Re: [PATCH 2/3] iio: at91: move the num_channels from DT to driver itself

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/08/13 04:48, Josh Wu wrote:
> CC: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: Josh Wu <josh.wu@xxxxxxxxx>
> Acked-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
Applied to the togreg branch of iio.git

Thanks,

> ---
>  .../devicetree/bindings/arm/atmel-adc.txt          |    1 -
>  drivers/iio/adc/at91_adc.c                         |   12 +++++-------
>  2 files changed, 5 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/arm/atmel-adc.txt b/Documentation/devicetree/bindings/arm/atmel-adc.txt
> index 723c205..0e65e01 100644
> --- a/Documentation/devicetree/bindings/arm/atmel-adc.txt
> +++ b/Documentation/devicetree/bindings/arm/atmel-adc.txt
> @@ -7,7 +7,6 @@ Required properties:
>    - interrupts: Should contain the IRQ line for the ADC
>    - atmel,adc-channels-used: Bitmask of the channels muxed and enable for this
>      device
> -  - atmel,adc-num-channels: Number of channels available in the ADC
>    - atmel,adc-startup-time: Startup Time of the ADC in microseconds as
>      defined in the datasheet
>    - atmel,adc-vref: Reference voltage in millivolts for the conversions
> diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
> index cee04a4..22cf61d2 100644
> --- a/drivers/iio/adc/at91_adc.c
> +++ b/drivers/iio/adc/at91_adc.c
> @@ -43,6 +43,7 @@ struct at91_adc_caps {
>  	/* startup time calculate function */
>  	u32 (*calc_startup_ticks)(u8 startup_time, u32 adc_clk_khz);
>  
> +	u8	num_channels;
>  	struct at91_adc_reg_desc registers;
>  };
>  
> @@ -502,13 +503,6 @@ static int at91_adc_probe_dt(struct at91_adc_state *st,
>  	}
>  	st->channels_mask = prop;
>  
> -	if (of_property_read_u32(node, "atmel,adc-num-channels", &prop)) {
> -		dev_err(&idev->dev, "Missing adc-num-channels property in the DT.\n");
> -		ret = -EINVAL;
> -		goto error_ret;
> -	}
> -	st->num_channels = prop;
> -
>  	st->sleep_mode = of_property_read_bool(node, "atmel,adc-sleep-mode");
>  
>  	if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) {
> @@ -534,6 +528,7 @@ static int at91_adc_probe_dt(struct at91_adc_state *st,
>  		goto error_ret;
>  
>  	st->registers = &st->caps->registers;
> +	st->num_channels = st->caps->num_channels;
>  	st->trigger_number = of_get_child_count(node);
>  	st->trigger_list = devm_kzalloc(&idev->dev, st->trigger_number *
>  					sizeof(struct at91_adc_trigger),
> @@ -779,6 +774,7 @@ static int at91_adc_remove(struct platform_device *pdev)
>  #ifdef CONFIG_OF
>  static struct at91_adc_caps at91sam9260_caps = {
>  	.calc_startup_ticks = calc_startup_ticks_9260,
> +	.num_channels = 4,
>  	.registers = {
>  		.channel_base = AT91_ADC_CHR(0),
>  		.drdy_mask = AT91_ADC_DRDY,
> @@ -791,6 +787,7 @@ static struct at91_adc_caps at91sam9260_caps = {
>  
>  static struct at91_adc_caps at91sam9g45_caps = {
>  	.calc_startup_ticks = calc_startup_ticks_9260,	/* same as 9260 */
> +	.num_channels = 8,
>  	.registers = {
>  		.channel_base = AT91_ADC_CHR(0),
>  		.drdy_mask = AT91_ADC_DRDY,
> @@ -803,6 +800,7 @@ static struct at91_adc_caps at91sam9g45_caps = {
>  
>  static struct at91_adc_caps at91sam9x5_caps = {
>  	.calc_startup_ticks = calc_startup_ticks_9x5,
> +	.num_channels = 12,
>  	.registers = {
>  		.channel_base = AT91_ADC_CDR0_9X5,
>  		.drdy_mask = AT91_ADC_SR_DRDY_9X5,
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux