This patch contains some pretty basic clean-ups in probe() pertaining to
the simplification of error handling and a couple of readability adaptions.
Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
drivers/iio/pressure/st_pressure_core.c | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 3abada2..6ffd949 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -232,21 +232,23 @@ static const struct iio_trigger_ops st_press_trigger_ops = {
int st_press_common_probe(struct iio_dev *indio_dev,
struct st_sensors_platform_data *plat_data)
{
- int err;
struct st_sensor_data *pdata = iio_priv(indio_dev);
+ int irq = pdata->get_irq_data_ready(indio_dev);
+ int err;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &press_info;
err = st_sensors_check_device_support(indio_dev,
- ARRAY_SIZE(st_press_sensors), st_press_sensors);
+ ARRAY_SIZE(st_press_sensors),
+ st_press_sensors);
if (err < 0)
- goto st_press_common_probe_error;
+ return err;
pdata->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS;
- pdata->multiread_bit = pdata->sensor->multi_read_bit;
- indio_dev->channels = pdata->sensor->ch;
- indio_dev->num_channels = pdata->sensor->num_ch;
+ pdata->multiread_bit = pdata->sensor->multi_read_bit;
+ indio_dev->channels = pdata->sensor->ch;
+ indio_dev->num_channels = pdata->sensor->num_ch;
if (pdata->sensor->fs.addr != 0)
pdata->current_fullscale = (struct st_sensor_fullscale_avl *)
@@ -261,32 +263,30 @@ int st_press_common_probe(struct iio_dev *indio_dev,
err = st_sensors_init_sensor(indio_dev, plat_data);
if (err < 0)
- goto st_press_common_probe_error;
+ return err;
- if (pdata->get_irq_data_ready(indio_dev) > 0) {
+ if (irq > 0) {
err = st_press_allocate_ring(indio_dev);
if (err < 0)
- goto st_press_common_probe_error;
+ return err;
err = st_sensors_allocate_trigger(indio_dev,
- ST_PRESS_TRIGGER_OPS);
+ ST_PRESS_TRIGGER_OPS);
if (err < 0)
goto st_press_probe_trigger_error;
}
err = iio_device_register(indio_dev);
- if (err)
+ if (err && irq > 0)
goto st_press_device_register_error;
return err;
st_press_device_register_error:
- if (pdata->get_irq_data_ready(indio_dev) > 0)
- st_sensors_deallocate_trigger(indio_dev);
+ st_sensors_deallocate_trigger(indio_dev);
st_press_probe_trigger_error:
- if (pdata->get_irq_data_ready(indio_dev) > 0)
- st_press_deallocate_ring(indio_dev);
-st_press_common_probe_error:
+ st_press_deallocate_ring(indio_dev);
+
return err;
}
EXPORT_SYMBOL(st_press_common_probe);
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
