/dump_pagetables.c:225 note_page+0x5e1/0x780() > [ 2.184081] x86/mm: Found insecure W+X mapping at address ffff880001c00000/0xffff880001c00000 > [ 2.184084] Modules linked in: > [ 2.184091] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-0.rc0.git7.3.fc24.x86_64 #1 > [ 2.184094] Hardware name: Microsoft Corporation Surface 3/Surface 3, BIOS 1.50310.318 03/10/2015 > [ 2.184097] 0000000000000000 000000006ef97ae6 ffff880139c27d48 ffffffff813aea8f > [ 2.184102] ffff880139c27d90 ffff880139c27d80 ffffffff810a1a22 ffff880139c27e90 > [ 2.184107] 0000000000000163 0000000000000004 0000000000000000 0000000000000000 > [ 2.184111] Call Trace: > [ 2.184121] [<ffffffff813aea8f>] dump_stack+0x44/0x55 > [ 2.184127] [<ffffffff810a1a22>] warn_slowpath_common+0x82/0xc0 > [ 2.184131] [<ffffffff810a1abc>] warn_slowpath_fmt+0x5c/0x80 > [ 2.184135] [<ffffffff8106f6b1>] note_page+0x5e1/0x780 > [ 2.184140] [<ffffffff8106fb5c>] ptdump_walk_pgd_level_core+0x30c/0x440 > [ 2.184145] [<ffffffff8106fd37>] ptdump_walk_pgd_level_checkwx+0x17/0x20 > [ 2.184149] [<ffffffff81065a64>] mark_rodata_ro+0xf4/0x100 > [ 2.184154] [<ffffffff81785360>] ? rest_init+0x80/0x80 > [ 2.184158] [<ffffffff8178537d>] kernel_init+0x1d/0xe0 > [ 2.184163] [<ffffffff8179134f>] ret_from_fork+0x3f/0x70 > [ 2.184167] [<ffffffff81785360>] ? rest_init+0x80/0x80 > [ 2.184170] ---[ end trace d16986b6dd8293fa ]--- > [ 2.200571] x86/mm: Checked W+X mappings: FAILED, 56407 W+X pages found. > [ 2.222095] random: systemd urandom read with 11 bits of entropy available > [ 2.225608] systemd[1]: systemd 222 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) > [ 2.225972] systemd[1]: Detected architecture x86-64. > [ 2.225979] systemd[1]: Running in initial RAM disk. > [ 2.226027] systemd[1]: Set hostname to <surface>. > [ 2.327387] systemd[1]: Created slice -.slice. > [ 2.327414] systemd[1]: Starting -.slice. > [ 2.327519] systemd[1]: Listening on Journal Socket. > [ 2.327538] systemd[1]: Starting Journal Socket. > [ 2.327608] systemd[1]: Listening on udev Control Socket. > [ 2.327626] systemd[1]: Starting udev Control Socket. > [ 2.327801] systemd[1]: Listening on Journal Audit Socket. > [ 2.327819] systemd[1]: Starting Journal Audit Socket. > [ 2.327966] systemd[1]: Created slice System Slice. > [ 2.327985] systemd[1]: Starting System Slice. > [ 2.328059] systemd[1]: Started dracut ask for additional cmdline parameters. > [ 2.337638] systemd[1]: Starting Setup Virtual Console... > [ 2.338093] systemd[1]: Started Load Kernel Modules. > [ 2.339664] systemd[1]: Starting Create list of required static device nodes for the current kernel... > [ 2.339714] systemd[1]: Reached target Swap. > [ 2.339747] systemd[1]: Starting Swap. > [ 2.339865] systemd[1]: Listening on Journal Socket (/dev/log). > [ 2.339884] systemd[1]: Starting Journal Socket (/dev/log). > [ 2.341105] systemd[1]: Starting Journal Service... > [ 2.344032] systemd[1]: Starting dracut cmdline hook... > [ 2.344154] systemd[1]: Listening on udev Kernel Socket. > [ 2.344182] systemd[1]: Starting udev Kernel Socket. > [ 2.344216] systemd[1]: Reached target Sockets. > [ 2.344235] systemd[1]: Starting Sockets. > [ 2.344271] systemd[1]: Reached target Slices. > [ 2.344287] systemd[1]: Starting Slices. > [ 2.344333] systemd[1]: Reached target Timers. > [ 2.344349] systemd[1]: Starting Timers. > [ 2.345681] systemd[1]: Starting Apply Kernel Variables... > [ 2.345729] systemd[1]: Reached target Local File Systems. > [ 2.345763] systemd[1]: Starting Local File Systems. > [ 2.346977] systemd[1]: Started Create list of required static device nodes for the current kernel. > [ 2.349886] audit: type=1130 audit(1447847896.674:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 2.350622] systemd[1]: Started Apply Kernel Variables. > [ 2.350705] audit: type=1130 audit(1447847896.675:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 2.358450] systemd[1]: Starting Create Static Device Nodes in /dev... > [ 2.363937] usb 1-2: new high-speed USB device number 2 using xhci_hcd > [ 2.367479] systemd[1]: Started Create Static Device Nodes in /dev. > [ 2.367595] audit: type=1130 audit(1447847896.692:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 2.385859] systemd[1]: Started Journal Service. > [ 2.385980] audit: type=1130 audit(1447847896.710:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 2.495943] audit: type=1130 audit(1447847896.820:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 2.528152] usb 1-2: New USB device found, idVendor=0424, idProduct=2137 > [ 2.528159] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ 2.528162] usb 1-2: Product: USB2137 > [ 2.528165] usb 1-2: Manufacturer: SMSC > [ 2.528640] hub 1-2:1.0: USB hub found > [ 2.528677] hub 1-2:1.0: 7 ports detected > [ 2.547519] audit: type=1130 audit(1447847896.872:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 2.554259] audit: type=1130 audit(1447847896.878:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 2.573608] audit: type=1130 audit(1447847896.898:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 2.608487] audit: type=1130 audit(1447847896.933:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 2.683326] usb 1-3: new full-speed USB device number 3 using xhci_hcd > [ 2.777825] sdhci: Secure Digital Host Controller Interface driver > [ 2.777832] sdhci: Copyright(c) Pierre Ossman > [ 2.782160] sdhci-acpi 80860F14:00: No vmmc regulator found > [ 2.782168] sdhci-acpi 80860F14:00: No vqmmc regulator found > [ 2.786635] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA > [ 2.789488] sdhci-acpi 80860F14:01: No vmmc regulator found > [ 2.789495] sdhci-acpi 80860F14:01: No vqmmc regulator found > [ 2.792274] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED > [ 2.795613] mmc1: SDHCI controller on ACPI [80860F14:01] using ADMA > [ 2.855630] usb 1-3: New USB device found, idVendor=045e, idProduct=07de > [ 2.855638] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ 2.855641] usb 1-3: Product: Surface Type Cover > [ 2.855644] usb 1-3: Manufacturer: Microsoft > [ 2.869558] [drm] Initialized drm 1.1.0 20060810 > [ 2.896040] mmc0: MAN_BKOPS_EN bit is not set > [ 2.904984] mmc0: new HS200 MMC card at address 0001 > [ 2.905235] input: Microsoft Surface Type Cover as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:045E:07DE.0001/input/input3 > [ 2.913347] mmcblk0: mmc0:0001 MDGAGC 116 GiB > [ 2.914542] mmcblk0boot0: mmc0:0001 MDGAGC partition 1 4.00 MiB > [ 2.914804] mmcblk0boot1: mmc0:0001 MDGAGC partition 2 4.00 MiB > [ 2.914958] mmcblk0rpmb: mmc0:0001 MDGAGC partition 3 4.00 MiB > [ 2.917425] mmcblk0: p1 p2 p3 p4 p5 p6 p7 > [ 2.926327] usb 1-2.4: new full-speed USB device number 4 using xhci_hcd > [ 2.957394] microsoft 0003:045E:07DE.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [Microsoft Surface Type Cover] on usb-0000:00:14.0-3/input0 > [ 3.013134] usb 1-2.4: New USB device found, idVendor=046d, idProduct=c52b > [ 3.013142] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ 3.013145] usb 1-2.4: Product: USB Receiver > [ 3.013148] usb 1-2.4: Manufacturer: Logitech > [ 3.091443] usb 1-2.6: new full-speed USB device number 5 using xhci_hcd > [ 3.179814] usb 1-2.6: New USB device found, idVendor=0596, idProduct=0524 > [ 3.179828] usb 1-2.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ 3.179842] usb 1-2.6: Product: 3M MicroTouch USB controller > [ 3.179847] usb 1-2.6: Manufacturer: 3M > [ 3.259174] usb 1-2.7: new high-speed USB device number 6 using xhci_hcd > [ 3.443133] usb 1-2.7: New USB device found, idVendor=0bda, idProduct=570a > [ 3.443149] usb 1-2.7: New USB device strings: Mfr=3, Product=1, SerialNumber=2 > [ 3.443158] usb 1-2.7: Product: DELL S2340T Webcam > [ 3.443167] usb 1-2.7: Manufacturer: 56.18006.48133B10J > [ 3.443173] usb 1-2.7: SerialNumber: 201209030001 > [ 3.636115] usb 1-2.1: new high-speed USB device number 7 using xhci_hcd > [ 3.724811] usb 1-2.1: New USB device found, idVendor=0424, idProduct=2134 > [ 3.724824] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ 3.724837] usb 1-2.1: Product: USB2134 > [ 3.724842] usb 1-2.1: Manufacturer: SMSC > [ 3.726292] hub 1-2.1:1.0: USB hub found > [ 3.726405] hub 1-2.1:1.0: 4 ports detected > [ 3.832992] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) > [ 4.292021] systemd-journald[168]: Received SIGTERM from PID 1 (systemd). > [ 4.438886] SELinux: 32768 avtab hash slots, 103234 rules. > [ 4.471071] SELinux: 32768 avtab hash slots, 103234 rules. > [ 4.549894] SELinux: 8 users, 14 roles, 4897 types, 305 bools, 1 sens, 1024 cats > [ 4.549902] SELinux: 92 classes, 103234 rules > [ 4.556286] SELinux: Completing initialization. > [ 4.556313] SELinux: Setting up existing superblocks. > [ 4.583686] systemd[1]: Successfully loaded SELinux policy in 188.208ms. > [ 4.607101] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time. > [ 4.699847] systemd[1]: Relabelled /dev and /run in 82.889ms. > [ 5.051189] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null) > [ 5.114132] RPC: Registered named UNIX socket transport module. > [ 5.114138] RPC: Registered udp transport module. > [ 5.114140] RPC: Registered tcp transport module. > [ 5.114142] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 5.172967] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). > [ 5.193260] systemd-journald[502]: Received request to flush runtime journal from PID 1 > [ 5.723997] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels > [ 5.724552] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels > [ 5.728092] i2c_hid i2c-MSHW0102:00: Fetching the HID descriptor > [ 5.728101] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=01 00 > [ 5.731335] i2c_hid i2c-MSHW0102:00: HID Descriptor: 1e 00 00 01 8e 06 02 00 03 00 3f 00 04 00 3f 00 05 00 06 00 5e 04 bd 07 03 00 00 00 00 00 > [ 5.733249] i2c_hid i2c-MSHW0102:00: entering i2c_hid_parse > [ 5.733256] i2c_hid i2c-MSHW0102:00: i2c_hid_hwreset > [ 5.733260] i2c_hid i2c-MSHW0102:00: i2c_hid_set_power > [ 5.733264] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 00 08 > [ 5.734331] i2c_hid i2c-MSHW0102:00: input: 34 00 23 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > [ 5.738335] i2c_hid i2c-MSHW0102:00: input: 34 00 11 22 ab 4e 91 01 00 00 03 dc 04 53 65 6c 66 74 65 73 74 20 30 78 30 30 30 30 30 30 30 34 00 b7 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > [ 5.741327] i2c_hid i2c-MSHW0102:00: input: 34 00 11 1e 11 2d 07 03 02 00 00 00 00 00 00 00 57 a4 00 00 ab 4e 91 01 00 00 03 dc 04 53 65 6c 66 74 65 73 74 20 30 78 30 30 30 30 30 30 30 34 00 b7 00 00 > [ 5.742345] i2c_hid i2c-MSHW0102:00: resetting... > [ 5.742360] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 00 01 > [ 5.745330] i2c_hid i2c-MSHW0102:00: input: 34 00 11 22 ab 4f 91 01 00 00 03 dc 04 53 65 6c 66 74 65 73 74 20 30 78 30 30 30 30 30 30 30 34 00 23 00 00 80 00 00 00 04 f2 ff 1f 00 00 00 00 74 f9 ff 1f > [ 5.749330] i2c_hid i2c-MSHW0102:00: input: 34 00 11 1e 11 2d 07 03 18 00 00 00 0c 20 01 00 64 3e 00 20 fd 01 00 00 f1 ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 41 5b 00 00 4f c5 00 00 > [ 5.750257] wmi: Mapper loaded > [ 5.753324] i2c_hid i2c-MSHW0102:00: input: 34 00 11 22 ab 50 91 01 00 00 03 dc 04 53 65 6c 66 74 65 73 74 20 30 78 30 30 30 30 30 30 30 34 00 4c 00 00 00 01 00 00 04 f2 ff 1f 00 00 00 00 74 f9 ff 1f > [ 5.756320] i2c_hid i2c-MSHW0102:00: input: 34 00 11 1e 11 2d 07 03 02 00 00 00 00 00 00 00 57 a4 00 00 ab 50 91 01 00 00 03 dc 04 53 65 6c 66 74 65 73 74 20 30 78 30 30 30 30 30 30 30 34 00 4c 00 00 > [ 5.759322] i2c_hid i2c-MSHW0102:00: input: 34 00 11 22 ab 51 91 01 00 00 03 dc 04 53 65 6c 66 74 65 73 74 20 30 78 30 30 30 30 30 30 30 34 00 d8 ad de 34 90 04 40 01 00 00 00 a0 f1 ff 1f fb cf 00 00 > [ 5.763327] i2c_hid i2c-MSHW0102:00: input: 34 00 11 1e 11 2d 07 03 bf 89 00 00 cc f9 ff 1f ed 89 00 00 24 3f 00 20 f1 ff ff ff 00 00 00 00 1e 00 00 00 3d a5 00 00 ff ff 00 00 cc f9 ff 1f 13 00 00 00 > [ 5.764944] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: waiting... > [ 5.768348] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: finished. > [ 5.768358] i2c_hid i2c-MSHW0102:00: asking HID report descriptor > [ 5.768363] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=02 00 > [ 5.818333] i2c_hid i2c-MSHW0102:00: Report Descriptor: 05 20 09 01 a1 01 85 01 05 20 09 73 a1 00 0a 09 03 15 00 25 02 75 08 95 01 a1 02 0a 30 08 0a 31 08 0a 32 08 b1 00 c0 0a 0e 03 15 00 27 ff ff ff ff 75 20 95 01 55 00 b1 02 0a 52 14 15 00 26 ff > [ 5.819766] i2c_hid i2c-MSHW0102:00: i2c_hid_set_power > [ 5.819774] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 01 08 > [ 5.824458] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > [ 5.845074] random: nonblocking pool is initialized > [ 5.880807] i2c i2c-6: Failed to register i2c client MSHW0011:00 at 0x6e (-16) > [ 5.880816] i2c i2c-6: failed to add I2C device MSHW0011:00 from ACPI > [ 5.885569] proc_thermal 0000:00:0b.0: enabling device (0000 -> 0002) > [ 5.890627] intel_sst_acpi 808622A8:00: No matching machine driver found > [ 5.897986] media: Linux media interface: v0.10 > [ 5.900205] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2.4/input2 > [ 5.953621] input: 3M 3M MicroTouch USB controller as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.6/1-2.6:1.0/0003:0596:0524.0005/input/input4 > [ 5.957627] hid-multitouch 0003:0596:0524.0005: input,hiddev0,hidraw2: USB HID v1.10 Pointer [3M 3M MicroTouch USB controller] on usb-0000:00:14.0-2.6/input0 > [ 5.963400] rt5640 i2c-10EC5640:00: Device with ID register 0x6308 is not rt5640/39 > [ 5.963731] mwifiex_pcie 0000:01:00.0: enabling device (0000 -> 0002) > [ 5.963973] mwifiex: rx work enabled, cpus 4 > [ 5.967068] Linux video capture interface: v2.00 > [ 6.156475] audit_printk_skb: 162 callbacks suppressed > [ 6.156482] audit: type=1130 audit(1447844300.481:65): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-c43308f2\x2dad28\x2d4c0e\x2d93d5\x2d17cb6a415c7a comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 6.178250] audit: type=1130 audit(1447844300.502:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-5C9B\x2dF942 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 6.181591] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null) > [ 6.189085] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null) > [ 6.302207] usbcore: registered new interface driver snd-usb-audio > [ 6.302496] uvcvideo: Found UVC 1.00 device DELL S2340T Webcam (0bda:570a) > [ 6.312186] input: DELL S2340T Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.7/1-2.7:1.0/input/input5 > [ 6.312595] usbcore: registered new interface driver uvcvideo > [ 6.312599] USB Video Class driver (1.1.1) > [ 6.368462] i2c_hid i2c-MSHW0102:00: i2c_hid_set_power > [ 6.368470] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 00 08 > [ 6.369920] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report > [ 6.369926] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 31 02 06 00 > [ 6.370828] i2c_hid i2c-MSHW0102:00: report (len=14): 0e 00 01 01 10 00 00 00 64 00 02 06 02 10 > [ 6.370836] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report > [ 6.370840] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 32 02 06 00 > [ 6.371553] i2c_hid i2c-MSHW0102:00: report (len=14): 0e 00 02 01 10 00 00 00 64 00 02 06 02 10 > [ 6.371560] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report > [ 6.371564] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 33 02 06 00 > [ 6.372818] i2c_hid i2c-MSHW0102:00: report (len=30): 1e 00 03 01 64 00 00 00 e8 03 02 06 02 64 28 00 0a 00 64 00 0b 00 64 00 40 1f 0f 27 41 1f > [ 6.372825] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report > [ 6.372828] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 34 02 06 00 > [ 6.373572] i2c_hid i2c-MSHW0102:00: report (len=14): 0e 00 04 01 10 00 00 00 e8 03 02 06 02 10 > [ 6.373577] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report > [ 6.373580] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 20 06 00 > [ 6.377269] i2c_hid i2c-MSHW0102:00: report (len=63): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > [ 6.377275] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:63 / ret_size:3 > [ 6.377279] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report > [ 6.377282] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 21 06 00 > [ 6.380952] i2c_hid i2c-MSHW0102:00: report (len=63): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > [ 6.380956] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:63 / ret_size:3 > [ 6.380960] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report > [ 6.380962] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 22 06 00 > [ 6.381876] i2c_hid i2c-MSHW0102:00: report (len=19): 13 00 22 11 2d 07 03 00 00 00 00 00 00 00 00 00 00 00 00 > [ 6.381885] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report > [ 6.381889] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 23 06 00 > [ 6.385306] i2c_hid i2c-MSHW0102:00: report (len=19): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > [ 6.385311] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:19 / ret_size:3 > [ 6.385314] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report > [ 6.385317] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 24 06 00 > [ 6.387675] i2c_hid i2c-MSHW0102:00: report (len=19): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > [ 6.387679] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:19 / ret_size:3 > [ 6.387683] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report > [ 6.387686] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 25 06 00 > [ 6.389936] i2c_hid i2c-MSHW0102:00: report (len=19): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > [ 6.389941] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:19 / ret_size:3 > [ 6.389944] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report > [ 6.389947] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 26 06 00 > [ 6.392303] i2c_hid i2c-MSHW0102:00: report (len=19): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > [ 6.392307] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:19 / ret_size:3 > [ 6.392311] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report > [ 6.392314] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 27 06 00 > [ 6.394569] i2c_hid i2c-MSHW0102:00: report (len=19): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > [ 6.394574] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:19 / ret_size:3 > [ 6.394577] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report > [ 6.394580] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 28 06 00 > [ 6.403249] i2c_hid i2c-MSHW0102:00: report (len=19): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > [ 6.403254] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:19 / ret_size:3 > [ 6.403257] i2c_hid i2c-MSHW0102:00: i2c_hid_get_report > [ 6.403260] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 3f 02 29 06 00 > [ 6.406306] i2c_hid i2c-MSHW0102:00: report (len=19): 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > [ 6.406311] i2c_hid i2c-MSHW0102:00: error in i2c_hid_init_report size:19 / ret_size:3 > [ 6.406737] i2c_hid i2c-MSHW0102:00: i2c_hid_set_power > [ 6.406741] i2c_hid i2c-MSHW0102:00: __i2c_hid_command: cmd=05 00 01 08 > [ 6.415968] intel_rapl: Found RAPL domain package > [ 6.415975] intel_rapl: Found RAPL domain core > [ 6.457446] iTCO_vendor_support: vendor-support=0 > [ 6.460919] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 > [ 6.461059] iTCO_wdt: Found a Braswell SoC TCO device (Version=3, TCOBASE=0x0460) > [ 6.468492] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > [ 6.501451] cfg80211: World regulatory domain updated: > [ 6.501460] cfg80211: DFS Master region: unset > [ 6.501462] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) > [ 6.501467] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) > [ 6.501470] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) > [ 6.501472] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) > [ 6.501475] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) > [ 6.501479] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) > [ 6.501481] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) > [ 6.501484] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) > [ 6.501486] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) > [ 6.501782] input: Logitech K750 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0004/0003:046D:4002.0007/input/input6 > [ 6.508473] logitech-hidpp-device 0003:046D:4002.0007: input,hidraw3: USB HID v1.11 Keyboard [Logitech K750] on usb-0000:00:14.0-2.4:1 > [ 6.513876] logitech-hidpp-device 0003:046D:4101.0008: hidraw4: USB HID v1.11 Keyboard [Logitech T650] on usb-0000:00:14.0-2.4:2 > [ 6.632786] usb 1-2: USB disconnect, device number 2 > [ 6.632794] usb 1-2.1: USB disconnect, device number 7 > [ 6.633427] usb 1-2.4: USB disconnect, device number 4 > [ 6.973656] mwifiex_pcie 0000:01:00.0: info: FW download over, size 759128 bytes > [ 7.019691] usb 1-2.6: USB disconnect, device number 5 > [ 7.029537] audit: type=1130 audit(1447844301.354:67): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 7.044750] usb 1-2.7: USB disconnect, device number 6 > [ 7.098269] audit: type=1130 audit(1447844301.422:68): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 7.098323] audit: type=1131 audit(1447844301.422:69): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 7.130347] audit: type=1130 audit(1447844301.454:70): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 7.131370] audit: type=1130 audit(1447844301.456:71): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 7.138844] audit: type=1130 audit(1447844301.463:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 7.138885] audit: type=1131 audit(1447844301.463:73): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 7.165370] audit: type=1130 audit(1447844301.490:74): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=fedora-import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' > [ 7.714927] usb 1-4: new high-speed USB device number 8 using xhci_hcd > [ 7.879600] usb 1-4: New USB device found, idVendor=1286, idProduct=204c > [ 7.879607] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > [ 7.879611] usb 1-4: Product: Bluetooth and Wireless LAN Composite Device > [ 7.879613] usb 1-4: Manufacturer: Marvell > [ 7.879616] usb 1-4: SerialNumber: 0000000000000000 > [ 7.986455] mwifiex_pcie 0000:01:00.0: WLAN FW is active > [ 8.003453] Bluetooth: Core ver 2.21 > [ 8.004139] NET: Registered protocol family 31 > [ 8.004144] Bluetooth: HCI device and connection manager initialized > [ 8.004153] Bluetooth: HCI socket layer initialized > [ 8.004159] Bluetooth: L2CAP socket layer initialized > [ 8.004180] Bluetooth: SCO socket layer initialized > [ 8.029932] usbcore: registered new interface driver btusb > [ 8.086243] mwifiex_pcie 0000:01:00.0 mlan0: set_features() failed (-1); wanted 0x0000000000004000, left 0x0000000000004800 > [ 8.094175] mwifiex_pcie 0000:01:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (15.68.4.p112) > [ 8.094183] mwifiex_pcie 0000:01:00.0: driver_version = mwifiex 1.0 (15.68.4.p112) > [ 8.104765] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > [ 8.104771] Bluetooth: BNEP filters: protocol multicast > [ 8.104781] Bluetooth: BNEP socket layer initialized > [ 8.115399] mwifiex_pcie 0000:01:00.0 wlp1s0: renamed from mlan0 > [ 8.166481] cfg80211: Regulatory domain changed to country: FR > [ 8.166490] cfg80211: DFS Master region: ETSI > [ 8.166493] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) > [ 8.166497] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) > [ 8.166500] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) > [ 8.166503] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) > [ 