Re: [PATCH v3 4/6] iio: bmg160: Remove remaining uses of i2c_client

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Can you not merge this with patch 2/6?
On Wed, 2015-08-12 at 16:50 +0200, Markus Pargmann wrote:
> Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
> ---
>  drivers/iio/gyro/bmg160.c | 55 +++++++++++++++++++++++------------------------
>  1 file changed, 27 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/iio/gyro/bmg160.c b/drivers/iio/gyro/bmg160.c
> index 6eab91ba8977..39df64fb4262 100644
> --- a/drivers/iio/gyro/bmg160.c
> +++ b/drivers/iio/gyro/bmg160.c
> @@ -110,6 +110,7 @@ struct bmg160_data {
>  	int slope_thres;
>  	bool dready_trigger_on;
>  	bool motion_trigger_on;
> +	int irq;
>  };
>  
>  enum bmg160_axis {
> @@ -961,18 +962,14 @@ static const struct iio_buffer_setup_ops bmg160_buffer_setup_ops = {
>  	.postdisable = bmg160_buffer_postdisable,
>  };
>  
> -static int bmg160_gpio_probe(struct i2c_client *client,
> -			     struct bmg160_data *data)
> +static int bmg160_gpio_probe(struct bmg160_data *data)
>  
>  {
>  	struct device *dev;
>  	struct gpio_desc *gpio;
>  	int ret;
>  
> -	if (!client)
> -		return -EINVAL;
> -
> -	dev = &client->dev;
> +	dev = data->dev;
>  
>  	/* data ready gpio interrupt pin */
>  	gpio = devm_gpiod_get_index(dev, BMG160_GPIO_NAME, 0, GPIOD_IN);
> @@ -981,11 +978,11 @@ static int bmg160_gpio_probe(struct i2c_client *client,
>  		return PTR_ERR(gpio);
>  	}
>  
> -	ret = gpiod_to_irq(gpio);
> +	data->irq = gpiod_to_irq(gpio);
>  
>  	dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
>  
> -	return ret;
> +	return 0;
>  }
>  
>  static const char *bmg160_match_acpi_device(struct device *dev)
> @@ -1007,6 +1004,7 @@ static int bmg160_probe(struct i2c_client *client,
>  	int ret;
>  	const char *name = NULL;
>  	struct regmap *regmap;
> +	struct device *dev = &client->dev;
>  
>  	regmap = devm_regmap_init_i2c(client, &bmg160_regmap_i2c_conf);
>  	if (IS_ERR(regmap)) {
> @@ -1020,8 +1018,9 @@ static int bmg160_probe(struct i2c_client *client,
>  		return -ENOMEM;
>  
>  	data = iio_priv(indio_dev);
> -	dev_set_drvdata(&client->dev, indio_dev);
> -	data->dev = &client->dev;
> +	dev_set_drvdata(dev, indio_dev);
> +	data->dev = dev;
> +	data->irq = client->irq;
>  
>  	ret = bmg160_chip_init(data);
>  	if (ret < 0)
> @@ -1032,22 +1031,22 @@ static int bmg160_probe(struct i2c_client *client,
>  	if (id)
>  		name = id->name;
>  
> -	if (ACPI_HANDLE(&client->dev))
> -		name = bmg160_match_acpi_device(&client->dev);
> +	if (ACPI_HANDLE(dev))
> +		name = bmg160_match_acpi_device(dev);
>  
> -	indio_dev->dev.parent = &client->dev;
> +	indio_dev->dev.parent = dev;
>  	indio_dev->channels = bmg160_channels;
>  	indio_dev->num_channels = ARRAY_SIZE(bmg160_channels);
>  	indio_dev->name = name;
>  	indio_dev->modes = INDIO_DIRECT_MODE;
>  	indio_dev->info = &bmg160_info;
>  
> -	if (client->irq <= 0)
> -		client->irq = bmg160_gpio_probe(client, data);
> +	if (data->irq <= 0)
> +		bmg160_gpio_probe(data);
>  
> -	if (client->irq > 0) {
> -		ret = devm_request_threaded_irq(&client->dev,
> -						client->irq,
> +	if (data->irq > 0) {
> +		ret = devm_request_threaded_irq(dev,
> +						data->irq,
>  						bmg160_data_rdy_trig_poll,
>  						bmg160_event_handler,
>  						IRQF_TRIGGER_RISING,
> @@ -1056,28 +1055,28 @@ static int bmg160_probe(struct i2c_client *client,
>  		if (ret)
>  			return ret;
>  
> -		data->dready_trig = devm_iio_trigger_alloc(&client->dev,
> +		data->dready_trig = devm_iio_trigger_alloc(dev,
>  							   "%s-dev%d",
>  							   indio_dev->name,
>  							   indio_dev->id);
>  		if (!data->dready_trig)
>  			return -ENOMEM;
>  
> -		data->motion_trig = devm_iio_trigger_alloc(&client->dev,
> +		data->motion_trig = devm_iio_trigger_alloc(dev,
>  							  "%s-any-motion-dev%d",
>  							  indio_dev->name,
>  							  indio_dev->id);
>  		if (!data->motion_trig)
>  			return -ENOMEM;
>  
> -		data->dready_trig->dev.parent = &client->dev;
> +		data->dready_trig->dev.parent = dev;
>  		data->dready_trig->ops = &bmg160_trigger_ops;
>  		iio_trigger_set_drvdata(data->dready_trig, indio_dev);
>  		ret = iio_trigger_register(data->dready_trig);
>  		if (ret)
>  			return ret;
>  
> -		data->motion_trig->dev.parent = &client->dev;
> +		data->motion_trig->dev.parent = dev;
>  		data->motion_trig->ops = &bmg160_trigger_ops;
>  		iio_trigger_set_drvdata(data->motion_trig, indio_dev);
>  		ret = iio_trigger_register(data->motion_trig);
> @@ -1092,25 +1091,25 @@ static int bmg160_probe(struct i2c_client *client,
>  					 bmg160_trigger_handler,
>  					 &bmg160_buffer_setup_ops);
>  	if (ret < 0) {
> -		dev_err(&client->dev,
> +		dev_err(dev,
>  			"iio triggered buffer setup failed\n");
>  		goto err_trigger_unregister;
>  	}
>  
>  	ret = iio_device_register(indio_dev);
>  	if (ret < 0) {
> -		dev_err(&client->dev, "unable to register iio device\n");
> +		dev_err(dev, "unable to register iio device\n");
>  		goto err_buffer_cleanup;
>  	}
>  
> -	ret = pm_runtime_set_active(&client->dev);
> +	ret = pm_runtime_set_active(dev);
>  	if (ret)
>  		goto err_iio_unregister;
>  
> -	pm_runtime_enable(&client->dev);
> -	pm_runtime_set_autosuspend_delay(&client->dev,
> +	pm_runtime_enable(dev);
> +	pm_runtime_set_autosuspend_delay(dev,
>  					 BMG160_AUTO_SUSPEND_DELAY_MS);
> -	pm_runtime_use_autosuspend(&client->dev);
> +	pm_runtime_use_autosuspend(dev);
>  
>  	return 0;
>  


--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux