Acked-by: "Denis Ciocca" <denis.ciocca@xxxxxx> On Sunday, June 23, 2013 11:28:20 PM Peter Meerwald wrote: > Signed-off-by: Peter Meerwald <pmeerw@xxxxxxxxxx> > Cc: Denis Ciocca <denis.ciocca@xxxxxx> > --- > drivers/iio/accel/Kconfig | 4 ++-- > drivers/iio/gyro/Kconfig | 4 ++-- > drivers/iio/magnetometer/Kconfig | 4 ++-- > drivers/iio/pressure/Kconfig | 4 ++-- > 4 files changed, 8 insertions(+), 8 deletions(-) > > diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig > index 719d83f..a002675 100644 > --- a/drivers/iio/accel/Kconfig > +++ b/drivers/iio/accel/Kconfig > @@ -33,8 +33,8 @@ config IIO_ST_ACCEL_3AXIS > LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC, > LIS331DLH, LSM303DL, LSM303DLM, LSM330. > > - This driver can also be built as a module. If so, will be created > - these modules: > + This driver can also be built as a module. If so, these modules > + will be created: > - st_accel (core functions for the driver [it is mandatory]); > - st_accel_i2c (necessary for the I2C devices [optional*]); > - st_accel_spi (necessary for the SPI devices [optional*]); > diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig > index 8498e9d..1fdcc84 100644 > --- a/drivers/iio/gyro/Kconfig > +++ b/drivers/iio/gyro/Kconfig > @@ -58,8 +58,8 @@ config IIO_ST_GYRO_3AXIS > Say yes here to build support for STMicroelectronics gyroscopes: > L3G4200D, LSM330DL, L3GD20, L3GD20H, LSM330DLC, L3G4IS, LSM330. > > - This driver can also be built as a module. If so, will be created > - these modules: > + This driver can also be built as a module. If so, these modules > + will be created: > - st_gyro (core functions for the driver [it is mandatory]); > - st_gyro_i2c (necessary for the I2C devices [optional*]); > - st_gyro_spi (necessary for the SPI devices [optional*]); > diff --git a/drivers/iio/magnetometer/Kconfig > b/drivers/iio/magnetometer/Kconfig index c332b0a..4d55b1b 100644 > --- a/drivers/iio/magnetometer/Kconfig > +++ b/drivers/iio/magnetometer/Kconfig > @@ -36,8 +36,8 @@ config IIO_ST_MAGN_3AXIS > Say yes here to build support for STMicroelectronics magnetometers: > LSM303DLHC, LSM303DLM, LIS3MDL. > > - This driver can also be built as a module. If so, will be created > - these modules: > + This driver can also be built as a module. If so, these modules > + will be created: > - st_magn (core functions for the driver [it is mandatory]); > - st_magn_i2c (necessary for the I2C devices [optional*]); > - st_magn_spi (necessary for the SPI devices [optional*]); > diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig > index 3cba7f5..56ae890 100644 > --- a/drivers/iio/pressure/Kconfig > +++ b/drivers/iio/pressure/Kconfig > @@ -14,8 +14,8 @@ config IIO_ST_PRESS > Say yes here to build support for STMicroelectronics pressure > sensors: LPS331AP. > > - This driver can also be built as a module. If so, will be created > - these modules: > + This driver can also be built as a module. If so, these modules > + will be created: > - st_pressure (core functions for the driver [it is mandatory]); > - st_pressure_i2c (necessary for the I2C devices [optional*]); > - st_pressure_spi (necessary for the SPI devices [optional*]);-- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
