On March 26, 2014 4:18:43 PM GMT+00:00, Peter Meerwald <pmeerw@xxxxxxxxxx> wrote:
>
>> For one time read, let's not create a new dummy device, Just assign
>> client->addr or try to use
>> i2c_transfer(), where you can specify address.
>
>i2c_transfer() looks good
Its a dirty hack. We really want to handle this in the i2c core...
>
>p.
>
>> > ----- Original Message ----- From: "Peter Meerwald"
><pmeerw@xxxxxxxxxx>
>> > To: "Kevin Tsai" <ktsai@xxxxxxxxxxxxxxxx>
>> > Cc: "Jonathan Cameron" <jic23@xxxxxxxxxx>;
><linux-iio@xxxxxxxxxxxxxxx>
>> > Sent: Tuesday, March 25, 2014 16:39
>> > Subject: Re: [PATCH V3 1/1] iio: add Capella cm3218x ambient light
>sensor
>> > driver.
>> >
>> >
>> > >
>> > > > Add Capella Microsystem CM3218X family Ambient Light Sensor IIO
>driver.
>> > > > This driver will convert raw data to lux value. Default
>parameters are
>> > > > for reference only. It will detect ACPI table to load
>per-system
>> > > > manufacturing
>> > > > parameters.
>> > > >
>> > > > V2: Follow Jonathan Cameron's advise to separate device id.
>> > > > Also, follow Peter Meerwald's advise to correct whitespace,
>prefix, and,
>> > > > comments.
>> > > >
>> > > > V3: Follow Peter Meerwald's advise to create a separated
>i2c_client
>> > > > handler to
>> > > > access SMBus ARA register.
>> > >
>> > > couple of minor comments...
>> > >
>> > > > Signed-off-by: Kevin Tsai <ktsai@xxxxxxxxxxxxxxxx>
>> > > > ---
>> > > > .../devicetree/bindings/i2c/trivial-devices.txt | 1 +
>> > > > drivers/iio/light/Kconfig | 11 +
>> > > > drivers/iio/light/Makefile | 1 +
>> > > > drivers/iio/light/cm3218x.c | 745
>> > > > +++++++++++++++++++++
>> > > > 4 files changed, 758 insertions(+)
>> > > > create mode 100644 drivers/iio/light/cm3218x.c
>> > > >
>> > > > diff --git
>a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
>> > > > b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
>> > > > index 1a1ac2e..c3c869b 100644
>> > > > --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
>> > > > +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
>> > > > @@ -17,6 +17,7 @@ at,24c08 i2c serial eeprom (24cxx)
>> > > > atmel,24c02 i2c serial eeprom (24cxx)
>> > > > atmel,at97sc3204t i2c trusted platform module (TPM)
>> > > > capella,cm32181 CM32181: Ambient Light Sensor
>> > > > +capella,cm3218x CM3218X: Ambient Light Sensor
>> > > > catalyst,24c32 i2c serial eeprom
>> > > > dallas,ds1307 64 x 8, Serial, I2C Real-Time Clock
>> > > > dallas,ds1338 I2C RTC with 56-Byte NV RAM
>> > > > diff --git a/drivers/iio/light/Kconfig
>b/drivers/iio/light/Kconfig
>> > > > index d12b2a0..97a341a 100644
>> > > > --- a/drivers/iio/light/Kconfig
>> > > > +++ b/drivers/iio/light/Kconfig
>> > > > @@ -38,6 +38,17 @@ config CM32181
>> > > > To compile this driver as a module, choose M here:
>> > > > the module will be called cm32181.
>> > > >
>> > > > +config CM3218X
>> > > > + depends on I2C
>> > >
>> > > depends on I2C && ACPI ???
>> > >
>> > > > + tristate "CM3218X driver"
>> > > > + help
>> > > > + Say Y here if you use cm3218x.
>> > > > + This option enables ambient light sensor using
>> > > > + Capella cm3218x device driver.
>> > > > +
>> > > > + To compile this driver as a module, choose M here:
>> > > > + the module will be called cm3218x.
>> > > > +
>> > > > config CM36651
>> > > > depends on I2C
>> > > > tristate "CM36651 driver"
>> > > > diff --git a/drivers/iio/light/Makefile
>b/drivers/iio/light/Makefile
>> > > > index 60e35ac..a506c23 100644
>> > > > --- a/drivers/iio/light/Makefile
>> > > > +++ b/drivers/iio/light/Makefile
>> > > > @@ -6,6 +6,7 @@
>> > > > obj-$(CONFIG_ADJD_S311) += adjd_s311.o
>> > > > obj-$(CONFIG_APDS9300) += apds9300.o
>> > > > obj-$(CONFIG_CM32181) += cm32181.o
>> > > > +obj-$(CONFIG_CM3218X) += cm3218x.o
>> > > > obj-$(CONFIG_CM36651) += cm36651.o
>> > > > obj-$(CONFIG_GP2AP020A00F) += gp2ap020a00f.o
>> > > > obj-$(CONFIG_HID_SENSOR_ALS) += hid-sensor-als.o
>> > > > diff --git a/drivers/iio/light/cm3218x.c
>b/drivers/iio/light/cm3218x.c
>> > > > new file mode 100644
>> > > > index 0000000..efd0d0a
>> > > > --- /dev/null
>> > > > +++ b/drivers/iio/light/cm3218x.c
>> > > > @@ -0,0 +1,745 @@
>> > > > +/*
>> > > > + * Copyright (C) 2014 Capella Microsystems Inc.
>> > > > + * Author: Kevin Tsai <ktsai@xxxxxxxxxxxxxxxx>
>> > > > + *
>> > > > + * This program is free software; you can redistribute it
>and/or modify
>> > > > it
>> > > > + * under the terms of the GNU General Public License version
>2, as
>> > > > published
>> > > > + * by the Free Software Foundation.
>> > > > + *
>> > > > + * Special thanks Srinivas Pandruvada
>> > > > <srinivas.pandruvada@xxxxxxxxxxxxxxx>
>> > > > + * help to add ACPI support.
>> > > > + *
>> > > > + */
>> > > > +
>> > > > +#include <linux/delay.h>
>> > > > +#include <linux/err.h>
>> > > > +#include <linux/i2c.h>
>> > > > +#include <linux/mutex.h>
>> > > > +#include <linux/module.h>
>> > > > +#include <linux/interrupt.h>
>> > > > +#include <linux/regulator/consumer.h>
>> > > > +#include <linux/iio/iio.h>
>> > > > +#include <linux/iio/sysfs.h>
>> > > > +#include <linux/iio/events.h>
>> > > > +#include <linux/init.h>
>> > > > +#include <linux/acpi.h>
>> > > > +
>> > > > +/* Registers Address */
>> > > > +#define CM3218X_REG_ADDR_CMD 0x00
>> > > > +#define CM3218X_REG_ADDR_WH 0x01
>> > > > +#define CM3218X_REG_ADDR_WL 0x02
>> > > > +#define CM3218X_REG_ADDR_TEST 0x03
>> > > > +#define CM3218X_REG_ADDR_ALS 0x04
>> > > > +#define CM3218X_REG_ADDR_STATUS 0x06
>> > > > +#define CM3218X_REG_ADDR_ID 0x07
>> > > > +
>> > > > +/* Number of Configurable Registers */
>> > > > +#define CM3218X_CONF_REG_NUM 16
>> > > > +
>> > > > +/* CMD register */
>> > > > +#define CM3218X_CMD_ALS_DISABLE BIT(0)
>> > > > +#define CM3218X_CMD_ALS_INT_EN BIT(1)
>> > > > +#define CM3218X_CMD_ALS_THRES_WINDOW BIT(2)
>> > > > +
>> > > > +#define CM3218X_CMD_ALS_PERS_SHIFT 4
>> > > > +#define CM3218X_CMD_ALS_PERS_MASK (0x03 <<
>CM3218X_CMD_ALS_PERS_SHIFT)
>> > > > +#define CM3218X_CMD_ALS_PERS_DEFAULT (0x01 <<
>> > > > CM3218X_CMD_ALS_PERS_SHIFT)
>> > > > +
>> > > > +#define CM3218X_CMD_ALS_IT_SHIFT 6
>> > > > +#define CM3218X_CMD_ALS_IT_MASK (0x0F <<
>CM3218X_CMD_ALS_IT_SHIFT)
>> > > > +#define CM3218X_CMD_ALS_IT_DEFAULT (0x01 <<
>CM3218X_CMD_ALS_IT_SHIFT)
>> > > > +
>> > > > +#define CM3218X_CMD_ALS_HS_SHIFT 11
>> > > > +#define CM3218X_CMD_ALS_HS_MASK (0x01 <<
>CM3218X_CMD_ALS_HS_SHIFT)
>> > > > +#define CM3218X_CMD_ALS_HS_DEFAULT (0x00 <<
>CM3218X_CMD_ALS_HS_SHIFT)
>> > > > +
>> > > > +#define CM3218X_CMD_DEFAULT (CM3218X_CMD_ALS_THRES_WINDOW |\
>> > > > + CM3218X_CMD_ALS_PERS_DEFAULT |\
>> > > > + CM3218X_CMD_ALS_IT_DEFAULT |\
>> > > > + CM3218X_CMD_ALS_HS_DEFAULT)
>> > > > +
>> > > > +#define CM3218X_WH_DEFAULT 0xFFFF
>> > > > +#define CM3218X_WL_DEFAULT 0x0000
>> > > > +
>> > > > +#define CM3218X_CALIBSCALE_DEFAULT 100000
>> > > > +#define CM3218X_CALIBSCALE_RESOLUTION 100000
>> > > > +#define CM3218X_MLUX_PER_LUX 1000
>> > > > +#define CM3218X_THRESHOLD_PERCENT 10 /* 10 percent */
>> > > > +
>> > > > +#define CM3218X_ARA 0x0C
>> > > > +
>> > > > +/* CM3218X family */
>> > > > +enum {
>> > > > + cm3218,
>> > > > + cm32181,
>> > > > + cm32182
>> > > > +};
>> > > > +
>> > > > +/* CM3218 Family */
>> > > > +#define CM3218_MLUX_PER_BIT_DEFAULT 5 /* Depend on system */
>> > > > +#define CM3218_MLUX_PER_BIT_BASE_IT 800000
>> > > > +static const int CM3218_als_it_bits[] = {0, 1, 2, 3};
>> > > > +static const int CM3218_als_it_values[] = {100000, 200000,
>400000,
>> > > > 800000};
>> > > > +
>> > > > +/* CM32181 Family */
>> > > > +#define CM32181_MLUX_PER_BIT_DEFAULT 5
>> > > > +#define CM32181_MLUX_PER_BIT_BASE_IT 800000
>> > > > +static const int CM32181_als_it_bits[] = {12, 8, 0, 1, 2, 3};
>> > > > +static const int CM32181_als_it_values[] = {
>> > > > + 25000, 50000, 100000, 200000, 400000, 800000};
>> > > > +
>> > > > +struct cm3218x_als_info {
>> > > > + u32 id;
>> > > > + int int_type;
>> > > > +#define CM3218X_INT_TYPE_SMBUS 0
>> > > > +#define CM3218X_INT_TYPE_I2C 1
>> > > > + int regs_bmp;
>> > > > + int calibscale;
>> > > > + int mlux_per_bit;
>> > > > + int mlux_per_bit_base_it;
>> > > > + const int *als_it_bits;
>> > > > + const int *als_it_values;
>> > > > + int num_als_it;
>> > > > + int als_raw;
>> > > > +};
>> > > > +
>> > > > +static struct cm3218x_als_info cm3218_info = {
>> > > > + 3218, CM3218X_INT_TYPE_SMBUS, 0x0F,
>CM3218X_CALIBSCALE_DEFAULT,
>> > > > + CM3218_MLUX_PER_BIT_DEFAULT, CM3218_MLUX_PER_BIT_BASE_IT,
>> > > > + CM3218_als_it_bits, CM3218_als_it_values,
>> > > > + ARRAY_SIZE(CM3218_als_it_bits), 0};
>> > >
>> > > const?
>> > >
>> > > > +
>> > > > +static struct cm3218x_als_info cm32181_info = {
>> > > > + 32181, CM3218X_INT_TYPE_I2C, 0x0F,
>CM3218X_CALIBSCALE_DEFAULT,
>> > > > + CM32181_MLUX_PER_BIT_DEFAULT, CM32181_MLUX_PER_BIT_BASE_IT,
>> > > > + CM32181_als_it_bits, CM32181_als_it_values,
>> > > > + ARRAY_SIZE(CM32181_als_it_bits), 0};
>> > > > +
>> > > > +static struct cm3218x_als_info cm32182_info = {
>> > > > + 32182, CM3218X_INT_TYPE_I2C, 0x0F,
>CM3218X_CALIBSCALE_DEFAULT,
>> > > > + CM32181_MLUX_PER_BIT_DEFAULT, CM32181_MLUX_PER_BIT_BASE_IT,
>> > > > + CM32181_als_it_bits, CM32181_als_it_values,
>> > > > + ARRAY_SIZE(CM32181_als_it_bits), 0};
>> > > > +
>> > > > +struct cm3218x_chip {
>> > > > + struct i2c_client *client;
>> > > > + struct i2c_client *ara;
>> > > > + struct mutex lock;
>> > > > + u16 conf_regs[CM3218X_CONF_REG_NUM];
>> > > > + struct cm3218x_als_info *als_info;
>> > > > +};
>> > > > +
>> > > > +static int cm3218x_get_lux(struct cm3218x_chip *chip);
>> > > > +static int cm3218x_threshold_update(struct cm3218x_chip *chip,
>int
>> > > > percent);
>> > > > +static int cm3218x_read_als_it(struct cm3218x_chip *chip, int
>*val2);
>> > > > +
>> > > > +/**
>> > > > + * cm3218x_interrupt_config() - Enable/Disable CM3218X
>interrupt
>> > > > + * @chip: pointer of struct cm3218x.
>> > > > + * @enable: 0 to disable; otherwise to enable
>> > > > + *
>> > > > + * Config CM3218X interrupt control bit.
>> > > > + *
>> > > > + * Return: 0 for success; otherwise for error code.
>> > > > + */
>> > > > +static int cm3218x_interrupt_config(struct cm3218x_chip *chip,
>int
>> > > > enable)
>> > > > +{
>> > > > + struct i2c_client *client = chip->client;
>> > > > + struct cm3218x_als_info *als_info = chip->als_info;
>> > > > + int status;
>> > > > +
>> > > > + if (!als_info)
>> > > > + return -ENODEV;
>> > > > +
>> > > > + /* Force to clean interrupt */
>> > > > + if (als_info->int_type == CM3218X_INT_TYPE_I2C) {
>> > > > + status = i2c_smbus_read_word_data(client,
>> > > > + CM3218X_REG_ADDR_STATUS);
>> > > > + if (status < 0)
>> > > > + als_info->int_type = CM3218X_INT_TYPE_SMBUS;
>> > > > + }
>> > > > + if (chip->ara && als_info->int_type ==
>CM3218X_INT_TYPE_SMBUS)
>> > > > + i2c_smbus_read_byte(chip->ara);
>> > > > +
>> > > > + if (enable)
>> > > > + chip->conf_regs[CM3218X_REG_ADDR_CMD] |=
>> > > > + CM3218X_CMD_ALS_INT_EN;
>> > > > + else
>> > > > + chip->conf_regs[CM3218X_REG_ADDR_CMD] &=
>> > > > + ~CM3218X_CMD_ALS_INT_EN;
>> > > > +
>> > > > + status = i2c_smbus_write_word_data(client,
>CM3218X_REG_ADDR_CMD,
>> > > > + chip->conf_regs[CM3218X_REG_ADDR_CMD]);
>> > > > +
>> > > > + if (status < 0)
>> > > > + return -ENODEV;
>> > > > +
>> > > > + return status;
>> > > > +}
>> > > > +
>> > > > +/**
>> > > > + * cm3218x_acpi_get_cpm_info() - Get CPM object from ACPI
>> > > > + * @client pointer of struct i2c_client.
>> > > > + * @obj_name pointer of ACPI object name.
>> > > > + * @count maximum size of return array.
>> > > > + * @vals pointer of array for return elements.
>> > > > + *
>> > > > + * Convert ACPI CPM table to array. Special thanks Srinivas
>> > > > Pandruvada's
>> > > > + * help to implement this routine.
>> > > > + *
>> > > > + * Return: -ENODEV for fail. Otherwise is number of elements.
>> > > > + */
>> > > > +static int cm3218x_acpi_get_cpm_info(struct i2c_client
>*client, char
>> > > > *obj_name,
>> > > > + int count, u64 *vals)
>> > > > +{
>> > > > + acpi_handle handle;
>> > > > + struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
>> > > > + int i;
>> > > > + acpi_status status;
>> > > > + union acpi_object *cpm;
>> > > > +
>> > > > + handle = ACPI_HANDLE(&client->dev);
>> > > > + if (!handle)
>> > > > + return -ENODEV;
>> > > > +
>> > > > + status = acpi_evaluate_object(handle, obj_name, NULL,
>&buffer);
>> > > > + if (ACPI_FAILURE(status)) {
>> > > > + dev_err(&client->dev, "object %s not found\n", obj_name);
>> > > > + return -ENODEV;
>> > > > + }
>> > > > +
>> > > > + cpm = buffer.pointer;
>> > > > + for (i = 0; i < cpm->package.count && i < count; ++i) {
>> > > > + union acpi_object *elem;
>> > > > + elem = &(cpm->package.elements[i]);
>> > > > + vals[i] = elem->integer.value;
>> > > > + }
>> > > > +
>> > > > + kfree(buffer.pointer);
>> > > > +
>> > > > + return cpm->package.count;
>> > > > +}
>> > > > +
>> > > > +/**
>> > > > + * cm3218x_reg_init() - Initialize CM3218X registers
>> > > > + * @chip: pointer of struct cm3218x.
>> > > > + *
>> > > > + * Initialize CM3218X ambient light sensor register to default
>values.
>> > > > + *
>> > > > + Return: 0 for success; otherwise for error code.
>> > > > + */
>> > > > +static int cm3218x_reg_init(struct cm3218x_chip *chip)
>> > > > +{
>> > > > + struct i2c_client *client = chip->client;
>> > > > + int i;
>> > > > + s32 ret;
>> > > > + int cpm_elem_count;
>> > > > + u64 cpm_elems[20];
>> > > > + struct cm3218x_als_info *als_info;
>> > > > +
>> > > > + /* Default device */
>> > > > + chip->als_info = &cm3218_info;
>> > > > + chip->conf_regs[CM3218X_REG_ADDR_CMD] = CM3218X_CMD_DEFAULT;
>> > > > + chip->conf_regs[CM3218X_REG_ADDR_WH] = CM3218X_WH_DEFAULT;
>> > > > + chip->conf_regs[CM3218X_REG_ADDR_WL] = CM3218X_WL_DEFAULT;
>> > > > +
>> > > > + /* Disable interrupt */
>> > > > + cm3218x_interrupt_config(chip, 0);
>> > > > +
>> > > > + /* Disable Test Mode */
>> > > > + i2c_smbus_write_word_data(client, CM3218X_REG_ADDR_TEST,
>0x0000);
>> > > > +
>> > > > + /* Disable device */
>> > > > + i2c_smbus_write_word_data(client, CM3218X_REG_ADDR_CMD,
>> > > > + CM3218X_CMD_ALS_DISABLE);
>> > > > +
>> > > > + /* Identify device */
>> > > > + ret = i2c_smbus_read_word_data(client, CM3218X_REG_ADDR_ID);
>> > > > + if (ret < 0)
>> > > > + return ret;
>> > > > + switch (ret & 0xFF) {
>> > > > + case 0x18:
>> > > > + als_info = chip->als_info = &cm3218_info;
>> > > > + if (ret & 0x0800)
>> > > > + als_info->int_type = CM3218X_INT_TYPE_I2C;
>> > > > + else
>> > > > + als_info->int_type = CM3218X_INT_TYPE_SMBUS;
>> > > > + break;
>> > > > + case 0x81:
>> > > > + als_info = chip->als_info = &cm32181_info;
>> > > > + break;
>> > > > + case 0x82:
>> > > > + als_info = chip->als_info = &cm32182_info;
>> > > > + break;
>> > > > + default:
>> > > > + return -ENODEV;
>> > > > + }
>> > > > +
>> > > > + if (ACPI_HANDLE(&client->dev)) {
>> > > > + /* Load from ACPI */
>> > > > + cpm_elem_count = cm3218x_acpi_get_cpm_info(client, "CPM0",
>> > > > + ARRAY_SIZE(cpm_elems),
>> > > > + cpm_elems);
>> > > > + if (cpm_elem_count > 0) {
>> > > > + int header_num = 3;
>> > > > + int reg_num = cpm_elem_count - header_num;
>> > > > +
>> > > > + als_info->regs_bmp = cpm_elems[2];
>> > > > + for (i = 0; i < reg_num; i++)
>> > > > + if (als_info->regs_bmp & (1<<i))
>> > > > + chip->conf_regs[i] =
>> > > > + cpm_elems[header_num+i];
>> > > > + }
>> > > > +
>> > > > + cpm_elem_count = cm3218x_acpi_get_cpm_info(client, "CPM1",
>> > > > + ARRAY_SIZE(cpm_elems),
>> > > > + cpm_elems);
>> > > > + if (cpm_elem_count > 0) {
>> > > > + als_info->mlux_per_bit = (int)cpm_elems[0] / 100;
>> > > > + als_info->calibscale = (int)cpm_elems[1];
>> > > > + }
>> > > > + }
>> > > > +
>> > > > + /* Force to disable interrupt */
>> > > > + chip->conf_regs[CM3218X_REG_ADDR_CMD] &=
>~CM3218X_CMD_ALS_INT_EN;
>> > > > +
>> > > > + /* Initialize registers */
>> > > > + for (i = 0; i < CM3218X_CONF_REG_NUM; i++) {
>> > > > + if (als_info->regs_bmp & (1<<i)) {
>> > > > + ret = i2c_smbus_write_word_data(client, i,
>> > > > + chip->conf_regs[i]);
>> > > > + if (ret < 0)
>> > > > + return ret;
>> > > > + }
>> > > > + }
>> > > > +
>> > > > + return 0;
>> > > > +}
>> > > > +
>> > > > +/**
>> > > > + * cm3218x_read_als_it() - Get sensor integration time (ms)
>> > > > + * @chip: pointer of struct cm3218x
>> > > > + * @val2: pointer of int to load the als_it value.
>> > > > + *
>> > > > + * Report the current integartion time in milliseconds.
>> > >
>> > > integration
>> > >
>> > > > + *
>> > > > + * Return: IIO_VAL_INT_PLUS_MICRO for success, otherwise
>-EINVAL.
>> > > > + */
>> > > > +static int cm3218x_read_als_it(struct cm3218x_chip *chip, int
>*val2)
>> > > > +{
>> > > > + struct cm3218x_als_info *als_info = chip->als_info;
>> > > > + u16 als_it;
>> > > > + int i;
>> > > > +
>> > > > + als_it = chip->conf_regs[CM3218X_REG_ADDR_CMD];
>> > > > + als_it &= CM3218X_CMD_ALS_IT_MASK;
>> > > > + als_it >>= CM3218X_CMD_ALS_IT_SHIFT;
>> > > > + for (i = 0; i < als_info->num_als_it; i++) {
>> > > > + if (als_it == als_info->als_it_bits[i]) {
>> > > > + *val2 = als_info->als_it_values[i];
>> > > > + return IIO_VAL_INT_PLUS_MICRO;
>> > > > + }
>> > > > + }
>> > > > +
>> > > > + return -EINVAL;
>> > > > +}
>> > > > +
>> > > > +/**
>> > > > + * cm3218x_write_als_it() - Write sensor integration time
>> > > > + * @chip: pointer of struct cm3218x.
>> > > > + * @val: integration time in milliseconds.
>> > > > + *
>> > > > + * Convert integration time (ms) to sensor value.
>> > > > + *
>> > > > + * Return: i2c_smbus_write_word_data command return value.
>> > > > + */
>> > > > +static int cm3218x_write_als_it(struct cm3218x_chip *chip, int
>val)
>> > > > +{
>> > > > + struct i2c_client *client = chip->client;
>> > > > + struct cm3218x_als_info *als_info = chip->als_info;
>> > > > + u16 als_it;
>> > > > + int ret, i;
>> > > > +
>> > > > + for (i = 0; i < als_info->num_als_it; i++)
>> > > > + if (val <= als_info->als_it_values[i])
>> > > > + break;
>> > > > + if (i >= als_info->num_als_it)
>> > > > + i = als_info->num_als_it - 1;
>> > > > +
>> > > > + als_it = als_info->als_it_bits[i];
>> > > > + als_it <<= CM3218X_CMD_ALS_IT_SHIFT;
>> > > > +
>> > > > + mutex_lock(&chip->lock);
>> > > > + chip->conf_regs[CM3218X_REG_ADDR_CMD] &=
>> > > > + ~CM3218X_CMD_ALS_IT_MASK;
>> > > > + chip->conf_regs[CM3218X_REG_ADDR_CMD] |=
>> > > > + als_it;
>> > > > + ret = i2c_smbus_write_word_data(client, CM3218X_REG_ADDR_CMD,
>> > > > + chip->conf_regs[CM3218X_REG_ADDR_CMD]);
>> > > > + mutex_unlock(&chip->lock);
>> > > > +
>> > > > + return ret;
>> > > > +}
>> > > > +
>> > > > +/**
>> > > > + * cm3218x_get_lux() - report current lux value
>> > > > + * @chip: pointer of struct cm3218x.
>> > > > + *
>> > > > + * Convert sensor raw data to lux. It depends on integration
>> > > > + * time and calibscale variable.
>> > > > + *
>> > > > + * Return: Positive value is lux, otherwise is error code.
