Add sensorhub bindings for sensorhub on Galaxy Gear 2.
Signed-off-by: Karol Wrona <k.wrona@xxxxxxxxxxx>
Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
.../devicetree/bindings/misc/sensorhub.txt | 51 ++++++++++++++++++++
1 file changed, 51 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/sensorhub.txt
diff --git a/Documentation/devicetree/bindings/misc/sensorhub.txt b/Documentation/devicetree/bindings/misc/sensorhub.txt
new file mode 100644
index 0000000..b43c2b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/sensorhub.txt
@@ -0,0 +1,50 @@
+Samsung Sensorhub driver
+
+Sensorhub is MCU which manages several sensors and also play the role
+of virtual sensor device.
+
+Required properties:
+- compatible: "samsung,sensorhub-rinato" or "samsung,sensorhub-thermostat"
+- spi-max-frequency: max SPI clock frequency
+- interrupt-parent
+- interrupts: communication interrupt
+- ap-mcu-int: [out] ap to sensorhub line - used during communication
+- mcu-ap-int: [in] sensorhub to ap - used during communication
+- mcu-reset: [out] sensorhub reset
+- mag-table: magnitude table
+
+Optional properties:
+- sensor's nodes:
+ compatible = "samsung,mpu6500-accel"
+ compatible = "samsung,mpu6500-gyro"
+ compatible = "samsung,adpd142"
+
+Sensor compatibles are used to match proper sensor driver to real sensor on
+the board. The firmware does not give such information, so it helps to specify
+some sensors properties. Sensors have "samsung" prefixes because frequently
+they will not have much in common with sensors used without sensorhub because
+it can do some data processing.
+
+Example:
+
+ shub_spi: shub {
+ compatible = "samsung,rinato-ssp-spi";
+ spi-max-frequency = <5000000>;
+ interrupt-parent = <&gpx0>;
+ interrupts = <2 0>;
+ ap-mcu-int = <&gpx0 0 0>;
+ mcu-ap-int = <&gpx0 4 0>;
+ mcu-reset = <&gpx0 5 0>;
+ mag-table = /bits/ 8 <110 85 171 71 203 195 0 67
+ 208 56 175 244 206 213 0 92 250 0
+ 55 48 189 252 171 243 13 45 250>;
+ sensor@0 {
+ compatible = "samsung,mpu6500-accel";
+ };
+ sensor@1 {
+ compatible = "samsung,mpu6500-gyro";
+ };
+ sensor@2 {
+ compatible = "samsung,adpd142";
+ };
+ };
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
