From: "Patil, Rachna" <rachna@xxxxxx>
ADC is ideally expected to work at a frequency of 3MHz.
The present code had a check, which returned error if the frequency
went below the threshold value. But since AM335x supports various
working frequencies, this check is not required.
Now the code just uses the internal ADC clock divider to set the ADC
frequency w.r.t the sys clock.
Signed-off-by: Patil, Rachna <rachna@xxxxxx>
Signed-off-by: Zubair Lutfullah <zubair.lutfullah@xxxxxxxxx>
---
drivers/mfd/ti_am335x_tscadc.c | 6 +-----
include/linux/mfd/ti_am335x_tscadc.h | 1 -
2 files changed, 1 insertion(+), 6 deletions(-)
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 9f5c326..b8d7dfb 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -197,11 +197,7 @@ static int ti_tscadc_probe(struct platform_device *pdev)
clock_rate = clk_get_rate(clk);
clk_put(clk);
clk_value = clock_rate / ADC_CLK;
- if (clk_value < MAX_CLK_DIV) {
- dev_err(&pdev->dev, "clock input less than min clock requirement\n");
- err = -EINVAL;
- goto err_disable_clk;
- }
+
/* TSCADC_CLKDIV needs to be configured to the value minus 1 */
clk_value = clk_value - 1;
tscadc_writel(tscadc, REG_CLKDIV, clk_value);
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index 3058aef..136463b 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -127,7 +127,6 @@
#define SEQ_STATUS BIT(5)
#define ADC_CLK 3000000
-#define MAX_CLK_DIV 7
#define TOTAL_STEPS 16
#define TOTAL_CHANNELS 8
#define FIFO1_THRESHOLD 19
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
