On 06/24/2013 07:30 AM, Denis CIOCCA wrote: > Acked-by: "Denis Ciocca" <denis.ciocca@xxxxxx> Applied to the togreg branch of iio.git Thanks > > On Sunday, June 23, 2013 11:28:20 PM Peter Meerwald wrote: >> Signed-off-by: Peter Meerwald <pmeerw@xxxxxxxxxx> >> Cc: Denis Ciocca <denis.ciocca@xxxxxx> >> --- >> drivers/iio/accel/Kconfig | 4 ++-- >> drivers/iio/gyro/Kconfig | 4 ++-- >> drivers/iio/magnetometer/Kconfig | 4 ++-- >> drivers/iio/pressure/Kconfig | 4 ++-- >> 4 files changed, 8 insertions(+), 8 deletions(-) >> >> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig >> index 719d83f..a002675 100644 >> --- a/drivers/iio/accel/Kconfig >> +++ b/drivers/iio/accel/Kconfig >> @@ -33,8 +33,8 @@ config IIO_ST_ACCEL_3AXIS >> LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC, >> LIS331DLH, LSM303DL, LSM303DLM, LSM330. >> >> - This driver can also be built as a module. If so, will be created >> - these modules: >> + This driver can also be built as a module. If so, these modules >> + will be created: >> - st_accel (core functions for the driver [it is mandatory]); >> - st_accel_i2c (necessary for the I2C devices [optional*]); >> - st_accel_spi (necessary for the SPI devices [optional*]); >> diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig >> index 8498e9d..1fdcc84 100644 >> --- a/drivers/iio/gyro/Kconfig >> +++ b/drivers/iio/gyro/Kconfig >> @@ -58,8 +58,8 @@ config IIO_ST_GYRO_3AXIS >> Say yes here to build support for STMicroelectronics gyroscopes: >> L3G4200D, LSM330DL, L3GD20, L3GD20H, LSM330DLC, L3G4IS, LSM330. >> >> - This driver can also be built as a module. If so, will be created >> - these modules: >> + This driver can also be built as a module. If so, these modules >> + will be created: >> - st_gyro (core functions for the driver [it is mandatory]); >> - st_gyro_i2c (necessary for the I2C devices [optional*]); >> - st_gyro_spi (necessary for the SPI devices [optional*]); >> diff --git a/drivers/iio/magnetometer/Kconfig >> b/drivers/iio/magnetometer/Kconfig index c332b0a..4d55b1b 100644 >> --- a/drivers/iio/magnetometer/Kconfig >> +++ b/drivers/iio/magnetometer/Kconfig >> @@ -36,8 +36,8 @@ config IIO_ST_MAGN_3AXIS >> Say yes here to build support for STMicroelectronics magnetometers: >> LSM303DLHC, LSM303DLM, LIS3MDL. >> >> - This driver can also be built as a module. If so, will be created >> - these modules: >> + This driver can also be built as a module. If so, these modules >> + will be created: >> - st_magn (core functions for the driver [it is mandatory]); >> - st_magn_i2c (necessary for the I2C devices [optional*]); >> - st_magn_spi (necessary for the SPI devices [optional*]); >> diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig >> index 3cba7f5..56ae890 100644 >> --- a/drivers/iio/pressure/Kconfig >> +++ b/drivers/iio/pressure/Kconfig >> @@ -14,8 +14,8 @@ config IIO_ST_PRESS >> Say yes here to build support for STMicroelectronics pressure >> sensors: LPS331AP. >> >> - This driver can also be built as a module. If so, will be created >> - these modules: >> + This driver can also be built as a module. If so, these modules >> + will be created: >> - st_pressure (core functions for the driver [it is mandatory]); >> - st_pressure_i2c (necessary for the I2C devices [optional*]); >> - st_pressure_spi (necessary for the SPI devices [optional*]);-- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
