Re: [PATCH v3 4/6] iio: bmg160: Remove remaining uses of i2c_client

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/08/15 17:08, Srinivas Pandruvada wrote:
> Can you not merge this with patch 2/6?
Meh, I already took that one so will take this one separately.

You are correct of course that it might makes sense to do this
all together.  Ah well ;)


> On Wed, 2015-08-12 at 16:50 +0200, Markus Pargmann wrote:
>> Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
Applied.
>> ---
>>  drivers/iio/gyro/bmg160.c | 55 +++++++++++++++++++++++------------------------
>>  1 file changed, 27 insertions(+), 28 deletions(-)
>>
>> diff --git a/drivers/iio/gyro/bmg160.c b/drivers/iio/gyro/bmg160.c
>> index 6eab91ba8977..39df64fb4262 100644
>> --- a/drivers/iio/gyro/bmg160.c
>> +++ b/drivers/iio/gyro/bmg160.c
>> @@ -110,6 +110,7 @@ struct bmg160_data {
>>  	int slope_thres;
>>  	bool dready_trigger_on;
>>  	bool motion_trigger_on;
>> +	int irq;
>>  };
>>  
>>  enum bmg160_axis {
>> @@ -961,18 +962,14 @@ static const struct iio_buffer_setup_ops bmg160_buffer_setup_ops = {
>>  	.postdisable = bmg160_buffer_postdisable,
>>  };
>>  
>> -static int bmg160_gpio_probe(struct i2c_client *client,
>> -			     struct bmg160_data *data)
>> +static int bmg160_gpio_probe(struct bmg160_data *data)
>>  
>>  {
>>  	struct device *dev;
>>  	struct gpio_desc *gpio;
>>  	int ret;
>>  
>> -	if (!client)
>> -		return -EINVAL;
>> -
>> -	dev = &client->dev;
>> +	dev = data->dev;
>>  
>>  	/* data ready gpio interrupt pin */
>>  	gpio = devm_gpiod_get_index(dev, BMG160_GPIO_NAME, 0, GPIOD_IN);
>> @@ -981,11 +978,11 @@ static int bmg160_gpio_probe(struct i2c_client *client,
>>  		return PTR_ERR(gpio);
>>  	}
>>  
>> -	ret = gpiod_to_irq(gpio);
>> +	data->irq = gpiod_to_irq(gpio);
>>  
>>  	dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
>>  
>> -	return ret;
>> +	return 0;
>>  }
>>  
>>  static const char *bmg160_match_acpi_device(struct device *dev)
>> @@ -1007,6 +1004,7 @@ static int bmg160_probe(struct i2c_client *client,
>>  	int ret;
>>  	const char *name = NULL;
>>  	struct regmap *regmap;
>> +	struct device *dev = &client->dev;
>>  
>>  	regmap = devm_regmap_init_i2c(client, &bmg160_regmap_i2c_conf);
>>  	if (IS_ERR(regmap)) {
>> @@ -1020,8 +1018,9 @@ static int bmg160_probe(struct i2c_client *client,
>>  		return -ENOMEM;
>>  
>>  	data = iio_priv(indio_dev);
>> -	dev_set_drvdata(&client->dev, indio_dev);
>> -	data->dev = &client->dev;
>> +	dev_set_drvdata(dev, indio_dev);
>> +	data->dev = dev;
>> +	data->irq = client->irq;
>>  
>>  	ret = bmg160_chip_init(data);
>>  	if (ret < 0)
>> @@ -1032,22 +1031,22 @@ static int bmg160_probe(struct i2c_client *client,
>>  	if (id)
>>  		name = id->name;
>>  
>> -	if (ACPI_HANDLE(&client->dev))
>> -		name = bmg160_match_acpi_device(&client->dev);
>> +	if (ACPI_HANDLE(dev))
>> +		name = bmg160_match_acpi_device(dev);
>>  
>> -	indio_dev->dev.parent = &client->dev;
>> +	indio_dev->dev.parent = dev;
>>  	indio_dev->channels = bmg160_channels;
>>  	indio_dev->num_channels = ARRAY_SIZE(bmg160_channels);
>>  	indio_dev->name = name;
>>  	indio_dev->modes = INDIO_DIRECT_MODE;
>>  	indio_dev->info = &bmg160_info;
>>  
>> -	if (client->irq <= 0)
>> -		client->irq = bmg160_gpio_probe(client, data);
>> +	if (data->irq <= 0)
>> +		bmg160_gpio_probe(data);
>>  
>> -	if (client->irq > 0) {
>> -		ret = devm_request_threaded_irq(&client->dev,
>> -						client->irq,
>> +	if (data->irq > 0) {
>> +		ret = devm_request_threaded_irq(dev,
>> +						data->irq,
>>  						bmg160_data_rdy_trig_poll,
>>  						bmg160_event_handler,
>>  						IRQF_TRIGGER_RISING,
>> @@ -1056,28 +1055,28 @@ static int bmg160_probe(struct i2c_client *client,
>>  		if (ret)
>>  			return ret;
>>  
>> -		data->dready_trig = devm_iio_trigger_alloc(&client->dev,
>> +		data->dready_trig = devm_iio_trigger_alloc(dev,
>>  							   "%s-dev%d",
>>  							   indio_dev->name,
>>  							   indio_dev->id);
>>  		if (!data->dready_trig)
>>  			return -ENOMEM;
>>  
>> -		data->motion_trig = devm_iio_trigger_alloc(&client->dev,
>> +		data->motion_trig = devm_iio_trigger_alloc(dev,
>>  							  "%s-any-motion-dev%d",
>>  							  indio_dev->name,
>>  							  indio_dev->id);
>>  		if (!data->motion_trig)
>>  			return -ENOMEM;
>>  
>> -		data->dready_trig->dev.parent = &client->dev;
>> +		data->dready_trig->dev.parent = dev;
>>  		data->dready_trig->ops = &bmg160_trigger_ops;
>>  		iio_trigger_set_drvdata(data->dready_trig, indio_dev);
>>  		ret = iio_trigger_register(data->dready_trig);
>>  		if (ret)
>>  			return ret;
>>  
>> -		data->motion_trig->dev.parent = &client->dev;
>> +		data->motion_trig->dev.parent = dev;
>>  		data->motion_trig->ops = &bmg160_trigger_ops;
>>  		iio_trigger_set_drvdata(data->motion_trig, indio_dev);
>>  		ret = iio_trigger_register(data->motion_trig);
>> @@ -1092,25 +1091,25 @@ static int bmg160_probe(struct i2c_client *client,
>>  					 bmg160_trigger_handler,
>>  					 &bmg160_buffer_setup_ops);
>>  	if (ret < 0) {
>> -		dev_err(&client->dev,
>> +		dev_err(dev,
>>  			"iio triggered buffer setup failed\n");
>>  		goto err_trigger_unregister;
>>  	}
>>  
>>  	ret = iio_device_register(indio_dev);
>>  	if (ret < 0) {
>> -		dev_err(&client->dev, "unable to register iio device\n");
>> +		dev_err(dev, "unable to register iio device\n");
>>  		goto err_buffer_cleanup;
>>  	}
>>  
>> -	ret = pm_runtime_set_active(&client->dev);
>> +	ret = pm_runtime_set_active(dev);
>>  	if (ret)
>>  		goto err_iio_unregister;
>>  
>> -	pm_runtime_enable(&client->dev);
>> -	pm_runtime_set_autosuspend_delay(&client->dev,
>> +	pm_runtime_enable(dev);
>> +	pm_runtime_set_autosuspend_delay(dev,
>>  					 BMG160_AUTO_SUSPEND_DELAY_MS);
>> -	pm_runtime_use_autosuspend(&client->dev);
>> +	pm_runtime_use_autosuspend(dev);
>>  
>>  	return 0;
>>  
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux