Lee Jones <lee.jones@xxxxxxxxxx> wrote:
>This patch contains some pretty basic clean-ups in probe() pertaining
>to
>the simplification of error handling and a couple of readability
>adaptions.
>
>Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
>---
>drivers/iio/pressure/st_pressure_core.c | 32
>++++++++++++++++----------------
> 1 file changed, 16 insertions(+), 16 deletions(-)
>
>diff --git a/drivers/iio/pressure/st_pressure_core.c
>b/drivers/iio/pressure/st_pressure_core.c
>index 3abada2..6ffd949 100644
>--- a/drivers/iio/pressure/st_pressure_core.c
>+++ b/drivers/iio/pressure/st_pressure_core.c
>@@ -232,21 +232,23 @@ static const struct iio_trigger_ops
>st_press_trigger_ops = {
> int st_press_common_probe(struct iio_dev *indio_dev,
> struct st_sensors_platform_data *plat_data)
> {
>- int err;
> struct st_sensor_data *pdata = iio_priv(indio_dev);
>+ int irq = pdata->get_irq_data_ready(indio_dev);
>+ int err;
>
> indio_dev->modes = INDIO_DIRECT_MODE;
> indio_dev->info = &press_info;
>
> err = st_sensors_check_device_support(indio_dev,
>- ARRAY_SIZE(st_press_sensors), st_press_sensors);
>+ ARRAY_SIZE(st_press_sensors),
>+ st_press_sensors);
> if (err < 0)
>- goto st_press_common_probe_error;
>+ return err;
>
> pdata->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS;
>- pdata->multiread_bit = pdata->sensor->multi_read_bit;
>- indio_dev->channels = pdata->sensor->ch;
>- indio_dev->num_channels = pdata->sensor->num_ch;
>+ pdata->multiread_bit = pdata->sensor->multi_read_bit;
>+ indio_dev->channels = pdata->sensor->ch;
>+ indio_dev->num_channels = pdata->sensor->num_ch;
>
> if (pdata->sensor->fs.addr != 0)
> pdata->current_fullscale = (struct st_sensor_fullscale_avl *)
>@@ -261,32 +263,30 @@ int st_press_common_probe(struct iio_dev
>*indio_dev,
>
> err = st_sensors_init_sensor(indio_dev, plat_data);
> if (err < 0)
>- goto st_press_common_probe_error;
>+ return err;
>
>- if (pdata->get_irq_data_ready(indio_dev) > 0) {
>+ if (irq > 0) {
> err = st_press_allocate_ring(indio_dev);
> if (err < 0)
>- goto st_press_common_probe_error;
>+ return err;
>
> err = st_sensors_allocate_trigger(indio_dev,
>- ST_PRESS_TRIGGER_OPS);
>+ ST_PRESS_TRIGGER_OPS);
> if (err < 0)
> goto st_press_probe_trigger_error;
> }
>
> err = iio_device_register(indio_dev);
>- if (err)
This bit of handling is confusing. I would much rather see the if IRQ at the goto. Here the first thought is why is it not an error if there is no IRQ!
>+ if (err && irq > 0)
> goto st_press_device_register_error;
>
> return err;
>
> st_press_device_register_error:
>- if (pdata->get_irq_data_ready(indio_dev) > 0)
>- st_sensors_deallocate_trigger(indio_dev);
>+ st_sensors_deallocate_trigger(indio_dev);
> st_press_probe_trigger_error:
>- if (pdata->get_irq_data_ready(indio_dev) > 0)
>- st_press_deallocate_ring(indio_dev);
>-st_press_common_probe_error:
>+ st_press_deallocate_ring(indio_dev);
>+
> return err;
> }
> EXPORT_SYMBOL(st_press_common_probe);
--
Sent from my Android phone with K-9 Mail. Please excuse my brevity.
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
