On 13/01/14 21:25, Peter Meerwald wrote:
Use the correct channel2 member instead of channel when dealing with sysfs
reads/writes
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
as a bonus, m is renamed to mask
Which would have been relevant back when it was a mask. Still it doesn't
make things worse, so never mind ;) One day someone might be bored enough
to clean up all the places in read_raw etc where the variable is called mask
but is infact a straight number.
Acked-by: Peter Meerwald <pmeerw@xxxxxxxxxx>
Applied to the fixes-togreg branch of iio.git - initially pushed out as testing
for the autobuilders to thoroughly hammer.
---
drivers/iio/light/tsl2563.c | 16 ++++++++++------
1 files changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
index 5e5d9de..2be6df3 100644
--- a/drivers/iio/light/tsl2563.c
+++ b/drivers/iio/light/tsl2563.c
@@ -460,10 +460,14 @@ static int tsl2563_write_raw(struct iio_dev *indio_dev,
{
struct tsl2563_chip *chip = iio_priv(indio_dev);
- if (chan->channel == IIO_MOD_LIGHT_BOTH)
+ if (mask != IIO_CHAN_INFO_CALIBSCALE)
+ return -EINVAL;
+ if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
chip->calib0 = calib_from_sysfs(val);
- else
+ else if (chan->channel2 == IIO_MOD_LIGHT_IR)
chip->calib1 = calib_from_sysfs(val);
+ else
+ return -EINVAL;
return 0;
}
@@ -472,14 +476,14 @@ static int tsl2563_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val,
int *val2,
- long m)
+ long mask)
{
int ret = -EINVAL;
u32 calib0, calib1;
struct tsl2563_chip *chip = iio_priv(indio_dev);
mutex_lock(&chip->lock);
- switch (m) {
+ switch (mask) {
case IIO_CHAN_INFO_RAW:
case IIO_CHAN_INFO_PROCESSED:
switch (chan->type) {
@@ -498,7 +502,7 @@ static int tsl2563_read_raw(struct iio_dev *indio_dev,
ret = tsl2563_get_adc(chip);
if (ret)
goto error_ret;
- if (chan->channel == 0)
+ if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
*val = chip->data0;
else
*val = chip->data1;
@@ -510,7 +514,7 @@ static int tsl2563_read_raw(struct iio_dev *indio_dev,
break;
case IIO_CHAN_INFO_CALIBSCALE:
- if (chan->channel == 0)
+ if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
*val = calib_to_sysfs(chip->calib0);
else
*val = calib_to_sysfs(chip->calib1);
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
