On 04/03/14 22:05, Sebastian Reichel wrote:
This converts twl4030-madc module to use the Industrial IO ADC
framework and adds device tree support.
Signed-off-by: Sebastian Reichel <sre@xxxxxxxxxx>
One issues right down in the remove function alongside the ones Lee raised.
Otherwise looks pretty much there to me.
---
drivers/mfd/twl4030-madc.c | 126 +++++++++++++++++++++++++++++++++++++++++----
1 file changed, 116 insertions(+), 10 deletions(-)
diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c
index 5458561..0479af0 100644
--- a/drivers/mfd/twl4030-madc.c
+++ b/drivers/mfd/twl4030-madc.c
@@ -47,11 +47,14 @@
#include <linux/gfp.h>
#include <linux/err.h>
+#include <linux/iio/iio.h>
+
/*
* struct twl4030_madc_data - a container for madc info
* @dev - pointer to device structure for madc
* @lock - mutex protecting this data structure
* @requests - Array of request struct corresponding to SW1, SW2 and RT
+ * @use_second_irq - IRQ selection (main or co-processor)
* @imr - Interrupt mask register of MADC
* @isr - Interrupt status register of MADC
*/
@@ -59,10 +62,71 @@ struct twl4030_madc_data {
struct device *dev;
struct mutex lock; /* mutex protecting this data structure */
struct twl4030_madc_request requests[TWL4030_MADC_NUM_METHODS];
+ bool use_second_irq;
int imr;
int isr;
};
+static int twl4030_madc_read(struct iio_dev *iio_dev,
+ const struct iio_chan_spec *chan,
+ int *val, int *val2, long mask)
+{
+ struct twl4030_madc_data *madc = iio_priv(iio_dev);
+ struct twl4030_madc_request req;
+ int ret;
+
+ req.method = madc->use_second_irq ? TWL4030_MADC_SW2 : TWL4030_MADC_SW1;
+
+ req.channels = BIT(chan->channel);
+ req.active = false;
+ req.func_cb = NULL;
+ req.type = TWL4030_MADC_WAIT;
+ req.raw = !(mask == IIO_CHAN_INFO_PROCESSED);
+ req.do_avg = (mask == IIO_CHAN_INFO_AVERAGE_RAW);
+
+ ret = twl4030_madc_conversion(&req);
+ if (ret < 0)
+ return ret;
+
+ *val = req.rbuf[chan->channel];
+
+ return IIO_VAL_INT;
+}
+
+static const struct iio_info twl4030_madc_iio_info = {
+ .read_raw = &twl4030_madc_read,
+ .driver_module = THIS_MODULE,
+};
+
+#define TWL4030_ADC_CHANNEL(_channel, _type, _name) { \
+ .type = _type, \
+ .channel = _channel, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_AVERAGE_RAW) | \
+ BIT(IIO_CHAN_INFO_PROCESSED), \
+ .datasheet_name = _name, \
+ .indexed = 1, \
+}
+
+static const struct iio_chan_spec twl4030_madc_iio_channels[] = {
+ TWL4030_ADC_CHANNEL(0, IIO_VOLTAGE, "ADCIN0"),
+ TWL4030_ADC_CHANNEL(1, IIO_TEMP, "ADCIN1"),
+ TWL4030_ADC_CHANNEL(2, IIO_VOLTAGE, "ADCIN2"),
+ TWL4030_ADC_CHANNEL(3, IIO_VOLTAGE, "ADCIN3"),
+ TWL4030_ADC_CHANNEL(4, IIO_VOLTAGE, "ADCIN4"),
+ TWL4030_ADC_CHANNEL(5, IIO_VOLTAGE, "ADCIN5"),
+ TWL4030_ADC_CHANNEL(6, IIO_VOLTAGE, "ADCIN6"),
+ TWL4030_ADC_CHANNEL(7, IIO_VOLTAGE, "ADCIN7"),
+ TWL4030_ADC_CHANNEL(8, IIO_VOLTAGE, "ADCIN8"),
+ TWL4030_ADC_CHANNEL(9, IIO_VOLTAGE, "ADCIN9"),
+ TWL4030_ADC_CHANNEL(10, IIO_CURRENT, "ADCIN10"),
+ TWL4030_ADC_CHANNEL(11, IIO_VOLTAGE, "ADCIN11"),
+ TWL4030_ADC_CHANNEL(12, IIO_VOLTAGE, "ADCIN12"),
+ TWL4030_ADC_CHANNEL(13, IIO_VOLTAGE, "ADCIN13"),
+ TWL4030_ADC_CHANNEL(14, IIO_VOLTAGE, "ADCIN14"),
+ TWL4030_ADC_CHANNEL(15, IIO_VOLTAGE, "ADCIN15"),
+};
+
static struct twl4030_madc_data *twl4030_madc;
struct twl4030_prescale_divider_ratios {
@@ -702,28 +766,50 @@ static int twl4030_madc_probe(struct platform_device *pdev)
{
struct twl4030_madc_data *madc;
struct twl4030_madc_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct device_node *np = pdev->dev.of_node;
