Hi Markus,
On Thu, Feb 20, 2014 at 1:21 PM, Markus Pargmann <mpa@xxxxxxxxxxxxxx> wrote:
> This is the core driver for imx25 touchscreen/adc driver. The module
> has one shared ADC and two different conversion queues which use the
> ADC. The two queues are identical. Both can be used for general purpose
> ADC but one is meant to be used for touchscreens.
>
> This driver is the core which manages the central components and
> registers of the TSC/ADC unit. It manages the IRQs and forwards them to
> the correct components.
>
> Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
That's great :-) Nice work!
> ---
> .../devicetree/bindings/mfd/fsl-imx25-tsadc.txt | 46 ++++
> drivers/mfd/Kconfig | 9 +
> drivers/mfd/Makefile | 2 +
> drivers/mfd/fsl-imx25-tsadc.c | 234 +++++++++++++++++++++
> include/linux/mfd/imx25-tsadc.h | 138 ++++++++++++
> 5 files changed, 429 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt
> create mode 100644 drivers/mfd/fsl-imx25-tsadc.c
> create mode 100644 include/linux/mfd/imx25-tsadc.h
>
> diff --git a/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt b/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt
> new file mode 100644
> index 0000000..a857af0e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt
> @@ -0,0 +1,46 @@
> +Freescale mx25 ADC/TSC multifunction device
> +
> +This device combines two general purpose conversion queues one used for general
> +ADC and the other used for touchscreens.
> +
> +Required properties:
> + - compatible: Should be "fsl,imx25-tsadc".
> + - reg: Memory range of the device.
> + - interrupts: Interrupt for this device as described in
> + interrupts/interrupts.txt
> + - clocks: An 'ipg' clock defined as described in clocks/clock.txt
> + - interrupt-controller: This device is an interrupt controller. It controls
> + the interrupts of both conversion queues.
> + - #interrupt-cells: Should be '<1>'.
> + - #address-cells: Should be '<1>'.
> + - #size-cells: Should be '<1>'.
> + - ranges
> +
> +This device includes two conversion queues which can be added as subnodes.
> +The first queue is for the touchscreen, the second for general purpose ADC.
> +
> +Example:
> + tscadc: tscadc@50030000 {
> + compatible = "fsl,imx25-tsadc";
> + reg = <0x50030000 0xc>;
> + interrupts = <46>;
> + clocks = <&clks 119>;
> + clock-names = "ipg";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + tsc: tcq@50030400 {
> + compatible = "fsl,imx25-tcq";
> + reg = <0x50030400 0x60>;
> + ...
> + };
> +
> + adc: gcq@50030800 {
> + compatible = "fsl,imx25-gcq";
> + reg = <0x50030800 0x60>;
> + ...
> + };
> + };
The meaning of 'tcq' and 'gcq' acronyms are not obvious. Could they be
written more explicitily?
Also, what does the '...' mean?
> +static int mx25_tsadc_domain_map(struct irq_domain *d, unsigned int irq,
> + irq_hw_number_t hwirq)
> +{
> + struct mx25_tsadc_priv *priv = d->host_data;
> +
> + irq_set_chip_data(irq, priv);
> + irq_set_chip_and_handler(irq, &mx25_tsadc_irq_chip,
> + handle_level_irq);
> +
> +#ifdef CONFIG_ARM
> + set_irq_flags(irq, IRQF_VALID);
> +#else
> + irq_set_noprobe(irq);
> +#endif
Do we really need these ifdef's? Can't we just assume that CONFIG_ARM
is always selected for this driver?
> +static int mx25_tsadc_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *np = dev->of_node;
> + struct mx25_tsadc_priv *priv;
> + struct resource *iores;
> + int ret;
> + void __iomem *iomem;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + iomem = devm_ioremap_resource(dev, iores);
> + if (IS_ERR(iomem)) {
> + dev_err(dev, "Failed to remap iomem\n");
> + return PTR_ERR(iomem);
> + }
> +
> + priv->regs = regmap_init_mmio(dev, iomem, &mx25_tsadc);
> + if (IS_ERR(priv->regs)) {
> + dev_err(dev, "Failed to initialize regmap\n");
> + return PTR_ERR(priv->regs);
> + }
> +
> + priv->clk = devm_clk_get(dev, "ipg");
> + if (IS_ERR(priv->clk)) {
> + dev_err(dev, "Failed to get ipg clock\n");
> + return PTR_ERR(priv->clk);
> + }
> +
> + /* Enable clock and reset the component */
> + regmap_update_bits(priv->regs, MX25_TSC_TGCR, MX25_TGCR_CLK_EN,
> + MX25_TGCR_CLK_EN);
> + regmap_update_bits(priv->regs, MX25_TSC_TGCR, MX25_TGCR_TSC_RST,
> + MX25_TGCR_TSC_RST);
> +
> + /* Setup powersaving mode, but enable internal reference voltage */
> + regmap_update_bits(priv->regs, MX25_TSC_TGCR, MX25_TGCR_POWERMODE_MASK,
> + MX25_TGCR_POWERMODE_SAVE);
> + regmap_update_bits(priv->regs, MX25_TSC_TGCR, MX25_TGCR_INTREFEN,
> + MX25_TGCR_INTREFEN);
> +
> + ret = mx25_tsadc_setup_irq(pdev, priv);
> + if (ret) {
> + dev_err(dev, "Failed to setup irqs\n");
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, priv);
> +
> + of_platform_populate(np, NULL, NULL, dev);
> +
> + dev_info(dev, "i.MX25/25 Touchscreen and ADC core driver loaded\n");
You could remove the double '25/25'.
> +
> + return 0;
> +}
> +
> +static const struct of_device_id mx25_tsadc_ids[] = {
> + { .compatible = "fsl,imx25-tsadc", },
> + { /* Sentinel */ }
> +};
> +
> +static struct platform_driver mx25_tsadc_driver = {
> + .driver = {
> + .name = "mx25-tsadc",
> + .owner = THIS_MODULE,
> + .of_match_table = mx25_tsadc_ids,
> + },
> + .probe = mx25_tsadc_probe,
> +};
> +module_platform_driver(mx25_tsadc_driver);
> +
> +MODULE_DESCRIPTION("MFD for ADC/TSC for Freescale mx25");
> +MODULE_AUTHOR("Markus Pargmann <mpa@xxxxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
MODULE_ALIAS() as well?
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
