Re: [PATCH 10/15] staging:iio:adis16400: Code style cleanup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 16/01/13 12:48, Lars-Peter Clausen wrote:
Do a set of minor miscellaneous code style cleanups for the adis16400 before
moving it out of staging. Delete outdated comments, removed excess whitespace,
add missing whitespace, replace u{8,16} with uint{8,16}_t.

Is there a move that I've missed to move away from u8 and friends?

Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx>
---
  drivers/staging/iio/imu/adis16400_core.c | 81 +++++++++++++++-----------------
  1 file changed, 37 insertions(+), 44 deletions(-)

diff --git a/drivers/staging/iio/imu/adis16400_core.c b/drivers/staging/iio/imu/adis16400_core.c
index c08490b..1bbe5ee 100644
--- a/drivers/staging/iio/imu/adis16400_core.c
+++ b/drivers/staging/iio/imu/adis16400_core.c
@@ -45,7 +45,7 @@ enum adis16400_chip_variant {
  static int adis16334_get_freq(struct adis16400_state *st)
  {
  	int ret;
-	u16 t;
+	uint16_t t;

  	ret = adis_read_reg_16(&st->adis, ADIS16400_SMPL_PRD, &t);
  	if (ret < 0)
@@ -78,12 +78,13 @@ static int adis16334_set_freq(struct adis16400_state *st, unsigned int freq)
  static int adis16400_get_freq(struct adis16400_state *st)
  {
  	int sps, ret;
-	u16 t;
+	uint16_t t;

  	ret = adis_read_reg_16(&st->adis, ADIS16400_SMPL_PRD, &t);
  	if (ret < 0)
  		return ret;
-	sps =  (t & ADIS16400_SMPL_PRD_TIME_BASE) ? 53 : 1638;
+
+	sps = (t & ADIS16400_SMPL_PRD_TIME_BASE) ? 53 : 1638;
  	sps /= (t & ADIS16400_SMPL_PRD_DIV_MASK) + 1;

  	return sps;
@@ -97,6 +98,7 @@ static int adis16400_set_freq(struct adis16400_state *st, unsigned int freq)
  	if (t > 0)
  		t--;
  	t &= ADIS16400_SMPL_PRD_DIV_MASK;
+
  	if ((t & ADIS16400_SMPL_PRD_DIV_MASK) >= 0x0A)
  		st->adis.spi->max_speed_hz = ADIS16400_SPI_SLOW;
  	else
@@ -111,13 +113,13 @@ static ssize_t adis16400_read_frequency(struct device *dev,
  {
  	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
  	struct adis16400_state *st = iio_priv(indio_dev);
-	int ret, len = 0;
+	int ret;

  	ret = st->variant->get_freq(st);
  	if (ret < 0)
  		return ret;
-	len = sprintf(buf, "%d\n", ret);
-	return len;
+
+	return sprintf(buf, "%d\n", ret);
  }

  static const unsigned adis16400_3db_divisors[] = {
@@ -134,8 +136,8 @@ static const unsigned adis16400_3db_divisors[] = {
  static int adis16400_set_filter(struct iio_dev *indio_dev, int sps, int val)
  {
  	struct adis16400_state *st = iio_priv(indio_dev);
+	uint16_t val16;
  	int i, ret;
-	u16 val16;

  	for (i = ARRAY_SIZE(adis16400_3db_divisors) - 1; i >= 1; i--) {
  		if (sps / adis16400_3db_divisors[i] >= val)
@@ -152,26 +154,22 @@ static int adis16400_set_filter(struct iio_dev *indio_dev, int sps, int val)
  }

  static ssize_t adis16400_write_frequency(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf,
-		size_t len)
+	struct device_attribute *attr, const char *buf, size_t len)
  {
  	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
  	struct adis16400_state *st = iio_priv(indio_dev);
  	long val;
  	int ret;

-	ret = strict_strtol(buf, 10, &val);
+	ret = kstrtol(buf, 10, &val);
  	if (ret)
  		return ret;
+
  	if (val == 0)
  		return -EINVAL;

  	mutex_lock(&indio_dev->mlock);
-
  	st->variant->set_freq(st, val);
-
-	/* Also update the filter */
  	mutex_unlock(&indio_dev->mlock);

  	return ret ? ret : len;
@@ -182,9 +180,9 @@ static int adis16400_stop_device(struct iio_dev *indio_dev)
  {
  	struct adis16400_state *st = iio_priv(indio_dev);
  	int ret;
-	u16 val = ADIS16400_SLP_CNT_POWER_OFF;

-	ret = adis_write_reg_16(&st->adis, ADIS16400_SLP_CNT, val);
+	ret = adis_write_reg_16(&st->adis, ADIS16400_SLP_CNT,
+			ADIS16400_SLP_CNT_POWER_OFF);
  	if (ret)
  		dev_err(&indio_dev->dev,
  			"problem with turning device off: SLP_CNT");
@@ -194,10 +192,10 @@ static int adis16400_stop_device(struct iio_dev *indio_dev)

  static int adis16400_initial_setup(struct iio_dev *indio_dev)
  {
-	int ret;
-	u16 prod_id, smp_prd;
-	unsigned int device_id;
  	struct adis16400_state *st = iio_priv(indio_dev);
+	uint16_t prod_id, smp_prd;
+	unsigned int device_id;
+	int ret;

  	/* use low spi speed for init if the device has a slow mode */
  	if (st->variant->flags & ADIS16400_HAS_SLOW_MODE)
@@ -224,8 +222,8 @@ static int adis16400_initial_setup(struct iio_dev *indio_dev)
  					device_id, prod_id);

  		dev_info(&indio_dev->dev, "%s: prod_id 0x%04x at CS%d (irq %d)\n",
-		       indio_dev->name, prod_id,
-		       st->adis.spi->chip_select, st->adis.spi->irq);
+			indio_dev->name, prod_id,
+			st->adis.spi->chip_select, st->adis.spi->irq);
  	}
  	/* use high spi speed if possible */
  	if (st->variant->flags & ADIS16400_HAS_SLOW_MODE) {
@@ -247,7 +245,7 @@ static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
  			      adis16400_read_frequency,
  			      adis16400_write_frequency);

-static const u8 adis16400_addresses[] = {
+static const uint8_t adis16400_addresses[] = {
  	[ADIS16400_SCAN_GYRO_X] = ADIS16400_XGYRO_OFF,
  	[ADIS16400_SCAN_GYRO_Y] = ADIS16400_YGYRO_OFF,
  	[ADIS16400_SCAN_GYRO_Z] = ADIS16400_ZGYRO_OFF,
@@ -257,15 +255,12 @@ static const u8 adis16400_addresses[] = {
  };

  static int adis16400_write_raw(struct iio_dev *indio_dev,
-			       struct iio_chan_spec const *chan,
-			       int val,
-			       int val2,
-			       long mask)
+	struct iio_chan_spec const *chan, int val, int val2, long info)
  {
  	struct adis16400_state *st = iio_priv(indio_dev);
  	int ret, sps;

-	switch (mask) {
+	switch (info) {
  	case IIO_CHAN_INFO_CALIBBIAS:
  		mutex_lock(&indio_dev->mlock);
  		ret = adis_write_reg_16(&st->adis,
@@ -273,8 +268,10 @@ static int adis16400_write_raw(struct iio_dev *indio_dev,
  		mutex_unlock(&indio_dev->mlock);
  		return ret;
  	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
-		/* Need to cache values so we can update if the frequency
-		   changes */
+		/*
+		 * Need to cache values so we can update if the frequency
+		 * changes.
+		 */
  		mutex_lock(&indio_dev->mlock);
  		st->filt_int = val;
  		/* Work out update to current value */
@@ -293,16 +290,13 @@ static int adis16400_write_raw(struct iio_dev *indio_dev,
  }

  static int adis16400_read_raw(struct iio_dev *indio_dev,
-			      struct iio_chan_spec const *chan,
-			      int *val,
-			      int *val2,
-			      long mask)
+	struct iio_chan_spec const *chan, int *val, int *val2, long info)
  {
  	struct adis16400_state *st = iio_priv(indio_dev);
+	int16_t val16;
  	int ret;
-	s16 val16;

-	switch (mask) {
+	switch (info) {
  	case IIO_CHAN_INFO_RAW:
  		return adis_single_conversion(indio_dev, chan, 0, val);
  	case IIO_CHAN_INFO_SCALE:
@@ -721,13 +715,14 @@ static const struct adis_data adis16400_data = {

  static int adis16400_probe(struct spi_device *spi)
  {
-	int ret;
  	struct adis16400_state *st;
-	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
-	if (indio_dev == NULL) {
-		ret =  -ENOMEM;
-		goto error_ret;
-	}
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = iio_device_alloc(sizeof(*st));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
  	st = iio_priv(indio_dev);
  	/* this is only used for removal purposes */
  	spi_set_drvdata(spi, indio_dev);
@@ -767,14 +762,12 @@ error_cleanup_buffer:
  	adis_cleanup_buffer_and_trigger(&st->adis, indio_dev);
  error_free_dev:
  	iio_device_free(indio_dev);
-error_ret:
  	return ret;
  }

-/* fixme, confirm ordering in this function */
  static int adis16400_remove(struct spi_device *spi)
  {
-	struct iio_dev *indio_dev =  spi_get_drvdata(spi);
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
  	struct adis16400_state *st = iio_priv(indio_dev);

  	iio_device_unregister(indio_dev);


--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux