On Wed, Feb 26, 2014 at 8:29 AM, Johannes Thumshirn <johannes.thumshirn@xxxxxx> wrote: > The MCB (MEN Chameleon Bus) is a Bus specific to MEN Mikroelektronik > FPGA based devices. It is used to identify MCB based IP-Cores within > an FPGA and provide the necessary framework for instantiating drivers > for these devices. > > Signed-off-by: Johannes Thumshirn <johannes.thumshirn@xxxxxx> > --- > MAINTAINERS | 6 + > drivers/Kconfig | 2 + > drivers/Makefile | 1 + > drivers/mcb/Kconfig | 15 ++ > drivers/mcb/Makefile | 5 + > drivers/mcb/mcb-core.c | 414 ++++++++++++++++++++++++++++++++++++++++ > drivers/mcb/mcb-internal.h | 116 +++++++++++ > drivers/mcb/mcb-parse.c | 159 +++++++++++++++ > include/linux/mcb.h | 119 ++++++++++++ > include/linux/mod_devicetable.h | 5 + > 10 files changed, 842 insertions(+) > create mode 100644 drivers/mcb/Kconfig > create mode 100644 drivers/mcb/Makefile > create mode 100644 drivers/mcb/mcb-core.c > create mode 100644 drivers/mcb/mcb-internal.h > create mode 100644 drivers/mcb/mcb-parse.c > create mode 100644 include/linux/mcb.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index 85b3dd8..5d35f6c 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -5667,6 +5667,12 @@ L: linux-watchdog@xxxxxxxxxxxxxxx > S: Supported > F: drivers/watchdog/mena21_wdt.c > > +MEN CHAMELEON BUS (mcb) > +M: Johannes Thumshirn <johannes.thumshirn@xxxxxx> > +S: Supported > +F: drivers/mcb/ > +F: include/linux/mcb.h > + > METAG ARCHITECTURE > M: James Hogan <james.hogan@xxxxxxxxxx> > L: linux-metag@xxxxxxxxxxxxxxx > diff --git a/drivers/Kconfig b/drivers/Kconfig > index b3138fb..df2ac52 100644 > --- a/drivers/Kconfig > +++ b/drivers/Kconfig > @@ -170,4 +170,6 @@ source "drivers/phy/Kconfig" > > source "drivers/powercap/Kconfig" > > +source "drivers/mcb/Kconfig" > + > endmenu > diff --git a/drivers/Makefile b/drivers/Makefile > index 8e3b8b0..c5bf50c 100644 > --- a/drivers/Makefile > +++ b/drivers/Makefile > @@ -155,3 +155,4 @@ obj-$(CONFIG_IPACK_BUS) += ipack/ > obj-$(CONFIG_NTB) += ntb/ > obj-$(CONFIG_FMC) += fmc/ > obj-$(CONFIG_POWERCAP) += powercap/ > +obj-$(CONFIG_MCB) += mcb/ No single-driver directories like these. This needs to go somewhere else. > diff --git a/drivers/mcb/Kconfig b/drivers/mcb/Kconfig > new file mode 100644 > index 0000000..44c82d6 > --- /dev/null > +++ b/drivers/mcb/Kconfig > @@ -0,0 +1,15 @@ > +# > +# MEN Chameleon Bus (MCB) support > +# > + > +menuconfig MCB > + tristate "MCB support" > + default m Don't default to 'm' for new drivers. Just leave out the default (so it will default to 'n'). > + help > + > + The MCB (MEN Chameleon Bus) is a Bus specific to MEN Mikroelektronik > + FPGA based devices. It is used to identify MCB based IP-Cores within > + an FPGA and provide the necessary framework for instantiating drivers > + for these devices. > + > + If build as a module, the module is called mcb.ko Not reviewing the rest of the driver, came across the patch due to causing build breakage on last night's next ebsa110_defconfig for ARM: drivers/mcb/mcb-parse.c:105:2: error: implicit declaration of function 'memcpy_fromio' [-Werror=implicit-function-declaration] -Olof -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
