This adds some basic, simple device tree bindings to the STMicro MEMS sensor drivers. Cc: devicetree@xxxxxxxxxxxxxxx Cc: Lee Jones <lee.jones@xxxxxxxxxx> Cc: Denis CIOCCA <denis.ciocca@xxxxxx> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- .../devicetree/bindings/iio/st-sensors.txt | 54 ++++++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/st-sensors.txt diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt new file mode 100644 index 000000000000..a7a0a15913ad --- /dev/null +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt @@ -0,0 +1,54 @@ +STMicroelectronics MEMS sensors + +The STMicroelectronics sensor devices are pretty straight-forward I2C or +SPI devices, all sharing the same device tree descriptions no matter what +type of sensor it is. + +Required properties: +- compatible: see the list of valid compatible strings below +- reg: the I2C or SPI address the device will respond to + +Optional properties: +- vdd-supply: an optional regulator that needs to be on to provide VDD + power to the sensor. +- vddio-supply: an optional regulator that needs to be on to provide the + VDD IO power to the sensor. +- st,drdy-int-pin: the pin on the package that will be used to signal + "data ready" (valid values: 1 or 2). This property is not configurable + on all sensors. + +Sensors may also have applicable pin control settings, those use the +standard bindings from pinctrl/pinctrl-bindings.txt. + +Valid compatible strings: + +Accelerometers: +- st,lsm303dlh-accel +- st,lsm303dlhc-accel +- st,lis3dh-accel +- st,lsm330d-accel +- st,lsm330dl-accel +- st,lsm330dlc-accel +- st,lis331dlh-accel +- st,lsm303dl-accel +- st,lsm303dlm-accel +- st,lsm330-accel + +Gyroscopes: +- st,l3g4200d-gyro +- st,lsm330d-gyro +- st,lsm330dl-gyro +- st,lsm330dlc-gyro +- st,l3gd20-gyro +- st,l3g4is-gyro +- st,lsm330-gyro + +Magnetometers: +- st,lsm303dlhc-magn +- st,lsm303dlm-magn +- st,lis3mdl-magn + +Pressure sensors: +- st,lps001wp-press +- st,lps25h-press +- st,lps331ap-press -- 1.9.0 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
