Fixes code duplication, return of function. Check client->irq properly when setting up optional irq handler. Signed-off-by: Gwendal Grignou <gwendal@xxxxxxxxxxxx> Reviewed-by: Hartmut Knaack <knaack.h@xxxxxx> --- drivers/iio/magnetometer/ak8975.c | 35 ++++++++++++++--------------------- 1 file changed, 14 insertions(+), 21 deletions(-) diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c index bf5ef07..4e69480 100644 --- a/drivers/iio/magnetometer/ak8975.c +++ b/drivers/iio/magnetometer/ak8975.c @@ -64,10 +64,10 @@ #define AK8975_REG_CNTL 0x0A #define AK8975_REG_CNTL_MODE_SHIFT 0 #define AK8975_REG_CNTL_MODE_MASK (0xF << AK8975_REG_CNTL_MODE_SHIFT) -#define AK8975_REG_CNTL_MODE_POWER_DOWN 0 -#define AK8975_REG_CNTL_MODE_ONCE 1 -#define AK8975_REG_CNTL_MODE_SELF_TEST 8 -#define AK8975_REG_CNTL_MODE_FUSE_ROM 0xF +#define AK8975_REG_CNTL_MODE_POWER_DOWN 0x00 +#define AK8975_REG_CNTL_MODE_ONCE 0x01 +#define AK8975_REG_CNTL_MODE_SELF_TEST 0x08 +#define AK8975_REG_CNTL_MODE_FUSE_ROM 0x0F #define AK8975_REG_RSVC 0x0B #define AK8975_REG_ASTC 0x0C @@ -166,8 +166,8 @@ static int ak8975_setup_irq(struct ak8975_data *data) irq = gpio_to_irq(data->eoc_gpio); rc = devm_request_irq(&client->dev, irq, ak8975_irq_handler, - IRQF_TRIGGER_RISING | IRQF_ONESHOT, - dev_name(&client->dev), data); + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + dev_name(&client->dev), data); if (rc < 0) { dev_err(&client->dev, "irq %d request failed, (gpio %d): %d\n", @@ -231,8 +231,12 @@ static int ak8975_setup(struct i2c_client *client) AK8975_REG_CNTL_MODE_POWER_DOWN, AK8975_REG_CNTL_MODE_MASK, AK8975_REG_CNTL_MODE_SHIFT); + if (ret < 0) { + dev_err(&client->dev, "Error in setting power-down mode\n"); + return ret; + } - if (data->eoc_gpio > 0 || client->irq) { + if (data->eoc_gpio > 0 || client->irq > 0) { ret = ak8975_setup_irq(data); if (ret < 0) { dev_err(&client->dev, @@ -241,11 +245,6 @@ static int ak8975_setup(struct i2c_client *client) } } - if (ret < 0) { - dev_err(&client->dev, "Error in setting power-down mode\n"); - return ret; - } - /* * Precalculate scale factor (in Gauss units) for each axis and * store in the device data. @@ -550,24 +549,18 @@ static int ak8975_probe(struct i2c_client *client, /* Perform some basic start-of-day setup of the device. */ err = ak8975_setup(client); if (err < 0) { - dev_err(&client->dev, "AK8975 initialization fails\n"); + dev_err(&client->dev, "%s initialization fails\n", name); return err; } - data->client = client; mutex_init(&data->lock); - data->eoc_gpio = eoc_gpio; indio_dev->dev.parent = &client->dev; indio_dev->channels = ak8975_channels; indio_dev->num_channels = ARRAY_SIZE(ak8975_channels); indio_dev->info = &ak8975_info; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->name = name; - err = devm_iio_device_register(&client->dev, indio_dev); - if (err < 0) - return err; - - return 0; + return devm_iio_device_register(&client->dev, indio_dev); } static const struct i2c_device_id ak8975_id[] = { @@ -588,7 +581,7 @@ MODULE_DEVICE_TABLE(of, ak8975_of_match); static struct i2c_driver ak8975_driver = { .driver = { .name = "ak8975", - .of_match_table = ak8975_of_match, + .of_match_table = of_match_ptr(ak8975_of_match), .acpi_match_table = ACPI_PTR(ak_acpi_match), }, .probe = ak8975_probe, -- 2.1.0.rc2.206.gedb03e5 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html