Add 2 new definition entries to support ak0991x compass. Add a more advanced function to check we are dealing with the expected device. Remove standalone driver for ak09911. Tested-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx> Signed-off-by: Gwendal Grignou <gwendal@xxxxxxxxxxxx> --- drivers/iio/magnetometer/Kconfig | 15 +- drivers/iio/magnetometer/Makefile | 1 - drivers/iio/magnetometer/ak09911.c | 326 ------------------------------------- drivers/iio/magnetometer/ak8975.c | 195 ++++++++++++++++++++-- 4 files changed, 184 insertions(+), 353 deletions(-) delete mode 100644 drivers/iio/magnetometer/ak09911.c diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index b2dba9e..4c7a4c5 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -6,26 +6,21 @@ menu "Magnetometer sensors" config AK8975 - tristate "Asahi Kasei AK8975 3-Axis Magnetometer" + tristate "Asahi Kasei AK 3-Axis Magnetometer" depends on I2C depends on GPIOLIB help - Say yes here to build support for Asahi Kasei AK8975 3-Axis - Magnetometer. This driver can also support AK8963, if i2c - device name is identified as ak8963. + Say yes here to build support for Asahi Kasei AK8975, AK8963, + AK09911 or AK09912 3-Axis Magnetometer. To compile this driver as a module, choose M here: the module will be called ak8975. config AK09911 tristate "Asahi Kasei AK09911 3-axis Compass" - depends on I2C + select AK8975 help - Say yes here to build support for Asahi Kasei AK09911 3-Axis - Magnetometer. - - To compile this driver as a module, choose M here: the module - will be called ak09911. + Deprecated: AK09911 is now supported by AK8975 driver. config MAG3110 tristate "Freescale MAG3110 3-Axis Magnetometer" diff --git a/drivers/iio/magnetometer/Makefile b/drivers/iio/magnetometer/Makefile index b91315e..0f5d3c9 100644 --- a/drivers/iio/magnetometer/Makefile +++ b/drivers/iio/magnetometer/Makefile @@ -3,7 +3,6 @@ # # When adding new entries keep the list in alphabetical order -obj-$(CONFIG_AK09911) += ak09911.o obj-$(CONFIG_AK8975) += ak8975.o obj-$(CONFIG_MAG3110) += mag3110.o obj-$(CONFIG_HID_SENSOR_MAGNETOMETER_3D) += hid-sensor-magn-3d.o diff --git a/drivers/iio/magnetometer/ak09911.c b/drivers/iio/magnetometer/ak09911.c deleted file mode 100644 index b2bc942..0000000 --- a/drivers/iio/magnetometer/ak09911.c +++ /dev/null @@ -1,326 +0,0 @@ -/* - * AK09911 3-axis compass driver - * Copyright (c) 2014, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/i2c.h> -#include <linux/acpi.h> -#include <linux/iio/iio.h> - -#define AK09911_REG_WIA1 0x00 -#define AK09911_REG_WIA2 0x01 -#define AK09911_WIA1_VALUE 0x48 -#define AK09911_WIA2_VALUE 0x05 - -#define AK09911_REG_ST1 0x10 -#define AK09911_REG_HXL 0x11 -#define AK09911_REG_HXH 0x12 -#define AK09911_REG_HYL 0x13 -#define AK09911_REG_HYH 0x14 -#define AK09911_REG_HZL 0x15 -#define AK09911_REG_HZH 0x16 - -#define AK09911_REG_ASAX 0x60 -#define AK09911_REG_ASAY 0x61 -#define AK09911_REG_ASAZ 0x62 - -#define AK09911_REG_CNTL1 0x30 -#define AK09911_REG_CNTL2 0x31 -#define AK09911_REG_CNTL3 0x32 - -#define AK09911_MODE_SNG_MEASURE 0x01 -#define AK09911_MODE_SELF_TEST 0x10 -#define AK09911_MODE_FUSE_ACCESS 0x1F -#define AK09911_MODE_POWERDOWN 0x00 -#define AK09911_RESET_DATA 0x01 - -#define AK09911_REG_CNTL1 0x30 -#define AK09911_REG_CNTL2 0x31 -#define AK09911_REG_CNTL3 0x32 - -#define AK09911_RAW_TO_GAUSS(asa) ((((asa) + 128) * 6000) / 256) - -#define AK09911_MAX_CONVERSION_TIMEOUT_MS 500 -#define AK09911_CONVERSION_DONE_POLL_TIME_MS 10 - -struct ak09911_data { - struct i2c_client *client; - struct mutex lock; - u8 asa[3]; - long raw_to_gauss[3]; -}; - -static const int ak09911_index_to_reg[] = { - AK09911_REG_HXL, AK09911_REG_HYL, AK09911_REG_HZL, -}; - -static int ak09911_set_mode(struct i2c_client *client, u8 mode) -{ - int ret; - - switch (mode) { - case AK09911_MODE_SNG_MEASURE: - case AK09911_MODE_SELF_TEST: - case AK09911_MODE_FUSE_ACCESS: - case AK09911_MODE_POWERDOWN: - ret = i2c_smbus_write_byte_data(client, - AK09911_REG_CNTL2, mode); - if (ret < 0) { - dev_err(&client->dev, "set_mode error\n"); - return ret; - } - /* After mode change wait atleast 100us */ - usleep_range(100, 500); - break; - default: - dev_err(&client->dev, - "%s: Unknown mode(%d).", __func__, mode); - return -EINVAL; - } - - return ret; -} - -/* Get Sensitivity Adjustment value */ -static int ak09911_get_asa(struct i2c_client *client) -{ - struct iio_dev *indio_dev = i2c_get_clientdata(client); - struct ak09911_data *data = iio_priv(indio_dev); - int ret; - - ret = ak09911_set_mode(client, AK09911_MODE_FUSE_ACCESS); - if (ret < 0) - return ret; - - /* Get asa data and store in the device data. */ - ret = i2c_smbus_read_i2c_block_data(client, AK09911_REG_ASAX, - 3, data->asa); - if (ret < 0) { - dev_err(&client->dev, "Not able to read asa data\n"); - return ret; - } - - ret = ak09911_set_mode(client, AK09911_MODE_POWERDOWN); - if (ret < 0) - return ret; - - data->raw_to_gauss[0] = AK09911_RAW_TO_GAUSS(data->asa[0]); - data->raw_to_gauss[1] = AK09911_RAW_TO_GAUSS(data->asa[1]); - data->raw_to_gauss[2] = AK09911_RAW_TO_GAUSS(data->asa[2]); - - return 0; -} - -static int ak09911_verify_chip_id(struct i2c_client *client) -{ - u8 wia_val[2]; - int ret; - - ret = i2c_smbus_read_i2c_block_data(client, AK09911_REG_WIA1, - 2, wia_val); - if (ret < 0) { - dev_err(&client->dev, "Error reading WIA\n"); - return ret; - } - - dev_dbg(&client->dev, "WIA %02x %02x\n", wia_val[0], wia_val[1]); - - if (wia_val[0] != AK09911_WIA1_VALUE || - wia_val[1] != AK09911_WIA2_VALUE) { - dev_err(&client->dev, "Device ak09911 not found\n"); - return -ENODEV; - } - - return 0; -} - -static int wait_conversion_complete_polled(struct ak09911_data *data) -{ - struct i2c_client *client = data->client; - u8 read_status; - u32 timeout_ms = AK09911_MAX_CONVERSION_TIMEOUT_MS; - int ret; - - /* Wait for the conversion to complete. */ - while (timeout_ms) { - msleep_interruptible(AK09911_CONVERSION_DONE_POLL_TIME_MS); - ret = i2c_smbus_read_byte_data(client, AK09911_REG_ST1); - if (ret < 0) { - dev_err(&client->dev, "Error in reading ST1\n"); - return ret; - } - read_status = ret & 0x01; - if (read_status) - break; - timeout_ms -= AK09911_CONVERSION_DONE_POLL_TIME_MS; - } - if (!timeout_ms) { - dev_err(&client->dev, "Conversion timeout happened\n"); - return -EIO; - } - - return read_status; -} - -static int ak09911_read_axis(struct iio_dev *indio_dev, int index, int *val) -{ - struct ak09911_data *data = iio_priv(indio_dev); - struct i2c_client *client = data->client; - int ret; - - mutex_lock(&data->lock); - - ret = ak09911_set_mode(client, AK09911_MODE_SNG_MEASURE); - if (ret < 0) - goto fn_exit; - - ret = wait_conversion_complete_polled(data); - if (ret < 0) - goto fn_exit; - - /* Read data */ - ret = i2c_smbus_read_word_data(client, ak09911_index_to_reg[index]); - if (ret < 0) { - dev_err(&client->dev, "Read axis data fails\n"); - goto fn_exit; - } - - mutex_unlock(&data->lock); - - /* Clamp to valid range. */ - *val = sign_extend32(clamp_t(s16, ret, -8192, 8191), 13); - - return IIO_VAL_INT; - -fn_exit: - mutex_unlock(&data->lock); - - return ret; -} - -static int ak09911_read_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int *val, int *val2, - long mask) -{ - struct ak09911_data *data = iio_priv(indio_dev); - - switch (mask) { - case IIO_CHAN_INFO_RAW: - return ak09911_read_axis(indio_dev, chan->address, val); - case IIO_CHAN_INFO_SCALE: - *val = 0; - *val2 = data->raw_to_gauss[chan->address]; - return IIO_VAL_INT_PLUS_MICRO; - } - - return -EINVAL; -} - -#define AK09911_CHANNEL(axis, index) \ - { \ - .type = IIO_MAGN, \ - .modified = 1, \ - .channel2 = IIO_MOD_##axis, \ - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ - BIT(IIO_CHAN_INFO_SCALE), \ - .address = index, \ - } - -static const struct iio_chan_spec ak09911_channels[] = { - AK09911_CHANNEL(X, 0), AK09911_CHANNEL(Y, 1), AK09911_CHANNEL(Z, 2), -}; - -static const struct iio_info ak09911_info = { - .read_raw = &ak09911_read_raw, - .driver_module = THIS_MODULE, -}; - -static const struct acpi_device_id ak_acpi_match[] = { - {"AK009911", 0}, - { }, -}; -MODULE_DEVICE_TABLE(acpi, ak_acpi_match); - -static int ak09911_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct iio_dev *indio_dev; - struct ak09911_data *data; - const char *name; - int ret; - - ret = ak09911_verify_chip_id(client); - if (ret) { - dev_err(&client->dev, "AK00911 not detected\n"); - return -ENODEV; - } - - indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); - if (indio_dev == NULL) - return -ENOMEM; - - data = iio_priv(indio_dev); - i2c_set_clientdata(client, indio_dev); - - data->client = client; - mutex_init(&data->lock); - - ret = ak09911_get_asa(client); - if (ret) - return ret; - - if (id) - name = id->name; - else if (ACPI_HANDLE(&client->dev)) - name = dev_name(&client->dev); - else - return -ENODEV; - - dev_dbg(&client->dev, "Asahi compass chip %s\n", name); - - indio_dev->dev.parent = &client->dev; - indio_dev->channels = ak09911_channels; - indio_dev->num_channels = ARRAY_SIZE(ak09911_channels); - indio_dev->info = &ak09911_info; - indio_dev->modes = INDIO_DIRECT_MODE; - indio_dev->name = name; - - return devm_iio_device_register(&client->dev, indio_dev); -} - -static const struct i2c_device_id ak09911_id[] = { - {"ak09911", 0}, - {} -}; - -MODULE_DEVICE_TABLE(i2c, ak09911_id); - -static struct i2c_driver ak09911_driver = { - .driver = { - .name = "ak09911", - .acpi_match_table = ACPI_PTR(ak_acpi_match), - }, - .probe = ak09911_probe, - .id_table = ak09911_id, -}; -module_i2c_driver(ak09911_driver); - -MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>"); -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("AK09911 Compass driver"); diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c index 58c9a78..55d4732 100644 --- a/drivers/iio/magnetometer/ak8975.c +++ b/drivers/iio/magnetometer/ak8975.c @@ -81,6 +81,58 @@ #define AK8975_MAX_REGS AK8975_REG_ASAZ /* + * AK09912 Register definitions + */ +#define AK09912_REG_WIA1 0x00 +#define AK09912_REG_WIA2 0x01 +#define AK09912_DEVICE_ID 0x04 +#define AK09911_DEVICE_ID 0x05 + +#define AK09911_REG_INFO1 0x02 +#define AK09911_REG_INFO2 0x03 + +#define AK09912_REG_ST1 0x10 + +#define AK09912_REG_ST1_DRDY_SHIFT 0 +#define AK09912_REG_ST1_DRDY_MASK (1 << AK09912_REG_ST1_DRDY_SHIFT) + +#define AK09912_REG_HXL 0x11 +#define AK09912_REG_HXH 0x12 +#define AK09912_REG_HYL 0x13 +#define AK09912_REG_HYH 0x14 +#define AK09912_REG_HZL 0x15 +#define AK09912_REG_HZH 0x16 +#define AK09912_REG_TMPS 0x17 + +#define AK09912_REG_ST2 0x18 +#define AK09912_REG_ST2_HOFL_SHIFT 3 +#define AK09912_REG_ST2_HOFL_MASK (1 << AK09912_REG_ST2_HOFL_SHIFT) + +#define AK09912_REG_CNTL1 0x30 + +#define AK09912_REG_CNTL2 0x31 +#define AK09912_REG_CNTL_MODE_POWER_DOWN 0x00 +#define AK09912_REG_CNTL_MODE_ONCE 0x01 +#define AK09912_REG_CNTL_MODE_SELF_TEST 0x10 +#define AK09912_REG_CNTL_MODE_FUSE_ROM 0x1F +#define AK09912_REG_CNTL2_MODE_SHIFT 0 +#define AK09912_REG_CNTL2_MODE_MASK (0x1F << AK09912_REG_CNTL2_MODE_SHIFT) + +#define AK09912_REG_CNTL3 0x32 + +#define AK09912_REG_TS1 0x33 +#define AK09912_REG_TS2 0x34 +#define AK09912_REG_TS3 0x35 +#define AK09912_REG_I2CDIS 0x36 +#define AK09912_REG_TS4 0x37 + +#define AK09912_REG_ASAX 0x60 +#define AK09912_REG_ASAY 0x61 +#define AK09912_REG_ASAZ 0x62 + +#define AK09912_MAX_REGS AK09912_REG_ASAZ + +/* * Miscellaneous values. */ #define AK8975_MAX_CONVERSION_TIMEOUT 500 @@ -130,22 +182,37 @@ long ak8975_raw_to_gauss(u16 data) } /* - * For AK8963, same calculation, but the device is less sensitive: + * For AK8963 and AK09911, same calculation, but the device is less sensitive: * * H is in the range of +-8190. The magnetometer has a range of * +-4912uT. To go from the raw value to uT is: * * HuT = H * 4912/8190, or roughly, 6/10, instead of 3/10. */ -long ak8963_raw_to_gauss(u16 data) +long ak8963_09911_raw_to_gauss(u16 data) { return (((long)data + 128) * 6000) / 256; } +/* + * For AK09912, same calculation, except the device is more sensitive: + * + * H is in the range of -32752 to 32752. The magnetometer has a range of + * +-4912uT. To go from the raw value to uT is: + * + * HuT = H * 4912/32752, or roughly, 3/20, instead of 3/10. + */ +long ak09912_raw_to_gauss(u16 data) +{ + return (((long)data + 128) * 1500) / 256; +} + /* Compatible Asahi Kasei Compass parts */ enum asahi_compass_chipset { AK8975, AK8963, + AK09911, + AK09912, AK_MAX_TYPE }; @@ -210,7 +277,7 @@ struct ak_def { }, { .type = AK8963, - .raw_to_gauss = ak8963_raw_to_gauss, + .raw_to_gauss = ak8963_09911_raw_to_gauss, .range = 8190, .ctrl_regs = { AK8975_REG_ST1, @@ -233,6 +300,56 @@ struct ak_def { AK8975_REG_HYL, AK8975_REG_HZL}, }, + { + .type = AK09911, + .raw_to_gauss = ak8963_09911_raw_to_gauss, + .range = 8192, + .ctrl_regs = { + AK09912_REG_ST1, + AK09912_REG_ST2, + AK09912_REG_CNTL2, + AK09912_REG_ASAX, + AK09912_MAX_REGS}, + .ctrl_masks = { + AK09912_REG_ST1_DRDY_MASK, + AK09912_REG_ST2_HOFL_MASK, + 0, + AK09912_REG_CNTL2_MODE_MASK}, + .ctrl_modes = { + AK09912_REG_CNTL_MODE_POWER_DOWN, + AK09912_REG_CNTL_MODE_ONCE, + AK09912_REG_CNTL_MODE_SELF_TEST, + AK09912_REG_CNTL_MODE_FUSE_ROM}, + .data_regs = { + AK09912_REG_HXL, + AK09912_REG_HYL, + AK09912_REG_HZL}, + }, + { + .type = AK09912, + .raw_to_gauss = ak09912_raw_to_gauss, + .range = 32752, + .ctrl_regs = { + AK09912_REG_ST1, + AK09912_REG_ST2, + AK09912_REG_CNTL2, + AK09912_REG_ASAX, + AK09912_MAX_REGS}, + .ctrl_masks = { + AK09912_REG_ST1_DRDY_MASK, + AK09912_REG_ST2_HOFL_MASK, + 0, + AK09912_REG_CNTL2_MODE_MASK}, + .ctrl_modes = { + AK09912_REG_CNTL_MODE_POWER_DOWN, + AK09912_REG_CNTL_MODE_ONCE, + AK09912_REG_CNTL_MODE_SELF_TEST, + AK09912_REG_CNTL_MODE_FUSE_ROM}, + .data_regs = { + AK09912_REG_HXL, + AK09912_REG_HYL, + AK09912_REG_HZL}, + } }; /* @@ -253,6 +370,52 @@ struct ak8975_data { }; /* + * Return 0 if the i2c device is the one we expect. + * return a negative error number otherwise + */ +static int ak8975_who_i_am(struct i2c_client *client, + enum asahi_compass_chipset type) +{ + u8 wia_val[2]; + int ret; + + /* + * Signature for each device: + * Device | WIA1 | WIA2 + * AK09912 | DEVICE_ID | AK09912_DEVICE_ID + * AK09911 | DEVICE_ID | AK09911_DEVICE_ID + * AK8975 | DEVICE_ID | NA + * AK8963 | DEVICE_ID | NA + */ + ret = i2c_smbus_read_i2c_block_data(client, AK09912_REG_WIA1, + 2, wia_val); + if (ret < 0) { + dev_err(&client->dev, "Error reading WIA\n"); + return ret; + } + + if (wia_val[0] != AK8975_DEVICE_ID) + return -ENODEV; + + switch (type) { + case AK8975: + case AK8963: + return 0; + case AK09911: + if (wia_val[1] == AK09911_DEVICE_ID) + return 0; + break; + case AK09912: + if (wia_val[1] == AK09912_DEVICE_ID) + return 0; + break; + default: + dev_err(&client->dev, "Type %d unknown\n", type); + } + return -ENODEV; +} + +/* * Helper function to write to CNTL register. */ static int ak8975_set_mode(struct ak8975_data *data, enum ak_ctrl_mode mode) @@ -327,21 +490,8 @@ static int ak8975_setup(struct i2c_client *client) { struct iio_dev *indio_dev = i2c_get_clientdata(client); struct ak8975_data *data = iio_priv(indio_dev); - u8 device_id; int ret; - /* Confirm that the device we're talking to is really an AK8975. */ - ret = i2c_smbus_read_byte_data(client, AK8975_REG_WIA); - if (ret < 0) { - dev_err(&client->dev, "Error reading WIA\n"); - return ret; - } - device_id = ret; - if (device_id != AK8975_DEVICE_ID) { - dev_err(&client->dev, "Device ak8975 not found\n"); - return -ENODEV; - } - /* Write the fused rom access mode. */ ret = ak8975_set_mode(data, FUSE_ROM); if (ret < 0) { @@ -552,6 +702,8 @@ static const struct acpi_device_id ak_acpi_match[] = { {"AK8975", AK8975}, {"AK8963", AK8963}, {"INVN6500", AK8963}, + {"AK09911", AK09911}, + {"AK09912", AK09912}, { }, }; MODULE_DEVICE_TABLE(acpi, ak_acpi_match); @@ -631,6 +783,11 @@ static int ak8975_probe(struct i2c_client *client, } data->def = &ak_def_array[chipset]; + err = ak8975_who_i_am(client, data->def->type); + if (err < 0) { + dev_err(&client->dev, "Unexpected device\n"); + return err; + } dev_dbg(&client->dev, "Asahi compass chip %s\n", name); /* Perform some basic start-of-day setup of the device. */ @@ -653,6 +810,8 @@ static int ak8975_probe(struct i2c_client *client, static const struct i2c_device_id ak8975_id[] = { {"ak8975", AK8975}, {"ak8963", AK8963}, + {"ak09911", AK09911}, + {"ak09912", AK09912}, {} }; @@ -663,6 +822,10 @@ static const struct of_device_id ak8975_of_match[] = { { .compatible = "ak8975", }, { .compatible = "asahi-kasei,ak8963", }, { .compatible = "ak8963", }, + { .compatible = "asahi-kasei,ak09911", }, + { .compatible = "ak09911", }, + { .compatible = "asahi-kasei,ak09912", }, + { .compatible = "ak09912", }, {} }; MODULE_DEVICE_TABLE(of, ak8975_of_match); -- 2.1.0.rc2.206.gedb03e5 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html