Dan Murphy schrieb am 06.11.2014 16:18: > Add the TI afe4403 heart monitor device tree > binding documentation. heart_monitors directory > created under iio. > I found a small typo in the comment. > Signed-off-by: Dan Murphy <dmurphy@xxxxxx> > --- > > v2 - Updated per v1 comments - http://marc.info/?l=linux-iio&m=141331404132215&w=2 > > .../bindings/iio/heart_monitor/ti_afe4403.txt | 23 ++++++++++++++++++++++ > 1 file changed, 23 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/heart_monitor/ti_afe4403.txt > > diff --git a/Documentation/devicetree/bindings/iio/heart_monitor/ti_afe4403.txt b/Documentation/devicetree/bindings/iio/heart_monitor/ti_afe4403.txt > new file mode 100644 > index 0000000..cf75b5a > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/heart_monitor/ti_afe4403.txt > @@ -0,0 +1,23 @@ > +* Texas Instruments - AFE4403 Heart rate and Pulse Oximeter > + > +The device consists of a low-noise receiver channel > +with an integrated analog-to-digital converter (ADC), > +an LED transmit section, and diagnostics for sensor and LED fault detection. Typo: a LED ... > + > +Required properties: > + - compatible: Must contain "ti,afe4403". > + - ste-gpio: GPIO for the spi control line > + - data-ready-gpio: GPIO interrupt when the afe4403 has data > + - led-supply: Chip supply to the device > + > +Optional properties: > + - reset-gpio: GPIO used to reset the device via HW > + > +Example: > + > +&heart_rate { > + compatible = "ti,afe4403"; > + ste-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; > + data-ready-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; > + led-supply = <&vbat>; > +}; > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
