Re: [PATCH v3 5/6] iio: bmg160: Separate i2c and core driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/08/15 17:16, Srinivas Pandruvada wrote:
> On Wed, 2015-08-12 at 16:50 +0200, Markus Pargmann wrote:
>> This patch separates the core driver using regmap and the i2c driver
>> which creates the i2c regmap. Also in the Kconfig file BMG160 and
>> BMG160_I2C are separate now.
>>
>> Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
As I mentioned in the review of you other recent set, I'm not so keen on
the way you have the Kconfig.
>> ---
>>  drivers/iio/gyro/Kconfig                     | 18 +++++--
>>  drivers/iio/gyro/Makefile                    |  2 +-
>>  drivers/iio/gyro/bmg160.h                    | 10 ++++
>>  drivers/iio/gyro/{bmg160.c => bmg160_core.c} | 77 +++++-----------------------
>>  drivers/iio/gyro/bmg160_i2c.c                | 71 +++++++++++++++++++++++++	
>>  5 files changed, 109 insertions(+), 69 deletions(-)
>>  create mode 100644 drivers/iio/gyro/bmg160.h
>>  rename drivers/iio/gyro/{bmg160.c => bmg160_core.c} (94%)
>>  create mode 100644 drivers/iio/gyro/bmg160_i2c.c
>>
>> diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
>> index cf82d74139a2..13f8e0051615 100644
>> --- a/drivers/iio/gyro/Kconfig
>> +++ b/drivers/iio/gyro/Kconfig
>> @@ -51,17 +51,27 @@ config ADXRS450
>>  	  will be called adxrs450.
>>  
>>  config BMG160
>> -	tristate "BOSCH BMG160 Gyro Sensor"
>> -	depends on I2C
>> +	bool "BOSCH BMG160 Gyro Sensor"
This prevents building the core as a module? 
>>  	select IIO_BUFFER
>>  	select IIO_TRIGGERED_BUFFER
>> -	select REGMAP_I2C
>>  	help
>>  	  Say yes here to build support for Bosch BMG160 Tri-axis Gyro Sensor
>>  	  driver. This driver also supports BMI055 gyroscope.
I prefer the logic the way the ST accelerometer driver has it.  A core
module that you get to pick in the menu, then building the i2c / spi
parts dependent on their dependencies being met.  Cuts down on the
complexity of presented configuration.

Jonathan
>>  
>> +if BMG160
>> +
>> +config BMG160_I2C
>> +	tristate "Driver for connection via I2C"
>> +	depends on I2C
>> +	select REGMAP_I2C
>> +	help
>> +	  Say yes here to build support for Bosch BMG160 Tri-axis Gyro Sensor
>> +	  driver connected via I2C. This driver also supports BMI055 gyroscope.
>> +
>>  	  This driver can also be built as a module.  If so, the module
>> -	  will be called bmg160.
>> +	  will be called bmg160_i2c.
>> +
>> +endif
>>  
>>  config HID_SENSOR_GYRO_3D
>>  	depends on HID_SENSOR_HUB
>> diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile
>> index f46341b39139..73b41e43a974 100644
>> --- a/drivers/iio/gyro/Makefile
>> +++ b/drivers/iio/gyro/Makefile
>> @@ -8,7 +8,7 @@ obj-$(CONFIG_ADIS16130) += adis16130.o
>>  obj-$(CONFIG_ADIS16136) += adis16136.o
>>  obj-$(CONFIG_ADIS16260) += adis16260.o
>>  obj-$(CONFIG_ADXRS450) += adxrs450.o
>> -obj-$(CONFIG_BMG160) += bmg160.o
>> +obj-$(CONFIG_BMG160_I2C) += bmg160_core.o bmg160_i2c.o
>>  
>>  obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.o
>>  
>> diff --git a/drivers/iio/gyro/bmg160.h b/drivers/iio/gyro/bmg160.h
>> new file mode 100644
>> index 000000000000..72db723c8fb6
>> --- /dev/null
>> +++ b/drivers/iio/gyro/bmg160.h
>> @@ -0,0 +1,10 @@
>> +#ifndef BMG160_H_
>> +#define BMG160_H_
>> +
>> +extern const struct dev_pm_ops bmg160_pm_ops;
>> +
>> +int bmg160_core_probe(struct device *dev, struct regmap *regmap, int irq,
>> +		      const char *name);
>> +void bmg160_core_remove(struct device *dev);
>> +
>> +#endif  /* BMG160_H_ */
>> diff --git a/drivers/iio/gyro/bmg160.c b/drivers/iio/gyro/bmg160_core.c
>> similarity index 94%
>> rename from drivers/iio/gyro/bmg160.c
>> rename to drivers/iio/gyro/bmg160_core.c
>> index 39df64fb4262..d64e3a87e0a1 100644
>> --- a/drivers/iio/gyro/bmg160.c
>> +++ b/drivers/iio/gyro/bmg160_core.c
>> @@ -13,7 +13,6 @@
>>   */
>>  
>>  #include <linux/module.h>
>> -#include <linux/i2c.h>
>>  #include <linux/interrupt.h>
>>  #include <linux/delay.h>
>>  #include <linux/slab.h>
>> @@ -30,7 +29,6 @@
>>  #include <linux/iio/triggered_buffer.h>
>>  #include <linux/regmap.h>
>>  
>> -#define BMG160_DRV_NAME		"bmg160"
>>  #define BMG160_IRQ_NAME		"bmg160_event"
>>  #define BMG160_GPIO_NAME		"gpio_int"
>>  
>> @@ -137,12 +135,6 @@ static const struct {
>>  			   { 133, BMG160_RANGE_250DPS},
>>  			   { 66, BMG160_RANGE_125DPS} };
>>  
>> -struct regmap_config bmg160_regmap_i2c_conf = {
>> -	.reg_bits = 8,
>> -	.val_bits = 8,
>> -	.max_register = 0x3f
>> -};
>> -
>>  static int bmg160_set_mode(struct bmg160_data *data, u8 mode)
>>  {
>>  	int ret;
>> @@ -996,31 +988,22 @@ static const char *bmg160_match_acpi_device(struct device *dev)
>>  	return dev_name(dev);
>>  }
>>  
>> -static int bmg160_probe(struct i2c_client *client,
>> -			const struct i2c_device_id *id)
>> +int bmg160_core_probe(struct device *dev, struct regmap *regmap, int irq,
>> +		      const char *name)
>>  {
>>  	struct bmg160_data *data;
>>  	struct iio_dev *indio_dev;
>>  	int ret;
>> -	const char *name = NULL;
>> -	struct regmap *regmap;
>> -	struct device *dev = &client->dev;
>> -
>> -	regmap = devm_regmap_init_i2c(client, &bmg160_regmap_i2c_conf);
>> -	if (IS_ERR(regmap)) {
>> -		dev_err(&client->dev, "Failed to register i2c regmap %d\n",
>> -			(int)PTR_ERR(regmap));
>> -		return PTR_ERR(regmap);
>> -	}
>>  
>> -	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
>> +	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
>>  	if (!indio_dev)
>>  		return -ENOMEM;
>>  
>>  	data = iio_priv(indio_dev);
>>  	dev_set_drvdata(dev, indio_dev);
>>  	data->dev = dev;
>> -	data->irq = client->irq;
>> +	data->irq = irq;
>> +	data->regmap = regmap;
>>  
>>  	ret = bmg160_chip_init(data);
>>  	if (ret < 0)
>> @@ -1028,9 +1011,6 @@ static int bmg160_probe(struct i2c_client *client,
>>  
>>  	mutex_init(&data->mutex);
>>  
>> -	if (id)
>> -		name = id->name;
>> -
>>  	if (ACPI_HANDLE(dev))
>>  		name = bmg160_match_acpi_device(dev);
>>  
>> @@ -1125,15 +1105,16 @@ err_trigger_unregister:
>>  
>>  	return ret;
>>  }
>> +EXPORT_SYMBOL_GPL(bmg160_core_probe);
>>  
>> -static int bmg160_remove(struct i2c_client *client)
>> +void bmg160_core_remove(struct device *dev)
>>  {
>> -	struct iio_dev *indio_dev = i2c_get_clientdata(client);
>> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
>>  	struct bmg160_data *data = iio_priv(indio_dev);
>>  
>> -	pm_runtime_disable(&client->dev);
>> -	pm_runtime_set_suspended(&client->dev);
>> -	pm_runtime_put_noidle(&client->dev);
>> +	pm_runtime_disable(dev);
>> +	pm_runtime_set_suspended(dev);
>> +	pm_runtime_put_noidle(dev);
>>  
>>  	iio_device_unregister(indio_dev);
>>  	iio_triggered_buffer_cleanup(indio_dev);
>> @@ -1146,9 +1127,8 @@ static int bmg160_remove(struct i2c_client *client)
>>  	mutex_lock(&data->mutex);
>>  	bmg160_set_mode(data, BMG160_MODE_DEEP_SUSPEND);