>> > > > + */
>> > > > +static int cm3218x_get_lux(struct cm3218x_chip *chip)
>> > > > +{
>> > > > + struct i2c_client *client = chip->client;
>> > > > + struct cm3218x_als_info *als_info = chip->als_info;
>> > > > + int ret;
>> > > > + int als_it;
>> > > > + u64 tmp;
>> > > > +
>> > > > + /* Calculate mlux per bit based on als_it */
>> > > > + ret = cm3218x_read_als_it(chip, &als_it);
>> > > > + if (ret < 0)
>> > > > + return -EINVAL;
>> > > > + tmp = (__force u64)als_info->mlux_per_bit;
>> > > > + tmp *= als_info->mlux_per_bit_base_it;
>> > > > + tmp = div_u64(tmp, als_it);
>> > > > +
>> > > > + /* Get als_raw */
>> > > > + if (!(chip->conf_regs[CM3218X_REG_ADDR_CMD] &
>CM3218X_CMD_ALS_INT_EN))
>> > > > + als_info->als_raw = i2c_smbus_read_word_data(
>> > > > + client,
>> > > > + CM3218X_REG_ADDR_ALS);
>> > > > + if (als_info->als_raw < 0)
>> > > > + return als_info->als_raw;
>> > > > +
>> > > > + tmp *= als_info->als_raw;
>> > > > + tmp *= als_info->calibscale;
>> > > > + tmp = div_u64(tmp, CM3218X_CALIBSCALE_RESOLUTION);
>> > > > + tmp = div_u64(tmp, CM3218X_MLUX_PER_LUX);
>> > > > +
>> > > > + if (tmp > 0xFFFF)
>> > > > + tmp = 0xFFFF;
>> > > > +
>> > > > + return (int)tmp;
>> > > > +}
>> > > > +
>> > > > +static int cm3218x_read_raw(struct iio_dev *indio_dev,
>> > > > + struct iio_chan_spec const *chan,
>> > > > + int *val, int *val2, long mask)
>> > > > +{
>> > > > + struct cm3218x_chip *chip = iio_priv(indio_dev);
>> > > > + struct cm3218x_als_info *als_info = chip->als_info;
>> > > > + int ret;
>> > > > +
>> > > > + switch (mask) {
>> > > > + case IIO_CHAN_INFO_PROCESSED:
>> > > > + ret = cm3218x_get_lux(chip);
>> > > > + if (ret < 0)
>> > > > + return ret;
>> > > > + *val = ret;
>> > > > + return IIO_VAL_INT;
>> > > > + case IIO_CHAN_INFO_CALIBSCALE:
>> > > > + *val = als_info->calibscale;
>> > > > + return IIO_VAL_INT;
>> > > > + case IIO_CHAN_INFO_INT_TIME:
>> > > > + *val = 0;
>> > > > + ret = cm3218x_read_als_it(chip, val2);
>> > > > + return ret;
>> > > > + }
>> > > > +
>> > > > + return -EINVAL;
>> > > > +}
>> > > > +
>> > > > +static int cm3218x_write_raw(struct iio_dev *indio_dev,
>> > > > + struct iio_chan_spec const *chan,
>> > > > + int val, int val2, long mask)
>> > > > +{
>> > > > + struct cm3218x_chip *chip = iio_priv(indio_dev);
>> > > > + struct cm3218x_als_info *als_info = chip->als_info;
>> > > > + long ms;
>> > > > +
>> > > > + switch (mask) {
>> > > > + case IIO_CHAN_INFO_CALIBSCALE:
>> > > > + als_info->calibscale = val;
>> > > > + return val;
>> > > > + case IIO_CHAN_INFO_INT_TIME:
>> > > > + ms = val * 1000000 + val2;
>> > > > + return cm3218x_write_als_it(chip, (int)ms);
>> > > > + }
>> > > > +
>> > > > + return -EINVAL;
>> > > > +}
>> > > > +
>> > > > +/**
>> > > > + * cm3218x_get_it_available() - Get available ALS IT value
>> > > > + * @dev: pointer of struct device.
>> > > > + * @attr: pointer of struct device_attribute.
>> > > > + * @buf: pointer of return string buffer.
>> > > > + *
>> > > > + * Display the available integration time in milliseconds.
>> > > > + *
>> > > > + * Return: string length.
>> > > > + */
>> > > > +static ssize_t cm3218x_get_it_available(struct device *dev,
>> > > > + struct device_attribute *attr, char *buf)
>> > > > +{
>> > > > + struct cm3218x_chip *chip = iio_priv(dev_to_iio_dev(dev));
>> > > > + struct cm3218x_als_info *als_info = chip->als_info;
>> > > > + int i, len;
>> > > > +
>> > > > + for (i = 0, len = 0; i < als_info->num_als_it; i++)
>> > > > + len += scnprintf(buf + len, PAGE_SIZE - len, "%u.%06u ",
>> > > > + als_info->als_it_values[i]/1000000,
>> > > > + als_info->als_it_values[i]%1000000);
>> > > > + return len + scnprintf(buf + len, PAGE_SIZE - len, "\n");
>> > > > +}
>> > > > +
>> > > > +/**
>> > > > + * cm3218x_threshold_update() - Update the threshold
>registers.
>> > > > + * @chip: pointer of struct cm3218x_chip.
>> > > > + * @percent: +/- percent.
>> > > > + *
>> > > > + * Based on the current ALS value, tupdate the hi and low
>threshold
>> > > > registers.
>> > >
>> > > tupdate?
>> > >
>> > > > + *
>> > > > + * Return: 0 for success; otherwise for error code.
>> > > > + */
>> > > > +static int cm3218x_threshold_update(struct cm3218x_chip *chip,
>int
>> > > > percent)
>> > > > +{
>> > > > + struct i2c_client *client = chip->client;
>> > > > + struct cm3218x_als_info *als_info = chip->als_info;
>> > > > + int ret;
>> > > > + int wh, wl;
>> > > > +
>> > > > + ret = als_info->als_raw = i2c_smbus_read_word_data(client,
>> > > > + CM3218X_REG_ADDR_ALS);
>> > > > + if (ret < 0)
>> > > > + return ret;
>> > > > +
>> > > > + wh = wl = ret;
>> > > > + ret *= percent;
>> > > > + ret /= 100;
>> > > > + if (ret < 1)
>> > > > + ret = 1;
>> > > > + wh += ret;
>> > > > + wl -= ret;
>> > > > + if (wh > 65535)
>> > > > + wh = 65535;
>> > > > + if (wl < 0)
>> > > > + wl = 0;
>> > > > +
>> > > > + chip->conf_regs[CM3218X_REG_ADDR_WH] = wh;
>> > > > + ret = i2c_smbus_write_word_data(
>> > > > + client,
>> > > > + CM3218X_REG_ADDR_WH,
>> > > > + chip->conf_regs[CM3218X_REG_ADDR_WH]);
>> > > > + if (ret < 0)
>> > > > + return ret;
>> > > > +
>> > > > + chip->conf_regs[CM3218X_REG_ADDR_WL] = wl;
>> > > > + ret = i2c_smbus_write_word_data(
>> > > > + client,
>> > > > + CM3218X_REG_ADDR_WL,
>> > > > + chip->conf_regs[CM3218X_REG_ADDR_WL]);
>> > > > +
>> > > > + return ret;
>> > > > +}
>> > > > +
>> > > > +/**
>> > > > + * cm3218x_event_handler() - Interrupt handling routine.
>> > > > + * @irq: irq number.
>> > > > + * @private: pointer of void.
>> > > > + *
>> > > > + * Clean interrupt and reset threshold registers.
>> > > > + *
>> > > > + * Return: IRQ_HANDLED.
>> > > > + */
>> > > > +static irqreturn_t cm3218x_event_handler(int irq, void
>*private)
>> > > > +{
>> > > > + struct iio_dev *dev_info = private;
>> > > > + struct cm3218x_chip *chip = iio_priv(dev_info);
>> > > > + int ret;
>> > > > +
>> > > > + mutex_lock(&chip->lock);
>> > > > +
>> > > > + /* Disable interrupt */
>> > > > + ret = cm3218x_interrupt_config(chip, 0);
>> > > > + if (ret < 0)
>> > > > + goto error_handler_unlock;
>> > > > +
>> > > > + /* Update Hi/Lo windows */
>> > > > + ret = cm3218x_threshold_update(chip,
>CM3218X_THRESHOLD_PERCENT);
>> > > > + if (ret < 0)
>> > > > + goto error_handler_unlock;
>> > > > +
>> > > > + /* Enable interrupt */
>> > > > + ret = cm3218x_interrupt_config(chip, 1);
>> > >
>> > > no need to check ret value
>> > >
>> > > > + if (ret < 0)
>> > > > + goto error_handler_unlock;
>> > > > +
>> > > > +error_handler_unlock:
>> > > > + mutex_unlock(&chip->lock);
>> > > > + return IRQ_HANDLED;
>> > > > +}
>> > > > +
>> > > > +static const struct iio_chan_spec cm3218x_channels[] = {
>> > > > + {
>> > > > + .type = IIO_LIGHT,
>> > > > + .info_mask_separate =
>> > > > + BIT(IIO_CHAN_INFO_PROCESSED) |
>> > > > + BIT(IIO_CHAN_INFO_CALIBSCALE) |
>> > > > + BIT(IIO_CHAN_INFO_INT_TIME),
>> > > > + }
>> > > > +};
>> > > > +
>> > > > +static
>IIO_DEVICE_ATTR(in_illuminance_integration_time_available,
>> > > > + S_IRUGO, cm3218x_get_it_available, NULL, 0);
>> > > > +
>> > > > +static struct attribute *cm3218x_attributes[] = {
>> > > > +
>&iio_dev_attr_in_illuminance_integration_time_available.dev_attr.attr,
>> > > > + NULL,
>> > > > +};
>> > > > +
>> > > > +static const struct attribute_group cm3218x_attribute_group =
>{
>> > > > + .attrs = cm3218x_attributes
>> > > > +};
>> > > > +
>> > > > +static const struct iio_info cm3218x_info = {
>> > > > + .driver_module = THIS_MODULE,
>> > > > + .read_raw = &cm3218x_read_raw,
>> > > > + .write_raw = &cm3218x_write_raw,
>> > > > + .attrs = &cm3218x_attribute_group,
>> > > > +};
>> > > > +
>> > > > +static int cm3218x_probe(struct i2c_client *client,
>> > > > + const struct i2c_device_id *id)
>> > > > +{
>> > > > + struct cm3218x_chip *chip;
>> > > > + struct iio_dev *indio_dev;
>> > > > + int ret;
>> > > > +
>> > > > + indio_dev = devm_iio_device_alloc(&client->dev,
>sizeof(*chip));
>> > > > + if (!indio_dev) {
>> > > > + dev_err(&client->dev, "devm_iio_device_alloc failed\n");
>> > > > + return -ENOMEM;
>> > > > + }
>> > > > +
>> > > > + chip = iio_priv(indio_dev);
>> > > > + i2c_set_clientdata(client, indio_dev);
>> > > > + chip->client = client;
>> > > > + chip->ara = i2c_new_dummy(client->adapter, CM3218X_ARA);
>> > > > +
>> > >
>> > > there is no i2c_unregister_device(chip->ara) in the error path
>below; but
>> > > i2c_unregister_device(chip->ara) is called in _remove()
>> > >
>> > > > + mutex_init(&chip->lock);
>> > > > + indio_dev->dev.parent = &client->dev;
>> > > > + indio_dev->channels = cm3218x_channels;
>> > > > + indio_dev->num_channels = ARRAY_SIZE(cm3218x_channels);
>> > > > + indio_dev->info = &cm3218x_info;
>> > > > + if (id && id->name)
>> > > > + indio_dev->name = id->name;
>> > > > + else
>> > > > + indio_dev->name = (char *)dev_name(&client->dev);
>> > > > + indio_dev->modes = INDIO_DIRECT_MODE;
>> > > > +
>> > > > + ret = cm3218x_reg_init(chip);
>> > > > + if (ret) {
>> > > > + dev_err(&client->dev,
>> > > > + "%s: register init failed\n",
>> > > > + __func__);
>> > > > + return ret;
>> > > > + }
>> > > > +
>> > > > + if (client->irq) {
>> > > > + ret = request_threaded_irq(client->irq,
>> > > > + NULL,
>> > > > + cm3218x_event_handler,
>> > > > + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
>> > > > + "cm3218x_event",
>> > > > + indio_dev);
>> > > > +
>> > > > + if (ret < 0) {
>> > > > + dev_err(&client->dev, "irq request error %d\n",
>> > > > + -ret);
>> > > > + goto error_disable_int;
>> > > > + }
>> > > > + }
>> > > > +
>> > > > + ret = iio_device_register(indio_dev);
>> > > > + if (ret < 0) {
>> > > > + dev_err(&client->dev,
>> > > > + "%s: regist device failed\n",
>> > > > + __func__);
>> > > > + goto error_free_irq;
>> > > > + }
>> > > > +
>> > > > + if (client->irq) {
>> > > > + ret = cm3218x_threshold_update(chip,
>CM3218X_THRESHOLD_PERCENT);
>> > > > + if (ret < 0)
>> > > > + goto error_free_irq;
>> > > > +
>> > > > + ret = cm3218x_interrupt_config(chip, 1);
>> > > > + if (ret < 0)
>> > > > + goto error_free_irq;
>> > > > + }
>> > > > +
>> > > > + return 0;
>> > > > +
>> > > > +error_free_irq:
>> > > > + free_irq(client->irq, indio_dev);
>> > >
>> > > in _remove() free_irq() is only called when client->irq != 0
>> > >
>> > > > +error_disable_int:
>> > > > + cm3218x_interrupt_config(chip, 0);
>> > > > + return ret;
>> > > > +}
>> > > > +
>> > > > +static int cm3218x_remove(struct i2c_client *client)
>> > > > +{
>> > > > + struct iio_dev *indio_dev = i2c_get_clientdata(client);
>> > > > + struct cm3218x_chip *chip = iio_priv(indio_dev);
>> > > > +
>> > > > + cm3218x_interrupt_config(chip, 0);
>> > > > + if (chip->ara)
>> > > > + i2c_unregister_device(chip->ara);
>> > > > + if (client->irq)
>> > > > + free_irq(client->irq, indio_dev);
>> > > > + iio_device_unregister(indio_dev);
>> > > > + return 0;
>> > > > +}
>> > > > +
>> > > > +static const struct i2c_device_id cm3218x_id[] = {
>> > > > + { "cm3218", cm3218},
>> > > > + { "cm32181", cm32181},
>> > > > + { "cm32182", cm32182},
>> > > > + { }
>> > > > +};
>> > > > +
>> > > > +MODULE_DEVICE_TABLE(i2c, cm3218x_id);
>> > > > +
>> > > > +static const struct of_device_id cm3218x_of_match[] = {
>> > > > + { .compatible = "capella,cm3218" },
>> > > > + { }
>> > > > +};
>> > > > +
>> > > > +static const struct acpi_device_id cm3218x_acpi_match[] = {
>> > > > + { "CPLM3218", 0},
>> > > > + {},
>> > > > +};
>> > > > +
>> > > > +MODULE_DEVICE_TABLE(acpi, cm3218x_acpi_match);
>> > > > +
>> > > > +static struct i2c_driver cm3218x_driver = {
>> > > > + .driver = {
>> > > > + .name = "cm3218x",
>> > > > + .acpi_match_table = ACPI_PTR(cm3218x_acpi_match),
>> > > > + .of_match_table = of_match_ptr(cm3218x_of_match),
>> > > > + .owner = THIS_MODULE,
>> > > > + },
>> > > > + .id_table = cm3218x_id,
>> > > > + .probe = cm3218x_probe,
>> > > > + .remove = cm3218x_remove,
>> > > > +};
>> > > > +
>> > > > +module_i2c_driver(cm3218x_driver);
>> > > > +
>> > > > +MODULE_AUTHOR("Kevin Tsai <ktsai@xxxxxxxxxxxxxxxx>");
>> > > > +MODULE_DESCRIPTION("CM3218X ambient light sensor driver");
>> > > > +MODULE_LICENSE("GPL");
>> > > >
>> > >
>> > > --
>> > >
>> > > Peter Meerwald
>> > > +43-664-2444418 (mobile)
>> >
>> > --
>> > To unsubscribe from this list: send the line "unsubscribe
>linux-iio" in
>> > the body of a message to majordomo@xxxxxxxxxxxxxxx
>> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>> >
>>
--
Sent from my Android phone with K-9 Mail. Please excuse my brevity.
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
