Re: [RFC/PATCH 3/6] sensorhub: Add sensorhub bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/09/14 15:55, Karol Wrona wrote:
> Add sensorhub bindings for sensorhub on Galaxy Gear 2.
> 
> Signed-off-by: Karol Wrona <k.wrona@xxxxxxxxxxx>
> Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/misc/sensorhub.txt         |   51 ++++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/misc/sensorhub.txt
> 
> diff --git a/Documentation/devicetree/bindings/misc/sensorhub.txt b/Documentation/devicetree/bindings/misc/sensorhub.txt
> new file mode 100644
> index 0000000..b43c2b7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/misc/sensorhub.txt
> @@ -0,0 +1,50 @@
> +Samsung Sensorhub driver
> +
> +Sensorhub is MCU which manages several sensors and also play the role
> +of virtual sensor device.
> +
> +Required properties:
> +- compatible: "samsung,sensorhub-rinato" or "samsung,sensorhub-thermostat"
> +- spi-max-frequency: max SPI clock frequency
> +- interrupt-parent
> +- interrupts: communication interrupt
> +- ap-mcu-int: [out] ap to sensorhub line - used during communication
Ah, why call it int?  I assumed when reading some of the code that it was an interrupt line.

> +- mcu-ap-int: [in] sensorhub to ap - used during communication
> +- mcu-reset: [out] sensorhub reset
> +- mag-table: magnitude table
Magnitude of what?
> +
> +Optional properties:
> +- sensor's nodes:
> +  compatible = "samsung,mpu6500-accel"
> +  compatible = "samsung,mpu6500-gyro"
> +  compatible = "samsung,adpd142"
> +
> +Sensor compatibles are used to match proper sensor driver to real sensor on
> +the board. The firmware does not give such information, so it helps to specify
> +some sensors properties. Sensors have "samsung" prefixes because frequently
> +they will not have much in common with sensors used without sensorhub because
> +it can do some data processing.
I wonder if we can make the ssp bit explicit as well.  Chances are samsung might
have another device similar to this (but with a different driver) in future.

> +
> +Example:
> +
> +	shub_spi: shub {
> +		compatible = "samsung,rinato-ssp-spi";
> +		spi-max-frequency = <5000000>;
> +		interrupt-parent = <&gpx0>;
> +		interrupts = <2 0>;
> +		ap-mcu-int = <&gpx0 0 0>;
> +		mcu-ap-int = <&gpx0 4 0>;
> +		mcu-reset = <&gpx0 5 0>;
> +		mag-table = /bits/ 8 <110 85 171 71 203 195 0 67
> +				208 56 175 244 206 213 0 92 250 0
> +				55 48 189 252 171 243 13 45 250>;
> +		sensor@0 {
> +			compatible = "samsung,mpu6500-accel";
> +		};
> +		sensor@1 {
> +			compatible = "samsung,mpu6500-gyro";
> +		};
> +		sensor@2 {
> +			compatible = "samsung,adpd142";
> +		};
> +	};
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux