Re: [PATCH] iio: gyro: itg3200: Add DT support.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 11/01/14 21:17, Marek Belisko wrote:
Signed-off-by: NeilBrown <neilb@xxxxxxx>
Signed-off-by: Marek Belisko <marek@xxxxxxxxxxxxx>
Unless it is very recent, I don't the the invensense vendor-prefix is in
vendor-prefixes.txt. Please add that to the patch.

Otherwise, there is nothing here that isn't covered by the trivial
i2c bindings - thus perhaps it should be an entry in bindings/i2c/trivial-devices.txt?

Personally I'm not that fond of the trivial file as a single location
for the relevant info makes more sense to me.  Still thought I'd bring
it up as a possibility.

Jonathan
---
  .../devicetree/bindings/iio/gyro/itg3200.txt       | 22 ++++++++++++++++++++++
  drivers/iio/gyro/itg3200_core.c                    |  9 +++++++++
  2 files changed, 31 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/iio/gyro/itg3200.txt

diff --git a/Documentation/devicetree/bindings/iio/gyro/itg3200.txt b/Documentation/devicetree/bindings/iio/gyro/itg3200.txt
new file mode 100644
index 0000000..b1b18dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/gyro/itg3200.txt
@@ -0,0 +1,22 @@
+* InvenSense ITG-3200 gyroscope
+
+http://www.invensense.com/mems/gyro/itg3200.html
+
+Required properties:
+
+  - compatible : should be "invensense,itg3200"
+  - reg : the I2C address of the sensor
+
+Optional properties:
+
+  - interrupt-parent : should be the phandle for the interrupt controller
+  - interrupts : interrupt mapping for GPIO IRQ
+
+Example:
+
+itg3200@68 {
+	compatible = "invensense,itg3200";
+	reg = <0x68>;
+	interrupt-parent = <&gpio2>;
+	interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+};
diff --git a/drivers/iio/gyro/itg3200_core.c b/drivers/iio/gyro/itg3200_core.c
index 4d3f3b9..adbf20d 100644
--- a/drivers/iio/gyro/itg3200_core.c
+++ b/drivers/iio/gyro/itg3200_core.c
@@ -374,10 +374,19 @@ static const struct i2c_device_id itg3200_id[] = {
  };
  MODULE_DEVICE_TABLE(i2c, itg3200_id);

+#ifdef CONFIG_OF
+static const struct of_device_id itg3200_of_match[] = {
+	{ .compatible = "invensense,itg3200", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, itg3200_of_match);
+#endif
+
  static struct i2c_driver itg3200_driver = {
  	.driver = {
  		.owner  = THIS_MODULE,
  		.name	= "itg3200",
+		.of_match_table = of_match_ptr(itg3200_of_match),
  	},
  	.id_table	= itg3200_id,
  	.probe		= itg3200_probe,

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux