Hi Arnd, On 07/18/2014 06:47 PM, Arnd Bergmann wrote: > On Friday 18 July 2014 14:59:44 Chanwoo Choi wrote: >> This patch control special clock for ADC in Exynos series's FSYS block. >> If special clock of ADC is registerd on clock list of common clk framework, >> Exynos ADC drvier have to control this clock. >> >> Exynos3250/Exynos4/Exynos5 has 'adc' clock as following: >> - 'adc' clock: bus clock for ADC >> >> Exynos3250 has additional 'sclk_adc' clock as following: >> - 'sclk_adc' clock: special clock for ADC which provide clock to internal ADC >> >> Exynos 4210/4212/4412 and Exynos5250/5420 has not included 'sclk_adc' clock >> in FSYS_BLK. But, Exynos3250 based on Cortex-A7 has only included 'sclk_adc' >> clock in FSYS_BLK. > > Do you know if any of the older ADC blocks have an "sclk" input as well? No, I didn't check older ADC blocks. I only checked it on Exynos3250, Exynos4210/4212/4412, Exynos5250/5420. > > Further, why is it called "sclk_adc" rather than just "sclk"? The sclk means 'special clock' in Exynos TRM. Exynos SoC has varisou sclk clocks. 'sclk_adc' is only used for ADC IP. > >> @@ -199,13 +262,20 @@ static void exynos_adc_v2_start_conv(struct exynos_adc *info, >> writel(con1 | ADC_CON_EN_START, ADC_V2_CON1(info->regs)); >> } >> >> +#define __EXYNOS_ADC_V2_DATA \ >> + .num_channels = MAX_ADC_V2_CHANNELS, \ >> + .init_hw = exynos_adc_v2_init_hw, \ >> + .exit_hw = exynos_adc_v2_exit_hw, \ >> + .clear_irq = exynos_adc_v2_clear_irq, \ >> + .start_conv = exynos_adc_v2_start_conv, \ >> + >> static struct exynos_adc_data const exynos_adc_v2_data = { >> - .num_channels = MAX_ADC_V2_CHANNELS, >> + __EXYNOS_ADC_V2_DATA >> +}; >> >> - .init_hw = exynos_adc_v2_init_hw, >> - .exit_hw = exynos_adc_v2_exit_hw, >> - .clear_irq = exynos_adc_v2_clear_irq, >> - .start_conv = exynos_adc_v2_start_conv, >> +static struct exynos_adc_data const exynos3250_adc_v2_data = { >> + __EXYNOS_ADC_V2_DATA >> + .needs_sclk = true, >> }; > > I think the macro hurts readability. Please just duplicate the definition > here. OK, I'll fix it. > >> static const struct of_device_id exynos_adc_match[] = { >> @@ -215,6 +285,9 @@ static const struct of_device_id exynos_adc_match[] = { >> }, { >> .compatible = "samsung,exynos-adc-v2", >> .data = (void *)&exynos_adc_v2_data, >> + }, { >> + .compatible = "samsung,exynos3250-adc-v2", >> + .data = (void *)&exynos3250_adc_v2_data, >> }, >> {}, > > Remove the '(void *)' cast here and mark the structure as 'const'. > We intentionally use a 'const void *' type here to verify that > the driver doesn't modify the per-device type data at runtime, > which would be bad if you ever have multiple device instances. OK, I'll remove it. Thanks, Chanwoo Choi -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html