Please separate the missing break fix into its own patch. That will want to go in as a fix. The tree it will go through is therefore different from the rest of this patch which
can take a slower path into the kernel tree.
Jonathan
On March 21, 2014 12:45:51 PM GMT+00:00, Jimmy Li <coder.liss@xxxxxxxxx> wrote:
>Signed-off-by: Jimmy Li<coder.liss@xxxxxxxxx>
>---
> drivers/staging/iio/accel/sca3000_core.c | 3 ++-
> drivers/staging/iio/adc/ad7192.c | 3 ++-
> drivers/staging/iio/adc/ad7606_core.c | 2 +-
> drivers/staging/iio/adc/ad7816.c | 6 +++---
> drivers/staging/iio/adc/mxs-lradc.c | 6 ++++--
> drivers/staging/iio/addac/adt7316.c | 3 +--
>drivers/staging/iio/frequency/ad5930.c | 23 +++++++++++++++--------
> drivers/staging/iio/frequency/ad9850.c | 2 +-
> drivers/staging/iio/light/isl29018.c | 10 ++++++----
> drivers/staging/iio/light/tsl2583.c | 2 +-
> drivers/staging/iio/light/tsl2x7x_core.c | 12 ++++++------
> drivers/staging/iio/meter/ade7854-i2c.c | 3 ++-
> drivers/staging/iio/resolver/ad2s1200.c | 1 +
> 13 files changed, 45 insertions(+), 31 deletions(-)
>
>diff --git a/drivers/staging/iio/accel/sca3000_core.c
>b/drivers/staging/iio/accel/sca3000_core.c
>index ed30e32..c099294 100644
>--- a/drivers/staging/iio/accel/sca3000_core.c
>+++ b/drivers/staging/iio/accel/sca3000_core.c
>@@ -506,7 +506,8 @@ static int sca3000_read_raw(struct iio_dev
>*indio_dev,
> mutex_unlock(&st->lock);
> return ret;
> }
>- *val = ((st->rx[0] & 0x3F) << 3) | ((st->rx[1] & 0xE0) >> 5);
>+ *val = ((st->rx[0] & 0x3F) << 3) |
>+ ((st->rx[1] & 0xE0) >> 5);
> }
> mutex_unlock(&st->lock);
> return IIO_VAL_INT;
>diff --git a/drivers/staging/iio/adc/ad7192.c
>b/drivers/staging/iio/adc/ad7192.c
>index 83bb44b..d1f9790 100644
>--- a/drivers/staging/iio/adc/ad7192.c
>+++ b/drivers/staging/iio/adc/ad7192.c
>@@ -223,7 +223,8 @@ static int ad7192_setup(struct ad7192_state *st,
> id &= AD7192_ID_MASK;
>
> if (id != st->devid)
>- dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X)\n", id);
>+ dev_warn(&st->sd.spi->dev,
>+ "device ID query failed (0x%X)\n", id);
>
> switch (pdata->clock_source_sel) {
> case AD7192_CLK_EXT_MCLK1_2:
>diff --git a/drivers/staging/iio/adc/ad7606_core.c
>b/drivers/staging/iio/adc/ad7606_core.c
>index f0f05f1..bf2c801 100644
>--- a/drivers/staging/iio/adc/ad7606_core.c
>+++ b/drivers/staging/iio/adc/ad7606_core.c
>@@ -140,7 +140,7 @@ static ssize_t ad7606_store_range(struct device
>*dev,
> return count;
> }
>
>-static IIO_DEVICE_ATTR(in_voltage_range, S_IRUGO | S_IWUSR, \
>+static IIO_DEVICE_ATTR(in_voltage_range, S_IRUGO | S_IWUSR,
> ad7606_show_range, ad7606_store_range, 0);
> static IIO_CONST_ATTR(in_voltage_range_available, "5000 10000");
>
>diff --git a/drivers/staging/iio/adc/ad7816.c
>b/drivers/staging/iio/adc/ad7816.c
>index 2369cf2..ec86c01 100644
>--- a/drivers/staging/iio/adc/ad7816.c
>+++ b/drivers/staging/iio/adc/ad7816.c
>@@ -153,7 +153,8 @@ static ssize_t ad7816_show_available_modes(struct
>device *dev,
> return sprintf(buf, "full\npower-save\n");
> }
>
>-static IIO_DEVICE_ATTR(available_modes, S_IRUGO,
>ad7816_show_available_modes, NULL, 0);
>+static IIO_DEVICE_ATTR(available_modes, S_IRUGO,
>+ ad7816_show_available_modes, NULL, 0);
>
> static ssize_t ad7816_show_channel(struct device *dev,
> struct device_attribute *attr,
>@@ -442,6 +443,5 @@ static struct spi_driver ad7816_driver = {
> module_spi_driver(ad7816_driver);
>
> MODULE_AUTHOR("Sonic Zhang <sonic.zhang@xxxxxxxxxx>");
>-MODULE_DESCRIPTION("Analog Devices AD7816/7/8 digital"
>- " temperature sensor driver");
>+MODULE_DESCRIPTION("Analog Devices AD7816/7/8 digital temperature
>sensor driver");
> MODULE_LICENSE("GPL v2");
>diff --git a/drivers/staging/iio/adc/mxs-lradc.c
>b/drivers/staging/iio/adc/mxs-lradc.c
>index 11fb952..84f7177 100644
>--- a/drivers/staging/iio/adc/mxs-lradc.c
>+++ b/drivers/staging/iio/adc/mxs-lradc.c
>@@ -462,7 +462,8 @@ static void mxs_lradc_setup_ts_channel(struct
>mxs_lradc *lradc, unsigned ch)
> * SoC's delay unit and start the conversion later
> * and automatically.
> */
>- mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(0) | /* don't trigger
>ADC */
>+ mxs_lradc_reg_wrt(lradc,
>+ LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */
> LRADC_DELAY_TRIGGER_DELAYS(1 << 3) | /* trigger DELAY unit#3 */
> LRADC_DELAY_KICK |
> LRADC_DELAY_DELAY(lradc->settling_delay),
>@@ -520,7 +521,8 @@ static void mxs_lradc_setup_ts_pressure(struct
>mxs_lradc *lradc, unsigned ch1,
> * SoC's delay unit and start the conversion later
> * and automatically.
> */
>- mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(0) | /* don't trigger
>ADC */
>+ mxs_lradc_reg_wrt(lradc,
>+ LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */
> LRADC_DELAY_TRIGGER_DELAYS(1 << 3) | /* trigger DELAY unit#3 */
> LRADC_DELAY_KICK |
> LRADC_DELAY_DELAY(lradc->settling_delay), LRADC_DELAY(2));
>diff --git a/drivers/staging/iio/addac/adt7316.c
>b/drivers/staging/iio/addac/adt7316.c
>index 9f0ebb3..2890f04 100644
>--- a/drivers/staging/iio/addac/adt7316.c
>+++ b/drivers/staging/iio/addac/adt7316.c
>@@ -2185,6 +2185,5 @@ int adt7316_probe(struct device *dev, struct
>adt7316_bus *bus,
> EXPORT_SYMBOL(adt7316_probe);
>
> MODULE_AUTHOR("Sonic Zhang <sonic.zhang@xxxxxxxxxx>");
>-MODULE_DESCRIPTION("Analog Devices ADT7316/7/8 and ADT7516/7/9
>digital"
>- " temperature sensor, ADC and DAC driver");
>+MODULE_DESCRIPTION("Analog Devices ADT7316/7/8 and ADT7516/7/9 digital
>temperature sensor, ADC and DAC driver");
> MODULE_LICENSE("GPL v2");
>diff --git a/drivers/staging/iio/frequency/ad5930.c
>b/drivers/staging/iio/frequency/ad5930.c
>index a4aeee6..cc6a8dc 100644
>--- a/drivers/staging/iio/frequency/ad5930.c
>+++ b/drivers/staging/iio/frequency/ad5930.c
>@@ -21,7 +21,7 @@
>
> #define DRV_NAME "ad5930"
>
>-#define value_mask (u16)0xf000
>+#define value_mask ((u16)0xf000)
> #define addr_shift 12
>
> /* Register format: 4 bits addr + 12 bits value */
>@@ -51,13 +51,20 @@ static ssize_t ad5930_set_parameter(struct device
>*dev,
> struct ad5930_state *st = iio_priv(idev);
>
> config->control = (config->control & ~value_mask);
>- config->incnum = (config->control & ~value_mask) | (1 << addr_shift);
>- config->frqdelt[0] = (config->control & ~value_mask) | (2 <<
>addr_shift);
>- config->frqdelt[1] = (config->control & ~value_mask) | 3 <<
>addr_shift;
>- config->incitvl = (config->control & ~value_mask) | 4 << addr_shift;
>- config->buritvl = (config->control & ~value_mask) | 8 << addr_shift;
>- config->strtfrq[0] = (config->control & ~value_mask) | 0xc <<
>addr_shift;
>- config->strtfrq[1] = (config->control & ~value_mask) | 0xd <<
>addr_shift;
>+ config->incnum = (config->control & ~value_mask) |
>+ (1 << addr_shift);
>+ config->frqdelt[0] = (config->control & ~value_mask) |
>+ (2 << addr_shift);
>+ config->frqdelt[1] = (config->control & ~value_mask) |
>+ (3 << addr_shift);
>+ config->incitvl = (config->control & ~value_mask) |
>+ (4 << addr_shift);
>+ config->buritvl = (config->control & ~value_mask) |
>+ (8 << addr_shift);
>+ config->strtfrq[0] = (config->control & ~value_mask) |
>+ (0xc << addr_shift);
>+ config->strtfrq[1] = (config->control & ~value_mask) |
>+ (0xd << addr_shift);
>
> xfer.len = len;
> xfer.tx_buf = config;
>diff --git a/drivers/staging/iio/frequency/ad9850.c
>b/drivers/staging/iio/frequency/ad9850.c
>index af877ff..6183670 100644
>--- a/drivers/staging/iio/frequency/ad9850.c
>+++ b/drivers/staging/iio/frequency/ad9850.c
>@@ -21,7 +21,7 @@
>
> #define DRV_NAME "ad9850"
>
>-#define value_mask (u16)0xf000
>+#define value_mask ((u16)0xf000)
> #define addr_shift 12
>
> /* Register format: 4 bits addr + 12 bits value */
>diff --git a/drivers/staging/iio/light/isl29018.c
>b/drivers/staging/iio/light/isl29018.c
>index 3660a43..b42c435 100644
>--- a/drivers/staging/iio/light/isl29018.c
>+++ b/drivers/staging/iio/light/isl29018.c
>@@ -479,8 +479,9 @@ static int isl29018_chip_init(struct isl29018_chip
>*chip)
> */
> status = regmap_write(chip->regmap, ISL29018_REG_TEST, 0x0);
> if (status < 0) {
>- dev_err(chip->dev, "Failed to clear isl29018 TEST reg."
>- "(%d)\n", status);
>+ dev_err(chip->dev,
>+ "Failed to clear isl29018 TEST reg.(%d)\n",
>+ status);
> return status;
> }
>
>@@ -490,8 +491,9 @@ static int isl29018_chip_init(struct isl29018_chip
>*chip)
> */
> status = regmap_write(chip->regmap, ISL29018_REG_ADD_COMMAND1, 0);
> if (status < 0) {
>- dev_err(chip->dev, "Failed to clear isl29018 CMD1 reg."
>- "(%d)\n", status);
>+ dev_err(chip->dev,
>+ "Failed to clear isl29018 CMD1 reg.(%d)\n",
>+ status);
> return status;
> }
>
>diff --git a/drivers/staging/iio/light/tsl2583.c
>b/drivers/staging/iio/light/tsl2583.c
>index 0a60def..57dcd55 100644
>--- a/drivers/staging/iio/light/tsl2583.c
>+++ b/drivers/staging/iio/light/tsl2583.c
>@@ -787,7 +787,7 @@ static struct attribute_group
>tsl2583_attribute_group = {
> /* Use the default register values to identify the Taos device */
> static int taos_tsl258x_device(unsigned char *bufp)
> {
>- return ((bufp[TSL258X_CHIPID] & 0xf0) == 0x90);
>+ return (bufp[TSL258X_CHIPID] & 0xf0) == 0x90;
> }
>
> static const struct iio_info tsl2583_info = {
>diff --git a/drivers/staging/iio/light/tsl2x7x_core.c
>b/drivers/staging/iio/light/tsl2x7x_core.c
>index 9e0f2a9..f1cce3a 100644
>--- a/drivers/staging/iio/light/tsl2x7x_core.c
>+++ b/drivers/staging/iio/light/tsl2x7x_core.c
>@@ -1569,8 +1569,8 @@ static struct attribute
>*tsl2x7x_ALS_device_attrs[] = {
> &dev_attr_power_state.attr,
> &dev_attr_in_illuminance0_calibscale_available.attr,
> &dev_attr_in_illuminance0_integration_time.attr,
>- &iio_const_attr_in_illuminance0_integration_time_available\
>- .dev_attr.attr,
>+ &iio_const_attr_in_illuminance0_integration_time_available
>+ .dev_attr.attr,
> &dev_attr_in_illuminance0_target_input.attr,
> &dev_attr_in_illuminance0_calibrate.attr,
> &dev_attr_in_illuminance0_lux_table.attr,
>@@ -1587,8 +1587,8 @@ static struct attribute
>*tsl2x7x_ALSPRX_device_attrs[] = {
> &dev_attr_power_state.attr,
> &dev_attr_in_illuminance0_calibscale_available.attr,
> &dev_attr_in_illuminance0_integration_time.attr,
>- &iio_const_attr_in_illuminance0_integration_time_available\
>- .dev_attr.attr,
>+ &iio_const_attr_in_illuminance0_integration_time_available
>+ .dev_attr.attr,
> &dev_attr_in_illuminance0_target_input.attr,
> &dev_attr_in_illuminance0_calibrate.attr,
> &dev_attr_in_illuminance0_lux_table.attr,
>@@ -1607,8 +1607,8 @@ static struct attribute
>*tsl2x7x_ALSPRX2_device_attrs[] = {
> &dev_attr_power_state.attr,
> &dev_attr_in_illuminance0_calibscale_available.attr,
> &dev_attr_in_illuminance0_integration_time.attr,
>- &iio_const_attr_in_illuminance0_integration_time_available\
>- .dev_attr.attr,
>+ &iio_const_attr_in_illuminance0_integration_time_available
>+ .dev_attr.attr,
> &dev_attr_in_illuminance0_target_input.attr,
> &dev_attr_in_illuminance0_calibrate.attr,
> &dev_attr_in_illuminance0_lux_table.attr,
>diff --git a/drivers/staging/iio/meter/ade7854-i2c.c
>b/drivers/staging/iio/meter/ade7854-i2c.c
>index 5b33c7f..5d0671a 100644
>--- a/drivers/staging/iio/meter/ade7854-i2c.c
>+++ b/drivers/staging/iio/meter/ade7854-i2c.c
>@@ -195,7 +195,8 @@ static int ade7854_i2c_read_reg_32(struct device
>*dev,
> if (ret)
> goto out;
>
>- *val = (st->rx[0] << 24) | (st->rx[1] << 16) | (st->rx[2] << 8) |
>st->rx[3];
>+ *val = (st->rx[0] << 24) | (st->rx[1] << 16) |
>+ (st->rx[2] << 8) | st->rx[3];
> out:
> mutex_unlock(&st->buf_lock);
> return ret;
>diff --git a/drivers/staging/iio/resolver/ad2s1200.c
>b/drivers/staging/iio/resolver/ad2s1200.c
>index 36eedd8..e2b4820 100644
>--- a/drivers/staging/iio/resolver/ad2s1200.c
>+++ b/drivers/staging/iio/resolver/ad2s1200.c
>@@ -70,6 +70,7 @@ static int ad2s1200_read_raw(struct iio_dev
>*indio_dev,
> vel = (((s16)(st->rx[0])) << 4) | ((st->rx[1] & 0xF0) >> 4);
> vel = (vel << 4) >> 4;
> *val = vel;
>+ break;
> default:
> mutex_unlock(&st->lock);
> return -EINVAL;
--
Sent from my Android phone with K-9 Mail. Please excuse my brevity.
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
