v1: - Runtime PM: Removed module parameter for delay configuration Use RTPM autosuspend delay feature. This allows sysfs configuration of autosuspend time. - Trigger As suggested, there are two triggers: - data_ready : Trigger which will allow all gyro periodic sampled data to be received by user space - any-motion: When used, will configure the chipset so that data is pushed only when there is any motion, allowing system to enter deeper idle power states - Events ROC type events will send direction instead of either. Also both events and data triggers can be enabled together. - Addition of unbuffered TEMP read interface - Misc error message corrections as suggested by Peter Meerwald TBD: Add sysfs attribute to trigger to configure thresholds. Currently the triggers don't have feature to add sysfs attributes unlike IIO device. But this has to be a RFC patch on top. v0: Base version for review Srinivas Pandruvada (1): iio:gyro:bmg160 Gyro Sensor driver drivers/iio/gyro/Kconfig | 11 + drivers/iio/gyro/Makefile | 1 + drivers/iio/gyro/bmg160.c | 1132 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1144 insertions(+) create mode 100644 drivers/iio/gyro/bmg160.c -- 1.7.11.7 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