int irq, ret;
u8 regval;
+ struct iio_dev *iio_dev = NULL;
- if (!pdata) {
- dev_err(&pdev->dev, "platform_data not available\n");
+ if (!pdata && !np) {
+ dev_err(&pdev->dev, "neither platform data nor Device Tree node available\n");
return -EINVAL;
}
- madc = devm_kzalloc(&pdev->dev, sizeof(*madc), GFP_KERNEL);
- if (!madc)
+
+ iio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*madc));
+ if (!iio_dev) {
+ dev_err(&pdev->dev, "failed allocating iio device\n");
return -ENOMEM;
+ }
+ madc = iio_priv(iio_dev);
madc->dev = &pdev->dev;
+ madc->use_second_irq = false;
+
+ iio_dev->name = dev_name(&pdev->dev);
+ iio_dev->dev.parent = &pdev->dev;
+ iio_dev->dev.of_node = pdev->dev.of_node;
+ iio_dev->info = &twl4030_madc_iio_info;
+ iio_dev->modes = INDIO_DIRECT_MODE;
+ iio_dev->channels = twl4030_madc_iio_channels;
+ iio_dev->num_channels = ARRAY_SIZE(twl4030_madc_iio_channels);
/*
* Phoenix provides 2 interrupt lines. The first one is connected to
* the OMAP. The other one can be connected to the other processor such
* as modem. Hence two separate ISR and IMR registers.
*/
- madc->imr = (pdata->irq_line == 1) ?
- TWL4030_MADC_IMR1 : TWL4030_MADC_IMR2;
- madc->isr = (pdata->irq_line == 1) ?
- TWL4030_MADC_ISR1 : TWL4030_MADC_ISR2;
+ if (pdata && pdata->irq_line != 1)
+ madc->use_second_irq = true;
+ else if (!pdata)
+ madc->use_second_irq = of_property_read_bool(np,
+ "ti,system-uses-second-madc-irq");
+
+ madc->imr = madc->use_second_irq ? TWL4030_MADC_IMR2 :
+ TWL4030_MADC_IMR1;
+ madc->isr = madc->use_second_irq ? TWL4030_MADC_ISR2 :
+ TWL4030_MADC_ISR1;
+
ret = twl4030_madc_set_power(madc, 1);
if (ret < 0)
return ret;
@@ -768,7 +854,7 @@ static int twl4030_madc_probe(struct platform_device *pdev)
}
}
- platform_set_drvdata(pdev, madc);
+ platform_set_drvdata(pdev, iio_dev);
mutex_init(&madc->lock);
irq = platform_get_irq(pdev, 0);
@@ -780,7 +866,15 @@ static int twl4030_madc_probe(struct platform_device *pdev)
goto err_i2c;
}
twl4030_madc = madc;
+
+ ret = iio_device_register(iio_dev);
+ if (ret) {
+ dev_dbg(&pdev->dev, "could not register iio device\n");
+ goto err_i2c;
+ }
+
return 0;
+
err_i2c:
twl4030_madc_set_current_generator(madc, 0, 0);
err_current_generator:
@@ -790,20 +884,32 @@ err_current_generator:
static int twl4030_madc_remove(struct platform_device *pdev)
{
- struct twl4030_madc_data *madc = platform_get_drvdata(pdev);
+ struct iio_dev *iio_dev = platform_get_drvdata(pdev);
+ struct twl4030_madc_data *madc = iio_priv(iio_dev);
twl4030_madc_set_current_generator(madc, 0, 0);
twl4030_madc_set_power(madc, 0);
+ iio_device_unregister(iio_dev);
Removing the user interfaces after disabling the current generator and turning the device
off seems to me to be a bad idea. There is a reason iio_device_unregister is almost
always the first thing done in the remove function.
Also from a general ease of review point of view. The remove function
should be in 'precise' reverse order of the probe function. Makes it
nice and obviously correct assuming the functions it is calling are
sensible!
+
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id twl_madc_of_match[] = {
+ {.compatible = "ti,twl4030-madc", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, twl_madc_of_match);
+#endif
+
static struct platform_driver twl4030_madc_driver = {
.probe = twl4030_madc_probe,
.remove = twl4030_madc_remove,
.driver = {
.name = "twl4030_madc",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(twl_madc_of_match),
},
};
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
