Angelo Compagnucci schrieb: > This patch adds support for ADC128S052 from TI. > > Signed-off-by: Angelo Compagnucci <angelo.compagnucci@xxxxxxxxx> > --- Sorry, found another issue in your probe function. See inline. > > * Fixed indentation of adc128_read_raw > * Fixed return logic in adc128_read_raw > > drivers/iio/adc/Kconfig | 10 +++ > drivers/iio/adc/Makefile | 1 + > drivers/iio/adc/ti-adc128s052.c | 177 ++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 188 insertions(+) > create mode 100644 drivers/iio/adc/ti-adc128s052.c > > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig > index 11b048a..3ea56a3 100644 > --- a/drivers/iio/adc/Kconfig > +++ b/drivers/iio/adc/Kconfig > @@ -216,6 +216,16 @@ config TI_ADC081C > This driver can also be built as a module. If so, the module will be > called ti-adc081c. > > +config TI_ADC128S052 > + tristate "Texas Instruments ADC128S052" > + depends on SPI > + help > + If you say yes here you get support for Texas Instruments ADC128S052 > + chip. > + > + This driver can also be built as a module. If so, the module will be > + called ti-adc128s052. > + > config TI_AM335X_ADC > tristate "TI's AM335X ADC driver" > depends on MFD_TI_AM335X_TSCADC > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile > index ad81b51..9cc37f6 100644 > --- a/drivers/iio/adc/Makefile > +++ b/drivers/iio/adc/Makefile > @@ -23,6 +23,7 @@ obj-$(CONFIG_MCP3422) += mcp3422.o > obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o > obj-$(CONFIG_NAU7802) += nau7802.o > obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o > +obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o > obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o > obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o > obj-$(CONFIG_TWL6030_GPADC) += twl6030-gpadc.o > diff --git a/drivers/iio/adc/ti-adc128s052.c b/drivers/iio/adc/ti-adc128s052.c > new file mode 100644 > index 0000000..f8a218b > --- /dev/null > +++ b/drivers/iio/adc/ti-adc128s052.c > @@ -0,0 +1,177 @@ > +/* > + * Copyright (C) 2014 Angelo Compagnucci <angelo.compagnucci@xxxxxxxxx> > + * > + * Driver for Texas Instruments' ADC128S052 ADC chip. > + * Datasheet can be found here: > + * http://www.ti.com/lit/ds/symlink/adc128s052.pdf > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/err.h> > +#include <linux/spi/spi.h> > +#include <linux/module.h> > +#include <linux/iio/iio.h> > +#include <linux/regulator/consumer.h> > + > +struct adc128 { > + struct spi_device *spi; > + > + struct regulator *reg; > + struct mutex lock; > + > + u8 buffer[2] ____cacheline_aligned; > +}; > + > +static int adc128_adc_conversion(struct adc128 *adc, u8 channel) > +{ > + int ret; > + > + mutex_lock(&adc->lock); > + > + adc->buffer[0] = channel << 3; > + adc->buffer[1] = 0; > + > + ret = spi_write(adc->spi, &adc->buffer, 2); > + if (ret < 0) { > + mutex_unlock(&adc->lock); > + return ret; > + } > + > + ret = spi_read(adc->spi, &adc->buffer, 2); > + > + mutex_unlock(&adc->lock); > + > + if (ret < 0) > + return ret; > + > + return ((adc->buffer[0] << 8 | adc->buffer[1]) & 0xFFF); > +} > + > +static int adc128_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *channel, int *val, > + int *val2, long mask) > +{ > + struct adc128 *adc = iio_priv(indio_dev); > + int ret; > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + > + ret = adc128_adc_conversion(adc, channel->channel); > + if (ret < 0) > + return -EINVAL; > + > + *val = ret; > + return IIO_VAL_INT; > + > + case IIO_CHAN_INFO_SCALE: > + > + ret = regulator_get_voltage(adc->reg); > + if (ret < 0) > + return -EINVAL; > + > + *val = ret / 1000; > + *val2 = 12; > + return IIO_VAL_FRACTIONAL_LOG2; > + > + default: > + return -EINVAL; > + } > + > +} > + > +#define ADC128_VOLTAGE_CHANNEL(num) \ > + { \ > + .type = IIO_VOLTAGE, \ > + .indexed = 1, \ > + .channel = (num), \ > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ > + } > + > +static const struct iio_chan_spec adc128_channels[] = { > + ADC128_VOLTAGE_CHANNEL(0), > + ADC128_VOLTAGE_CHANNEL(1), > + ADC128_VOLTAGE_CHANNEL(2), > + ADC128_VOLTAGE_CHANNEL(3), > + ADC128_VOLTAGE_CHANNEL(4), > + ADC128_VOLTAGE_CHANNEL(5), > + ADC128_VOLTAGE_CHANNEL(6), > + ADC128_VOLTAGE_CHANNEL(7), > +}; > + > +static const struct iio_info adc128_info = { > + .read_raw = adc128_read_raw, > + .driver_module = THIS_MODULE, > +}; > + > +static int adc128_probe(struct spi_device *spi) > +{ > + struct iio_dev *indio_dev; > + struct adc128 *adc; > + int ret; > + > + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc)); > + if (!indio_dev) > + return -ENOMEM; > + > + adc = iio_priv(indio_dev); > + adc->spi = spi; > + |spi_set_drvdata(spi, indio_dev); should be somewhere around here. | > + indio_dev->dev.parent = &spi->dev; > + indio_dev->name = spi_get_device_id(spi)->name; > + indio_dev->modes = INDIO_DIRECT_MODE; > + indio_dev->info = &adc128_info; > + > + indio_dev->channels = adc128_channels; > + indio_dev->num_channels = ARRAY_SIZE(adc128_channels); > + > + adc->reg = devm_regulator_get(&spi->dev, "vref"); > + if (IS_ERR(adc->reg)) > + return PTR_ERR(adc->reg); > + > + ret = regulator_enable(adc->reg); > + if (ret < 0) > + return ret; > + > + mutex_init(&adc->lock); > + > + ret = iio_device_register(indio_dev); > + > + return ret; > +} > + > +static int adc128_remove(struct spi_device *spi) > +{ > + struct iio_dev *indio_dev = spi_get_drvdata(spi); > + struct adc128 *adc = iio_priv(indio_dev); > + > + iio_device_unregister(indio_dev); > + regulator_disable(adc->reg); > + > + return 0; > +} > + > +static const struct spi_device_id adc128_id[] = { > + { "adc128s052", 0}, > + { } > +}; > +MODULE_DEVICE_TABLE(spi, adc128_id); > + > +static struct spi_driver adc128_driver = { > + .driver = { > + .name = "adc128s052", > + .owner = THIS_MODULE, > + }, > + .probe = adc128_probe, > + .remove = adc128_remove, > + .id_table = adc128_id, > +}; > +module_spi_driver(adc128_driver); > + > +MODULE_AUTHOR("Angelo Compagnucci <angelo.compagnucci@xxxxxxxxx>"); > +MODULE_DESCRIPTION("Texas Instruments ADC128S052"); > +MODULE_LICENSE("GPL v2"); -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
