On Tue, Nov 26, 2013 at 06:56:34PM +0800, Fugang Duan wrote: > +Optional properties: > +- fsl,adc-io-pinctl: Enable field for the I/O port control of MCU pins used as analog inputs. > +- fsl,adc-vref: ADC refrence voltage value, unit is uV. > +- fsl,adc-clk-div: Current clock divider value, such as 1,2,4,8,16 and so on. > +- fsl,adc-res: ADC conversion mode selection, such as 8 for 8-bit, 10 for 10-bit, 12 for 12-bit mode. > +- fsl,adc-sam-time: ADC sample time duration, number of ADC clocks, such as 2, 4, 6, 8, 12, 16, 20, 24 > +- fsl,adc-aver-sam-sel: Determines how many ADC conversions will be averaged to create the ADC average result. > + The Optional value is 4, 8, 16, 32. > +- fsl,adc-hw-aver-en: Bool type to decide enable hardware average function. > +- fsl,adc-low-power-mode: Bool type to decide enable ADC low power mode. > +- fsl,adc-high-speed-conv: Bool type to decide enable ADC high speed mode. > +- vref: The regulator to support ADC refrence voltage. Shouldn't it be vref-supply? Shawn -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