>>  	mutex_unlock(&data->mutex);
>> -
>> -	return 0;
>>  }
>> +EXPORT_SYMBOL_GPL(bmg160_core_remove);
>>  
>>  #ifdef CONFIG_PM_SLEEP
>>  static int bmg160_suspend(struct device *dev)
>> @@ -1210,40 +1190,9 @@ static int bmg160_runtime_resume(struct device *dev)
>>  }
>>  #endif
>>  
>> -static const struct dev_pm_ops bmg160_pm_ops = {
>> +const struct dev_pm_ops bmg160_pm_ops = {
>>  	SET_SYSTEM_SLEEP_PM_OPS(bmg160_suspend, bmg160_resume)
>>  	SET_RUNTIME_PM_OPS(bmg160_runtime_suspend,
>>  			   bmg160_runtime_resume, NULL)
>>  };
>>  
>> -static const struct acpi_device_id bmg160_acpi_match[] = {
>> -	{"BMG0160", 0},
>> -	{"BMI055B", 0},
>> -	{},
>> -};
>> -
>> -MODULE_DEVICE_TABLE(acpi, bmg160_acpi_match);
>> -
>> -static const struct i2c_device_id bmg160_id[] = {
>> -	{"bmg160", 0},
>> -	{"bmi055_gyro", 0},
>> -	{}
>> -};
>> -
>> -MODULE_DEVICE_TABLE(i2c, bmg160_id);
>> -
>> -static struct i2c_driver bmg160_driver = {
>> -	.driver = {
>> -		.name	= BMG160_DRV_NAME,
>> -		.acpi_match_table = ACPI_PTR(bmg160_acpi_match),
>> -		.pm	= &bmg160_pm_ops,
>> -	},
>> -	.probe		= bmg160_probe,
>> -	.remove		= bmg160_remove,
>> -	.id_table	= bmg160_id,
>> -};
>> -module_i2c_driver(bmg160_driver);
>> -
>> -MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>");
>> -MODULE_LICENSE("GPL v2");
>> -MODULE_DESCRIPTION("BMG160 Gyro driver");
>> diff --git a/drivers/iio/gyro/bmg160_i2c.c b/drivers/iio/gyro/bmg160_i2c.c
>> new file mode 100644
>> index 000000000000..90126a5a7663
>> --- /dev/null
>> +++ b/drivers/iio/gyro/bmg160_i2c.c
>> @@ -0,0 +1,71 @@
>> +#include <linux/i2c.h>
>> +#include <linux/regmap.h>
>> +#include <linux/iio/iio.h>
>> +#include <linux/module.h>
>> +#include <linux/acpi.h>
>> +
>> +#include "bmg160.h"
>> +
>> +static const struct regmap_config bmg160_regmap_i2c_conf = {
>> +	.reg_bits = 8,
>> +	.val_bits = 8,
>> +	.max_register = 0x3f
>> +};
>> +
>> +static int bmg160_i2c_probe(struct i2c_client *client,
>> +			    const struct i2c_device_id *id)
>> +{
>> +	struct regmap *regmap;
>> +	const char *name = NULL;
>> +
>> +	regmap = devm_regmap_init_i2c(client, &bmg160_regmap_i2c_conf);
>> +	if (IS_ERR(regmap)) {
>> +		dev_err(&client->dev, "Failed to register i2c regmap %d\n",
>> +			(int)PTR_ERR(regmap));
>> +		return PTR_ERR(regmap);
>> +	}
>> +
>> +	if (id)
>> +		name = id->name;
>> +
>> +	return bmg160_core_probe(&client->dev, regmap, client->irq, name);
>> +}
>> +
>> +static int bmg160_i2c_remove(struct i2c_client *client)
>> +{
>> +	bmg160_core_remove(&client->dev);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct acpi_device_id bmg160_acpi_match[] = {
>> +	{"BMG0160", 0},
>> +	{"BMI055B", 0},
>> +	{},
>> +};
>> +
>> +MODULE_DEVICE_TABLE(acpi, bmg160_acpi_match);
>> +
>> +static const struct i2c_device_id bmg160_i2c_id[] = {
>> +	{"bmg160", 0},
>> +	{"bmi055_gyro", 0},
>> +	{}
>> +};
>> +
>> +MODULE_DEVICE_TABLE(i2c, bmg160_i2c_id);
>> +
>> +static struct i2c_driver bmg160_i2c_driver = {
>> +	.driver = {
>> +		.name	= "bmg160_i2c",
>> +		.acpi_match_table = ACPI_PTR(bmg160_acpi_match),
>> +		.pm	= &bmg160_pm_ops,
>> +	},
>> +	.probe		= bmg160_i2c_probe,
>> +	.remove		= bmg160_i2c_remove,
>> +	.id_table	= bmg160_i2c_id,
>> +};
>> +module_i2c_driver(bmg160_i2c_driver);
>> +
>> +MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_DESCRIPTION("BMG160 I2C Gyro driver");
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux