On Sun, Feb 16, 2014 at 03:48:53PM +0800, Shawn Guo wrote:
> Copy more DT folks and lists, as I want to make sure everyone agrees on
> how the fixed regulators should organized in the device tree sources,
> before I apply the patch.
>
> On Sun, Jan 26, 2014 at 01:39:31PM +0800, Fugang Duan wrote:
> > vf610 has two ADC controllers, and vf610-twr board ADC0_SE5 pin connect
> > to sliding rheostat for ADC test, other ADC pins connect to connectors for
> > future use.
> >
> > Add support for ADC0_SE5.
> >
> > CC: Shawn Guo <shawn.guo@xxxxxxxxxx>
> > CC: Jonathan Cameron <jic23@xxxxxxxxxx>
> > CC: Mark Rutland <mark.rutland@xxxxxxx>
> > CC: Otavio Salvador <otavio@xxxxxxxxxxxxxxxx>
> > CC: Peter Meerwald <pmeerw@xxxxxxxxxx>
> > CC: Lars-Peter Clausen <lars@xxxxxxxxxx>
> > Signed-off-by: Fugang Duan <B38611@xxxxxxxxxxxxx>
> > ---
> > arch/arm/boot/dts/vf610-twr.dts | 21 +++++++++++++++++++++
> > arch/arm/boot/dts/vf610.dtsi | 26 ++++++++++++++++++++++++++
> > 2 files changed, 47 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
> > index c8047ca..d867be3 100644
> > --- a/arch/arm/boot/dts/vf610-twr.dts
> > +++ b/arch/arm/boot/dts/vf610-twr.dts
> > @@ -34,6 +34,27 @@
> > };
> > };
> >
> > + regulators {
> > + compatible = "simple-bus";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + reg_vcc_3v3_mcu: regulator@0 {
> > + compatible = "regulator-fixed";
> > + reg = <0>;
> > + regulator-name = "vcc_3v3_mcu";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + };
> > + };
>
> Per discussion [1], Mark Rutland suggests that instead of organizing
> the fixed regulator nodes in a simple-bus container, it should be put
> under root node directly like below.
>
> / {
> reg_vcc_3v3_mcu: regulator_0 {
> compatible = "regulator-fixed";
> regulator-name = "vcc_3v3_mcu";
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> };
> };
>
> Is this what all DT folks agree on? At least the node name should be
> 'regulator-0' since it's more idiomatic to use '-' than '_' in node
> name?
It looks that Mark is giving up [1]. And we're fine with the original
code then.
Shawn
[1] http://thread.gmane.org/gmane.linux.drivers.devicetree/61894/focus=62405
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