8.166506] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s) > [ 8.166509] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) > [ 8.373062] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > [ 8.454501] ip6_tables: (C) 2000-2006 Netfilter Core Team > [ 8.602893] Ebtables v2.0 registered > [ 8.645175] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. > [ 9.553171] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready > [ 9.555997] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready > [ 9.729716] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready > [ 11.112797] mwifiex_pcie 0000:01:00.0: info: trying to associate to 'idoru' bssid f4:ca:e5:c2:74:6c > [ 11.151645] mwifiex_pcie 0000:01:00.0: info: associated to bssid f4:ca:e5:c2:74:6c successfully > [ 11.151703] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready > [ 12.448526] fuse init (API version 7.23) > [ 12.615691] tun: Universal TUN/TAP device driver, 1.6 > [ 12.615696] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> > [ 12.617144] virbr0-nic: set_features() failed (-1); wanted 0x00000080000048c1, left 0x00000080001b48c9 > [ 12.664950] virbr0-nic: set_features() failed (-1); wanted 0x00000080000048c1, left 0x00000080001b48c9 > [ 12.664974] device virbr0-nic entered promiscuous mode > [ 12.665019] virbr0: set_features() failed (-1); wanted 0x000000801fdb78c9, left 0x000000801fff78e9 > [ 13.001815] virbr0: set_features() failed (-1); wanted 0x000000801fdb78c9, left 0x000000801fff78e9 > [ 13.001868] virbr0: port 1(virbr0-nic) entered listening state > [ 13.001884] virbr0: port 1(virbr0-nic) entered listening state > [ 13.011555] mwifiex_pcie 0000:01:00.0 wlp1s0: set_features() failed (-1); wanted 0x0000000000006000, left 0x0000000000006800 > [ 13.011619] virbr0: set_features() failed (-1); wanted 0x000000801fdb78c9, left 0x000000801fff78e9 > [ 13.011671] virbr0-nic: set_features() failed (-1); wanted 0x00000080000048c1, left 0x00000080001b48c9 > [ 13.011699] virbr0: set_features() failed (-1); wanted 0x000000801fdb78c9, left 0x000000801fff78e9 > [ 13.011726] virbr0-nic: set_features() failed (-1); wanted 0x00000080000048c1, left 0x00000080001b48c9 > [ 13.011747] virbr0: set_features() failed (-1); wanted 0x000000801fdb78c9, left 0x000000801fff78e9 > [ 13.107427] virbr0: port 1(virbr0-nic) entered disabled state > [ 13.282532] Bluetooth: RFCOMM TTY layer initialized > [ 13.282938] Bluetooth: RFCOMM socket layer initialized > [ 13.284771] Bluetooth: RFCOMM ver 1.11 > [ 15.569185] mwifiex_pcie 0000:01:00.0: Rx of mgmt packet failed > [ 51.727275] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. > [ 145.848207] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd > [ 145.861772] usb 2-2: New USB device found, idVendor=1b8f, idProduct=0305 > [ 145.861784] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > [ 145.861791] usb 2-2: Product: EXPRESS DUO > [ 145.861797] usb 2-2: Manufacturer: STT > [ 145.861802] usb 2-2: SerialNumber: 0312125800000506 > [ 145.927756] usb-storage 2-2:1.0: USB Mass Storage device detected > [ 145.928129] scsi host0: usb-storage 2-2:1.0 > [ 145.928874] usbcore: registered new interface driver usb-storage > [ 145.934957] usbcore: registered new interface driver uas > [ 146.930454] scsi 0:0:0:0: Direct-Access STT EXPRESS DUO 1.00 PQ: 0 ANSI: 5 > [ 146.932927] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 146.933068] sd 0:0:0:0: [sda] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB) > [ 146.935184] sd 0:0:0:0: [sda] Write Protect is off > [ 146.935195] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 > [ 146.935459] sd 0:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA > [ 146.939092] sda: > [ 146.940200] sd 0:0:0:0: [sda] Attached SCSI removable disk > [ 147.191570] FAT-fs (sda): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. > [ 175.356774] mwifiex_pcie 0000:01:00.0: Rx of mgmt packet failed -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
