Added changes so that the module can be enumerated via ACPI.
Also if there is no platform data available, it will use a default
orientation data.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
---
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 31 ++++++++++++++++++++++++++++--
1 file changed, 29 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 200163d..2b3f24d 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -24,8 +24,16 @@
#include <linux/kfifo.h>
#include <linux/spinlock.h>
#include <linux/iio/iio.h>
+#include <linux/acpi.h>
#include "inv_mpu_iio.h"
+/* Define some default platform data, if not supplied */
+static struct inv_mpu6050_platform_data inv_def_platform_data = {
+ .orientation = {-1, 0, 0,
+ 0, 1, 0,
+ 0, 0, -1 }
+};
+
/*
* this is the gyro scale translated from dynamic range plus/minus
* {250, 500, 1000, 2000} to rad/s
@@ -706,6 +714,7 @@ static int inv_mpu_probe(struct i2c_client *client,
struct inv_mpu6050_state *st;
struct iio_dev *indio_dev;
int result;
+ char *name;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_I2C_BLOCK))
@@ -717,7 +726,10 @@ static int inv_mpu_probe(struct i2c_client *client,
st = iio_priv(indio_dev);
st->client = client;
- st->plat_data = *(struct inv_mpu6050_platform_data
+ if (!dev_get_platdata(&client->dev))
+ st->plat_data = inv_def_platform_data;
+ else
+ st->plat_data = *(struct inv_mpu6050_platform_data
*)dev_get_platdata(&client->dev);
/* power is turned on inside check chip type*/
result = inv_check_and_setup_chip(st, id);
@@ -733,7 +745,14 @@ static int inv_mpu_probe(struct i2c_client *client,
i2c_set_clientdata(client, indio_dev);
indio_dev->dev.parent = &client->dev;
- indio_dev->name = id->name;
+
+ /* id will be NULL when enumerated via ACPI */
+ if (id)
+ name = (char *)id->name;
+ else
+ name = (char *)dev_name(&client->dev);
+
+ indio_dev->name = name;
indio_dev->channels = inv_mpu_channels;
indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
@@ -815,12 +834,20 @@ static const struct i2c_device_id inv_mpu_id[] = {
MODULE_DEVICE_TABLE(i2c, inv_mpu_id);
+static const struct acpi_device_id inv_acpi_match[] = {
+ {"INVN6050", INV_MPU6050},
+ {"INVN6500", INV_MPU6500},
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, inv_acpi_match);
+
static struct i2c_driver inv_mpu_driver = {
.probe = inv_mpu_probe,
.remove = inv_mpu_remove,
.id_table = inv_mpu_id,
.driver = {
.owner = THIS_MODULE,
+ .acpi_match_table = ACPI_PTR(inv_acpi_match),
.name = "inv-mpu6050",
.pm = INV_MPU6050_PMOPS,
},
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
