Hi Maxime, everyone, only one point: it's possible to use the same names with DT? (using _ instead of -) Why only for i2c? Thanks, Denis > Hi everyone, > > This is an attempt at adding the DT probing to the st_sensors > accelerometers and gyroscopes. > > It's somewhat hackish, because the core actively checks for the value > of the device at probe time, and DT probing generates a quite > different name. > > I first tried to turn the function st_sensors_check_device_support the > other way around, with the "leaf" providing the sensor structure, and > the function checking that it's consistent with the WAI stored in the > sensor. However, it turned to be a quite intrusive change, so I'm > sending the easiest one, to try to get some feedback :) > > Thanks! > Maxime > > Maxime Ripard (3): > iio: accel: Add device tree probing for STMicro accelerometers > iio: accel: Add device tree probing for STMicro gyroscopes > ARM: cfa10057: Add the accelerometer and gyroscope to the device tree > > .../devicetree/bindings/iio/accel/st_accel_i2c.txt | 22 +++++++++++++++ > .../devicetree/bindings/iio/gyro/st_gyro_i2c.txt | 20 +++++++++++++ > arch/arm/boot/dts/imx28-cfa10057.dts | 13 +++++++++ > drivers/iio/accel/st_accel_i2c.c | 33 ++++++++++++++++++++++ > drivers/iio/gyro/st_gyro_i2c.c | 31 ++++++++++++++++++++ > 5 files changed, 119 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/accel/st_accel_i2c.txt > create mode 100644 Documentation/devicetree/bindings/iio/gyro/st_gyro_i2c.txt > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html