[RFC v2 2/3] iio: bindings: Add TI afe4403 heart monitor documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the TI afe4403 heart monitor device tree
binding documentation.  heart_monitors directory
created under iio.

Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---

v2 - Updated per v1 comments - http://marc.info/?l=linux-iio&m=141331404132215&w=2

 .../bindings/iio/heart_monitor/ti_afe4403.txt      | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/heart_monitor/ti_afe4403.txt

diff --git a/Documentation/devicetree/bindings/iio/heart_monitor/ti_afe4403.txt b/Documentation/devicetree/bindings/iio/heart_monitor/ti_afe4403.txt
new file mode 100644
index 0000000..cf75b5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/heart_monitor/ti_afe4403.txt
@@ -0,0 +1,23 @@
+* Texas Instruments - AFE4403 Heart rate and Pulse Oximeter
+
+The device consists of a low-noise receiver channel
+with an integrated analog-to-digital converter (ADC),
+an LED transmit section, and diagnostics for sensor and LED fault detection.
+
+Required properties:
+  - compatible: Must contain "ti,afe4403".
+  - ste-gpio: GPIO for the spi control line
+  - data-ready-gpio: GPIO interrupt when the afe4403 has data
+  - led-supply: Chip supply to the device
+
+Optional properties:
+  - reset-gpio: GPIO used to reset the device via HW
+
+Example:
+
+&heart_rate {
+	compatible = "ti,afe4403";
+	ste-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+	data-ready-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	led-supply = <&vbat>;
+};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux